Impacts of Glucose-Dependent Insulinotropic Polypeptide on Orthodontic Tooth Movement-Induced Bone Remodeling.

Glucose-dependent insulinotropic polypeptide (GIP) exerts extra-pancreatic effects via the GIP receptor (GIPR). Herein, we investigated the effects of GIP on force-induced bone remodeling by orthodontic tooth movement using a closed-coil spring in GIPR-lacking mice (GIPRKO) and wild-type mice (WT). Orthodontic tooth movements were performed by attaching a 10-gf nickel titanium closed-coil spring between the maxillary incisors and the left first molar. Two weeks after orthodontic tooth movement, the distance of tooth movement by coil load was significantly increased in GIPRKO by 2.0-fold compared with that in the WT. The alveolar bone in the inter-root septum from the root bifurcation to the apex of M1 decreased in both the GIPRKO and WT following orthodontic tooth movement, which was significantly lower in the GIPRKO than in the WT. The GIPRKO exhibited a significantly decreased number of trabeculae and increased trabecular separation by orthodontic tooth movement compared with the corresponding changes in the WT. Histological analyses revealed a decreased number of steady-state osteoblasts in the GIPRKO. The orthodontic tooth movement induced bone remodeling, which was demonstrated by an increase in osteoblasts and osteoclasts around the forced tooth in the WT. The GIPRKO exhibited no increase in the number of osteoblasts; however, the number of osteoclasts on the coil-loaded side was significantly increased in the GIPRKO compared with in the WT. In conclusion, our results demonstrate the impacts of GIP on the dynamics of bone remodeling. We revealed that GIP exhibits the formation of osteoblasts and the suppression of osteoclasts in force-induced bone remodeling.

UV Light-Generated Superhydrophilicity of a Titanium Surface Enhances the Transfer, Diffusion and Adsorption of Osteogenic Factors from a Collagen Sponge.

It is a significant challenge for a titanium implant, which is a bio-inert material, to recruit osteogenic factors, such as osteoblasts, proteins and blood effectively when these are contained in a biomaterial. The objective of this study was to examine the effect of ultraviolet (UV)-treatment of titanium on surface wettability and the recruitment of osteogenic factors when they are contained in an atelocollagen sponge. UV treatment of a dental implant made of commercially pure titanium was performed with UV-light for 12 min immediately prior to the experiments. Superhydrophilicity on dental implant surfaces was generated with UV-treatment. The collagen sponge containing blood, osteoblasts, or albumin was directly placed on the dental implant. Untreated implants absorbed only a little blood from the collagen sponge, while the UV-treated implants absorbed blood rapidly and allowed it to spread widely, almost over the entire implant surface. Blood coverage was 3.5 times greater for the UV-treated implants (p < 0.001). Only 6% of the osteoblasts transferred from the collagen sponge to the untreated implants, whereas 16% of the osteoblasts transferred to the UV-treated implants (p < 0.001). In addition, a weight ratio between transferred albumin on the implant and measured albumin adsorbed on the implant was 17.3% in untreated implants and 38.5% in UV-treated implants (p < 0.05). These results indicated that UV treatment converts a titanium surface into a superhydrophilic and bio-active material, which could recruite osteogenic factors even when they were contained in a collagen sponge. The transfer and subsequent diffusion and adsorption efficacy of UV-treated titanium surfaces could be useful for bone formation when titanium surfaces and osteogenic factors are intervened with a biomaterial.

Novel Osteogenic Behaviors around Hydrophilic and Radical-Free 4-META/MMA-TBB: Implications of an Osseointegrating Bone Cement.

Poly(methyl methacrylate) (PMMA)-based bone cement, which is widely used to affix orthopedic metallic implants, is considered bio-tolerant but lacks osteoconductivity and is cytotoxic. Implant loosening and toxic complications are significant and recognized problems. Here we devised two strategies to improve PMMA-based bone cement: (1) adding 4-methacryloyloxylethyl trimellitate anhydride (4-META) to MMA monomer to render it hydrophilic; and (2) using tri-n-butyl borane (TBB) as a polymerization initiator instead of benzoyl peroxide (BPO) to reduce free radical production. Rat bone marrow-derived osteoblasts were cultured on PMMA-BPO, common bone cement ingredients, and 4-META/MMA-TBB, newly formulated ingredients. After 24 h of incubation, more cells survived on 4-META/MMA-TBB than on PMMA-BPO. The mineralized area was 20-times greater on 4-META/MMA-TBB than PMMA-BPO at the later culture stage and was accompanied by upregulated osteogenic gene expression. The strength of bone-to-cement integration in rat femurs was 4- and 7-times greater for 4-META/MMA-TBB than PMMA-BPO during early- and late-stage healing, respectively. MicroCT and histomorphometric analyses revealed contact osteogenesis exclusively around 4-META/MMA-TBB, with minimal soft tissue interposition. Hydrophilicity of 4-META/MMA-TBB was sustained for 24 h, particularly under wet conditions, whereas PMMA-BPO was hydrophobic immediately after mixing and was unaffected by time or condition. Electron spin resonance (ESR) spectroscopy revealed that the free radical production for 4-META/MMA-TBB was 1/10 to 1/20 that of PMMA-BPO within 24 h, and the substantial difference persisted for at least 10 days. The compromised ability of PMMA-BPO in recruiting cells was substantially alleviated by adding free radical-scavenging amino-acid N-acetyl cysteine (NAC) into the material, whereas adding NAC did not affect the ability of 4-META/MMA-TBB. These results suggest that 4-META/MMA-TBB shows significantly reduced cytotoxicity compared to PMMA-BPO and induces osteoconductivity due to uniquely created hydrophilic and radical-free interface. Further pre-clinical and clinical validations are warranted.

Suppression of tooth movement-induced sclerostin expression using ß-adrenergic receptor blockers.

OBJECTIVE: Regulation of bone metabolism by the sympathetic nervous system has recently been clarified. Tooth movement is increased by increased bone metabolic turnover due to sympathetic activation. This study aimed to compare the effects of the ß-adrenergic receptor (ß-AR) blockers atenolol (ß1-AR blocker), butoxamine (ß2-AR blocker) and propranolol (non-selective ß-AR blocker) on tooth movement in spontaneously hypertensive rats (SHR) with sympathicotonia. MATERIALS AND METHODS: Spontaneously hypertensive rats were divided into the following four groups: an SHR control group and groups treated with 0.1 mg/kg atenolol, 1 mg/kg butoxamine or 1 mg/kg propranolol (n = 6 rats/group). Atenolol, butoxamine or propranolol was administered daily to each treatment group, and orthodontic force was applied using a closed-coil spring. Finally, immunohistochemical analysis was performed for receptor activator of nuclear factor kappa-B ligand (RANKL) and sclerostin (SOST). RESULTS: Atenolol, butoxamine and propranolol inhibited tooth movement and increased maxillary alveolar bone volume. Histological analysis revealed that these ß-AR blockers decreased osteoclast activity on the compression side. Furthermore, immunohistochemical analysis revealed that atenolol, butoxamine and propranolol decreased the number of RANKL- and SOST-positive osteocytes on the compression side. CONCLUSIONS: ß-AR blockers decreased tooth movement and downregulated SOST in osteocytes, accompanied by increasing alveolar bone resorption.

Biological and Physicochemical Characteristics of 2 Different Hydrophilic Surfaces Created by Saline-Storage and Ultraviolet Treatment.

OBJECTIVES: Hydrophilicity/hydrophobicity of titanium surfaces may affect osseointegration. Ordinary titanium surfaces are hydrophobic. Recently, 2 different methods of storing titanium in saline solution or treating it with ultraviolet (UV) light were introduced to generate surface hydrophilicity. This study compared biological and physicochemical properties of 2 different hydrophilic titanium surfaces created by these methods. MATERIALS: Acid-etched control, saline-stored, and UV-treated titanium surfaces were assessed by scanning electron microscopy, energy dispersive spectroscopy, and x-ray photoelectron spectroscopy. The attachment, spreading behaviors, mineralization, and gene expression of osteoblasts were examined. RESULTS: Similar microroughness was found on control and UV-treated surfaces, whereas foreign deposits were observed on saline-stored surfaces. Control and UV-treated surfaces consisted of Ti, O, and C, whereas saline-stored surfaces showed Na and Cl in addition to these 3 elements. Atomic percentage of surface carbon was higher in order of control, saline-stored, and UV-treated surfaces. Osteoblasts cultured on saline-stored surfaces showed higher levels of calcium deposition and collagen I expression than control. Osteoblasts on UV-treated surfaces showed significantly increased levels for all parameters related to cell attachment, cell spreading, the expression of adhesion and cytoskeletal proteins, mineralization, and gene expression compared with control, outperforming saline-stored surfaces for most parameters. CONCLUSION: Despite similar hydrophilicity, saline-stored and UV light-treated surfaces showed substantially different biological effects on osseointegration, associated with different surface chemistry and morphology.

CXCR4+ CD45- Cells are Niche Forming for Osteoclastogenesis via the SDF-1, CXCL7, and CX3CL1 Signaling Pathways in Bone Marrow.

Bone homeostasis comprises the balance between bone-forming osteoblasts and bone-resorbing osteoclasts (OCs), with an acceleration of osteoclastic bone resorption leading to osteoporosis. OCs can be generated from bone marrow cells (BMCs) under the tightly regulated local bone environment. However, it remained difficult to identify the critical cells responsible for providing an osteoclastogenesis niche. In this study, we used a fluorescence-activated cell sorting technique to determine the cell populations important for forming an appropriate microenvironment for osteoclastogenesis and to verify the associated interactions between osteoclast precursor cells and non-OCs. We isolated and removed a small cell population specific for osteoclastogenesis (CXCR4+ CD45- ) from mouse BMCs and cultured the remaining cells with receptor activator of nuclear factor-kappa B ligand (RANKL) and macrophage-colony stimulating factor. The resulting cultures showed significantly less large osteoclast formation. Quantitative RT-PCR analysis revealed that these CXCR4+ CD45- cells expressed low levels of RANK and RANKL, but high levels of critical chemokines including stromal cell derived factor 1 (SDF-1), chemokine (C-X-C motif) ligand 7 (CXCL7), and chemokine (C-X3-C motif) ligand 1 (CX3CL1). Furthermore, an SDF-1-specific antibody strongly suppressed OC formation in RAW264.7 cells and antibodies against SDF-1, CXCL7, and CX3CL1 suppressed OC formation in BMCs. These results suggest that isolated CXCR4+ CD45- cells support an appropriate microenvironment for osteoclastogenesis with a direct effect on the cells expressing SDF-1, CXCL7, and CX3CL1 receptors. The regulation of CXCR4+ CD45- cell function might therefore inform therapeutic strategies for diseases involving loss of bone homeostasis. Stem Cells 2016;34:2733-2743.

Effect of UV-photofunctionalization on oral bacterial attachment and biofilm formation to titanium implant material.

Bacterial biofilm infections remain prevalent reasons for implant failure. Dental implant placement occurs in the oral environment, which harbors a plethora of biofilm-forming bacteria. Due to its trans-mucosal placement, part of the implant structure is exposed to oral cavity and there is no effective measure to prevent bacterial attachment to implant materials. Here, we demonstrated that UV treatment of titanium immediately prior to use (photofunctionalization) affects the ability of human polymicrobial oral biofilm communities to colonize in the presence of salivary and blood components. UV-treatment of machined titanium transformed the surface from hydrophobic to superhydrophilic. UV-treated surfaces exhibited a significant reduction in bacterial attachment as well as subsequent biofilm formation compared to untreated ones, even though overall bacterial viability was not affected. The function of reducing bacterial colonization was maintained on UV-treated titanium that had been stored in a liquid environment before use. Denaturing gradient gel-electrophoresis (DGGE) and DNA sequencing analyses revealed that while bacterial community profiles appeared different between UV-treated and untreated titanium in the initial attachment phase, this difference vanished as biofilm formation progressed. Our findings confirm that UV-photofunctionalization of titanium has a strong potential to improve outcome of implant placement by creating and maintaining antimicrobial surfaces.

Anticipation of uterine bleeding in placenta previa based on vaginal sonographic evaluation.

OBJECTIVES: The aim of this study was to predict massive uterine bleeding during pregnancy and cesarean section in women with placenta previa using transvaginal ultrasonography. METHODS: Transvaginal ultrasonography was performed prospectively at and after 28 gestational weeks with follow-up scans at 5- to 7-day intervals until cesarean section in 35 women with placenta previa. The patients were classified into 3 groups based on the following sonographic features of the placental edge in relation to the internal cervical os: type A = two thirds of the placenta from the placental center overlapping the internal os (13 cases); type B = one third of the placenta from the periphery to outside overlapping the internal os (10 cases), and type C = echo-free space (EFS) in the placental edge overlapping the internal os (12 cases). In some cases of type-A placentas, lacunae with blood flow in the placenta from the basal plate to the chorionic plate were also observed. All types were further subdivided based on the presence or absence of associated sponge-like echo (S-echo) in the wall of the uterus adjacent to the placental location. In each type, the relation with the amount of bleeding during hospitalization and preterm delivery was examined. RESULTS: Incidences of sudden massive bleeding during hospitalization were 7.7% (1/13), 10.0% (1/10), and 83.3% (10/12), in types A, B and C, respectively, being significantly higher in type C (p < 0.01). The risk of antepartum massive bleeding was also significantly higher in type C (p < 0.01). The incidence of preterm delivery due to sudden massive bleeding and the amount of bleeding during cesarean section were significantly higher in type A + S and type A + S with lacunae, respectively. CONCLUSIONS: Sonographic EFS in the lower edge of the placenta overlying the cervix indicates the risk of sudden massive antepartum bleeding. Furthermore, lacunae with sponge-like echo may also reflect the risk of massive bleeding at cesarean section. These findings warrant further observational studies to verify their clinical implications.