Reduction of the environmental impact of wastewater from the pretreatment of biodiesel production: A hybrid proposal for decontamination via photo-electro-Fenton/Fered/O3.

Complex wastewater is generated during biodiesel production. We propose a new solution for the treatment of wastewater from enzymatic pretreatment of biodiesel production (WEPBP) by using a hybrid system based on the photo-Fered-Fenton process with O3 assistance (PEF-Fered-O3). We applied response surface methodology (RSM) to determine the suitable conditions for the PEF-Fered-O3 process: a current intensity of 3 A, an initial solution pH controlled at 6.4, an initial H2O2 concentration of 12,000 mg L-1, and an O3 concentration of 50 mg L-1. We performed three new experiments under similar conditions with slight changes to the conditions, namely a longer reaction time (120 min) and single or periodic H2O2 addition (i.e., small H2O2 additions at different reaction times). Periodic H2O2 addition provided the best removal results probably by reducing the occurrence of undesired side reactions that cause hydroxyl radical (•OH) scavenging. With the application of the hybrid system, the chemical oxygen demand (COD) and total organic carbon (TOC) decreased by 91% and 75%, respectively. We also evaluated the presence of metals such as iron, copper, and calcium; electric conductivity; and voltage at 5, 10, 15, 30, 45, 60, 90, and 120 min. We submitted raw and treated WEPBP sludge samples to X-ray diffraction to study the degree of crystallinity. There was a rearrangement of the compounds present in treated WEPBP, possibly caused by oxidation of a large fraction of organic matter. Finally, we evaluated the genotoxicity and cytotoxicity of WEPBP by using Allium cepa meristematic root cells. Treated WEPBP was less toxic to these cells, denoted by improvements in gene regulation and cell morphology. Given the current scenario for the biodiesel industry, applying the proposed hybrid PEF-Fered-O3 system at suitable conditions provides an efficient alternative to treat a complex matrix, namely WEPBP, to reduce its potential to cause abnormalities in the cells of living organisms. Thus, the negative impacts of the discharge of WEPBP in the environment might be reduced.

New hybrid strategy of the photo-Fered-Fenton process assisted by O3 for the degradation of wastewater from the pretreatment of biodiesel production.

The present work aims to fill a scientific gap regarding the treatment of wastewater from the enzymatic pretreatment of biodiesel production (WEPBP), as well as the identification of organic contaminants present in this complex matrix. Different treatment strategies were proposed for the removal of total organic carbon (TOC) and chemical oxygen demand (COD) from WEPBP. The interesting combination of O3/H2O2/UV-Vis and electrocoagulation (EC) process was studied in two setups, with the EC process applied prior to O3/H2O2/UV-Vis and vice versa. Further, the innovative hybrid system based on the photo-Fered-Fenton process with O3 addition (PEF-Fere-O3) was preliminarily studied for WEPBP treatment. The hybrid system provided the best results for the WEPBP treatment when the reactor was operated at pH of 4.5, 65 mg O3 L-1 and 10000 mg H2O2 L-1, UV-Vis was used as the irradiation source, and the current intensity of 3.0 A. Removals of 45% of TOC and 68.7% of COD were reached within 45 min. Oleic acid, linoleic acid, and Diisooctyl phthalate (DIOP) were the main organic contaminants identified in the WEPBP as determined by Gas Chromatography-Mass Spectrometry (GC-MS) analysis. Acute toxicity assays with the bio indicator Artemia salina were carried out in untreated and treated WEPBP samples, indicating that the PEF-Fere-O3 treatment decreased the amount of contaminants present in the WEPBP as well as reduced the toxicity levels and increased biodegradability index, suggesting its great potential for the treatment of complex industrial wastewaters.

Oxidative degradation and mineralization of the endocrine disrupting chemical bisphenol-A by an eco-friendly system based on UV-solar/H2O2 with reduction of genotoxicity and cytotoxicity levels.

A solar-driven advanced oxidation process at a lab scale was studied for the degradation and mineralization of the known endocrine disrupting chemical (EDC), bisphenol A (BPA). Preliminary tests were performed varying the irradiation source, BPA/H2O2 ratio, temperature, initial H2O2 concentration, initial solution pH, and initial BPA concentration, then, the operational conditions of the UV-solar/H2O2 were optimized by a response surface methodology (RSM), providing the following responses: UV-solar/H2O2 process at pH 3.0, [BPA]0 = 25 mg L-1, [H2O2] = 350 mg L-1, T = 50 °C, achieving BPA degradation of 77.4% and BPA mineralization of 38.2%, H2O2 consumption of 230 mg L-1. From the optimized condition, different pH ranges were tested (3.0; 5.0; 7.0; 9.0; and 11.0), where, at solution pH 5.0 the best removal rates were achieved (89.2% BPA degradation and 49.0% BPA mineralization). The BPA amount in solution was monitored by High Performance Liquid Chromatography (HPLC) and a study of the intermediate reaction by-products was performed by Gas Chromatography-Mass Spectrometry (GC-MS) analyses, highlighting the lower amount of by-products identified when the solution pH 5.0 was employed, rather than the solution pH 3.0. Genotoxicity tests with Zebrafish (Danio rerio) and cytotoxicity tests with Allium cepa were performed aiming to evaluate errors in the cells and nuclear abnormalities of the tested organisms induced by BPA raw samples, as well as by the BPA samples treated by the UV-solar/H2O2 process. Therefore, the bio-toxicity levels for an animal and a vegetal bio-indicator were reduced by applying a renewable source of energy as the irradiation source for the UV/H2O2 process, representing an efficient and eco-friendly alternative for BPA treatment in aqueous solutions.

Occurrence, statutory guideline values and removal of contaminants of emerging concern by Electrochemical Advanced Oxidation Processes: A review.

A wide variety of chemical compounds are used in human activities; however, part of these compounds reach surface water, groundwater and even water considered for potable uses. Due to the limited efficiency of water treatment by the Water and Wastewater Treatment Plants, the presence of these compounds in natural and human consumption waters can be very harmful due to their high persistence and adverse effects; these characteristics define the contaminants of emerging concern (CECs). Water treatment by Electrochemical Advanced Oxidation Processes (EAOPs) has been evaluated as a promising process for the removal of persistent and recalcitrant organic contaminants. With this background, the present review aims to gather studies and information published between 2015 and 2020 regarding the occurrence of CECs in surface, potable and groundwater, its treatment by EAOPs, the main operating conditions and by-product generation of EAOPs, contaminant toxicity assessments and international statutory guideline values concerning CEC standards and allowable concentrations in the environment and treated drinking water. Therefore, in this review it was found that the compounds bisphenol A (BPA), diethyltoluamide (DEET), 17α-ethinyl estradiol (EE2), perfluorobutanoic acid (PFBA), carbamazepine, caffeine and atrazine were the most frequently detected in water sources, with concentrations ranging from 35.54-4800, 1.21-98, 0.005-38.5, 5-742.904, 0.0071-586, 0.89-1040, and 100-323 (ng L-1), respectively. Among the operational conditions of EAOPs, current density, pH and oxidant concentration are the main operational parameters that have an influence on these treatment technologies, besides the by-products generated, which might be removed by the integration of EAOPs with biological digestion treatments. Regarding the values of water quality standards, many CECs do not have established standard allowable concentration values, which represents a concern toward the possible toxic effects of these compounds on non-target organisms.

Landfill leachate treatment by a boron-doped diamond-based photo-electro-Fenton system integrated with biological oxidation: A toxicity, genotoxicity and by products assessment.

A photo-electro-Fenton (PEF) reactor employing boron-doped diamond (BDD) and soft iron anodes was studied in landfill leachate (LL) treatment. The reactor operation parameters (ROP) H2O2 concentration, current intensity and flow rate were investigated in the removal of Abs 254 nm. The PEF process with BDD anode, operating at the best operational conditions, was used as a pre-treatment and enabled biological oxidation (BO). The treatment strategy of PEF followed by BO showed to be the most efficient, reaching reductions of 77.9% chemical oxygen demand (COD), 71.5% total carbon (TC) and 76.3% radiation absorbance in 254 nm (Abs 254 nm), as well as a significant reduction in the genotoxicity (Allium cepa), observed by an increase in the mitotic index (MI) (131.5%) and decrease in the abnormalities (47.8%). The reduction of the toxic potential of LL using the integration of processes was also observed in the gas chromatography-mass spectrometry (GC-MS) byproducts analysis, which indicated the removal of emerging contaminants, such as Bisphenol-A (BPA), N,N-Diethyl-3-methylbenzamide (DEET) and Diisooctyl phthalate (DIOP). Thus, the PEF process integrated with BO presented a considerable efficiency in the removal of contaminants present in LL, becoming an alternative for the minimization of the environmental impacts caused by the discharge of this effluent in the environment.

Surface water pollution by pharmaceuticals and an alternative of removal by low-cost adsorbents: A review.

Micropollutants, also called emerging contaminants, consist of an extensive group of synthetic and natural substances, including pharmaceuticals, personal care products, steroid hormones, and agrochemicals. Currently, the monitoring of residual pharmaceuticals in the environment has been highlighted due to the fact that many of these substances are found in wastewater treatment plants effluents and surface waters, in concentrations ranging from ng L-1 to µg L-1. Most of these compounds are discharged into the environment continuously through domestic sewage treatment systems. In the present work, it is presented an overview of water pollution by these pollutants, as well as a review of the recent literature about the use of low-cost adsorbents for the removal of the main pharmaceuticals found in surface water, focusing on municipal and agroindustrial wastes as precursors. It was possible to observe several examples of high adsorption capacities of these compounds with such materials, however other aspects must be considered in order to evaluate the real applicability in water and wastewater treatment, such as competition, recyclability and production cost.