Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add more filters










Database
Language
Publication year range
1.
ACS Appl Mater Interfaces ; 14(13): 15415-15425, 2022 Apr 06.
Article in English | MEDLINE | ID: mdl-35347994

ABSTRACT

Atomically thin two-dimensional (2D) materials have gained significant attention from the research community in the fabrication of high-performance optoelectronic devices. Even though there are various techniques to improve the responsivity of the photodetector, the key factor limiting the performance of the photodetectors is constrained photodetection spectral range in the electromagnetic spectrum. In this work, a mixed-dimensional 0D/2D SnS2-QDs/monolayer MoS2 hybrid is fabricated for high-performance and broadband (UV-visible-near-infrared (NIR)) photodetector. Monolayer MoS2 is deposited on SiO2/Si using chemical vapor deposition (CVD), and SnS2-QDs are prepared using a low-cost solution-processing method. The high performance of the fabricated 0D/2D photodetector is ascribed to the band bending and built-in potential created at the junction of SnS2-QDs and MoS2, which enhances the injection and separation efficiency of the photoexcited charge carriers. The mixed-dimensional structure also suppresses the dark current of the photodetector. The decorated SnS2-QDs on monolayer MoS2 not only improve the performance of the device but also extends the spectral range to the UV region. Photoresponsivity of the device for UV, visible, and NIR region is found to be ∼278, ∼ 435, and ∼189 A/W, respectively. Fabricated devices showed maximum responsivity under the visible region attributed to the high absorbance of monolayer MoS2. The response time of the fabricated device is measured as ∼100 ms. These results reveal that the development of a mixed-dimensional (0D/2D) SnS2-QDs/MoS2-based high-performance and broadband photodetector is technologically promising for next-generation optoelectronic applications.

2.
J Nanobiotechnology ; 19(1): 401, 2021 Dec 04.
Article in English | MEDLINE | ID: mdl-34863214

ABSTRACT

Antibiotic resistance is spreading rapidly around the world and seriously impeding efforts to control microbial infections. Although nucleic acid testing is widely deployed for the detection of antibiotic resistant bacteria, the current techniques-mainly based on polymerase chain reaction (PCR)-are time-consuming and laborious. There is an urgent need to develop new strategies to control bacterial infections and the spread of antimicrobial resistance (AMR). The CRISPR-Cas system is an adaptive immune system found in many prokaryotes that presents attractive opportunities to target and edit nucleic acids with high precision and reliability. Engineered CRISPR-Cas systems are reported to effectively kill bacteria or even revert bacterial resistance to antibiotics (resensitizing bacterial cells to antibiotics). Strategies for combating antimicrobial resistance using CRISPR (i.e., Cas9, Cas12, Cas13, and Cas14) can be of great significance in detecting bacteria and their resistance to antibiotics. This review discusses the structures, mechanisms, and detection methods of CRISPR-Cas systems and how these systems can be engineered for the rapid and reliable detection of bacteria using various approaches, with a particular focus on nanoparticles. In addition, we summarize the most recent advances in applying the CRISPR-Cas system for virulence modulation of bacterial infections and combating antimicrobial resistance.


Subject(s)
Bacteria , Bacterial Infections , CRISPR-Cas Systems/genetics , Drug Resistance, Bacterial , Animals , Bacteria/genetics , Bacteria/pathogenicity , Bacterial Infections/diagnosis , Bacterial Infections/microbiology , Bacterial Infections/prevention & control , Drug Delivery Systems , Humans , Mice
3.
Nanotechnology ; 32(45)2021 Aug 17.
Article in English | MEDLINE | ID: mdl-34340228

ABSTRACT

This work demonstrates the fabrication of tellurium-nanowires (Te-NWs)/paper based device encapsulated using laser assisted mircopyramid patterned polydimethylsiloxane (PDMS) films. Although there are multiple reports published on 1D Te, most of them are limited to establishing its properties and studying its behavior as a sensor and research on the utilization of Te-NWs for physical sensors remain unexplored. Further, reports on p-type photodetectors also remain scarce. The fabricated Te-NWs/paper with micropyramid structured PDMS films encapsulation was used as a strain sensor, and it exhibited considerable improvement (∼60%) in sensitivity compared to smooth PDMS films. The gauge factor of the developed strain sensor was found to be âˆ¼15.3. In addition, fabricated Te-NWs/paper device with contacts was used as a photodetector and it showed photoresponsivity of âˆ¼22.5 mA W-1and âˆ¼14.5 mA W-1in visible and NIR regions, respectively. Furthermore, the device exhibited long-term mechanical stability under harsh deformations. Fabricated 1D Te-NWs/paper device was utilized as a strain sensor to monitor the angular movements in the human body and successfully monitored various human motions, including wrist bending, finger knuckle, elbow joint, and knee joint. The successful demonstration of Te-NWs based physical sensors and utilization in broadband photodetectors opens avenues of research for tellurium based flexible and wearable devices.

4.
J Mater Chem B ; 8(44): 10182-10189, 2020 11 18.
Article in English | MEDLINE | ID: mdl-33103693

ABSTRACT

The monitoring of respiratory disorders requires breath sensors that are fast, robust, and convenient to use and can function under real time conditions. A MOF based flexible sensor is reported for the first time for breath sensing applications. The properties of a highly porous HKUST-1 MOF and a conducting MoS2 material have been combined to fabricate an electronic sensor on a flexible paper support for studying sleep apnea problems. Extensive breath sensing experiments have been performed and interestingly the fabricated sensor is efficient in detecting various kinds of breaths such as deep, fast, slow and hydrated breath. The MOF breath sensor shows a fast response time of just ∼0.38 s and excellent stability with no decline in its performance even after a month. A plausible mechanism has been proposed and a smartphone based prototype has been prepared to demonstrate the real time applications of the hybrid device. This work demonstrates great potential for the application of MOFs in healthcare with a special focus on breath sensing and sleep apnea diagnosis.


Subject(s)
Biosensing Techniques/methods , Cost-Benefit Analysis/methods , Metal-Organic Frameworks/chemistry , Respiratory Mechanics/physiology , Sleep Apnea Syndromes/diagnosis , Wearable Electronic Devices , Biosensing Techniques/economics , Humans , Masks/economics , Metal-Organic Frameworks/economics , Metal-Organic Frameworks/metabolism , Sleep Apnea Syndromes/economics , Sleep Apnea Syndromes/metabolism , Thermogravimetry/methods , Wearable Electronic Devices/economics
SELECTION OF CITATIONS
SEARCH DETAIL
...