ABSTRACT
In recent years, cobalt ferrite has attracted considerable attention due to its unique physical properties. The present study aimed to produce cobalt ferrite magnetic nanoparticles doped with zinc and vanadium using the sol-gel auto-combustion method. For this purpose, Co1-xZnxFe2-yVyO4 (where x = 0.0, 0.1, 0.2, 0.5 and y = 0.00, 0.05, 0.15, 0.25) precursors were calcined at 800 °C for 3 h. The prepared samples were characterized with the X-ray diffraction (XRD) method in combination with Rietveld structure refinement, field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometery (VSM). The XRD patterns confirmed the formation of crystalline spinel structure for all samples. However, the diffraction peaks of hematite and iron vanadium oxide phases were observed in the patterns of some doped samples. The average crystallite size for all the synthesized samples was found to be in the range of ~45-24 nm, implying that it decreased by simultaneously doping cobalt ferrite with Zn and V. The FT-IR spectrum confirmed the formation of the spinal structure of ferrite through the observed vibrational bands assigned to the tetrahedral (υ2) and octahedral (υ1) interstitial complexes in the spinel structure. The FE-SEM images showed that morphology, average grain size, and agglomeration of the synthesized powders were affected by doping, which was due to the interactions of the magnetic surface of nanoparticles. The VSM curves demonstrated that saturation magnetization and coercivity values changed in the range of 30-83 emu/g and from 27-913 Oe, respectively. These changes occurred due to the alteration in cation distribution in the spinel structure. This can be attributed to the change in superexchange interactions between magnetic ions by co-substitution of Zn and V ions in Cobalt ferrite and the changes in magnetocrystalline anisotropy.
ABSTRACT
In the present study, (Fe41Co7Cr15Mo14Y2C15B6)100-xCux (x = 0, 0.25 and 0.5 at.%) amorphous alloys were prepared by copper-mold casting. To clarify the effect of the minor addition of copper on the mechanism of nucleation and growth during the crystallization process, an isokinetic analysis was performed. The activation energies (E) of the various crystallization stages were calculated by using theoretical models including Kissinger-Akahira-Sunose (KAS), Flynn-Wall-Ozawa (FWO), Augis-Bennett and Gao-Wang methods. In addition, Augis-Bennett, Gao-Wang and Matusita methods were used to investigate the nucleation and growth mechanisms and to determine other kinetic parameters including Avrami exponent (n), the rate constant (Kp) and dimensionality of growth (m). The obtained results revealed that the activation energy-as well as thermal stability-was changed with minor addition of copper. In addition, the obtained Avrami exponent values were confirmed by Johnson-Mehl-Avrami-Kolmogorov (JMAK) method. The research findings demonstrated that the value of Avrami exponent is changed with minor addition of copper, so that the Avrami exponents of all crystallization stages, except the second peak for copper-free amorphous alloy, were equal to integer values ranging from two to four, indicating that the growth mechanisms were controlled by interface. Moreover, the kinetic parameters of n and b for all peaks were increased by an increase in crystallization temperature, which can be attributed to the increase in the nucleation rate.
