Chironomid midge sensitization in sewage workers: case study.

Non-biting chironomid midges (Diptera: Chironomidae) may cause sensitization and allergic reactions in humans and have recently been identified as a potential health problem in Swedish municipal sewage treatment plants. To investigate, on a pilot scale, the allergenic potential of chironomids in sewage workers, all workers (n = 8) at a sewage treatment plant and local controls (n = 16) completed a symptom questionnaire, underwent measurement of the fraction of nitric oxide in exhaled air, spirometry, and provided serum samples for the determination of atopy status and the prevalence of specific immunoglobulin E (IgE) antibodies against Chironomus thummi (Chi t) using a commercial fluorescence enzyme immunoassay (FEIA). Three sewage workers (38%) but no controls (0%) were FEIA positive for C. thummi-specific IgE antibodies (P < 0.05). No other health-related findings were significantly different between the groups. The study suggested that occupational exposure to Chironomids may cause sensitization with circulating IgE-antibodies in sewage workers.

Availability and comparability of human biomonitoring data across Europe: a case-study on blood-lead levels.

Recently, it has become clear that the complexity of environmental health issues requires an approach that takes into account the complexities, interdependencies and uncertainties of the real world. An urgent issue that has surfaced is the need for accurate tools to better describe exposure characterization to environmental chemicals. By including human biomonitoring (HBM) data, a greater precision in exposure and associated risk estimates and more accurate dose-response relationships may be achieved. A restricting issue still is the availability of reliable and comparable HBM data. The aim of the current study was twofold: (1) to find out whether it is practically feasible to collect raw, individual HBM data across Europe; and (2) to evaluate the comparability and use of these HBM data for environmental health impact assessment at a European scale. Blood-lead (B-Pb) was selected as the chemical of choice because of its long history as an environmental pollutant in HBM programs and its known public health relevance. Through literature search and identification of HBM experts across Europe, HBM programs that measured B-Pb were identified and asked to share individual data on age, gender and B-Pb levels. Following this request, more than 20,000 individual data points from 8 European countries were collected. Analysing these data made clear that it is difficult to use disparate data collections because of the inherent variability with respect to the gender and age of participants and calendar-years sampled. When these confounders were taken however, there was no additional variability in B-Pb distributions among different countries. It was concluded that while it is possible to collect HBM data from different sources across Europe, the need to get data from comparable (sub-)populations is essential for appropriate use and interpretation of HBM data for environmental health impact assessment.

Identification of markers for PCB exposure in plasma from Swedish construction workers removing old elastic sealants.

The objective of the present study was to identify PCB-indicators of occupational exposure related to the removal of old elastic sealants. Blood samples were collected from workers involved in removing elastic sealants. Samples were also taken from age- and sex-matched controls. A majority of the exposed workers were re-sampled after 10 months. All samples were analysed for 19 PCBs. The levels in the exposed workers were twice as high as those in the controls, 575 and 267 ng g(-1) lipid, respectively, but were essentially unchanged at the second sampling. The PCB patterns also differed. Levels of many less chlorinated PCBs were much higher in the exposed workers, compared to the controls, and principal component analysis (PCA) revealed that easily metabolized PCBs decreased in the exposed workers during the study. This finding indicates that elimination exceeded uptake during the study period, and that the safety information given to the workers had been effective. PCA was also used to identify exposure markers. The relatively persistent PCBs 56/60 and 66, the easily metabolized PCBs 44, 70 and 110 (with vicinal hydrogens in meta/para-positions) and the very persistent PCBs 153 and 180 were found to be good markers for occupational, recent occupational and background (dietary) exposure, respectively. A PCA model based on these markers was equally effective in differentiating between exposed individuals and controls, and between recent and less recent exposure, as a model based on all PCBs.

Photon transport parameters of diffusive media with highly anisotropic scattering.

The dependence of the photon transport parameters on the optical characteristics of diffusive media such as biological tissue with strongly forward biased scattering is examined with respect to the influence of the large angle scattering component and higher moments of the phase function. The latter are particularly significant for the temporal evolution of the angular intensity. The P3 approximation gives clear physical insight into the influence of boundaries on the radiative flux and is applied here as an analytic method of evaluating certain phase functions reported in the literature, while higher order P(N) approximations are used to calculate accurate time-dependent angular intensity distributions of the scattered light.

Hydrofluoric acid-induced burns and life-threatening systemic poisoning--favorable outcome after hemodialysis.

BACKGROUND: Skin contact with hydrofluoric acid (HF) may cause serious burns and life-threatening systemic poisoning. The use of hemodialysis in fluoride intoxication after severe dermal exposure to HF has been recommended but not reported. CASE REPORT: A 46-year-old previously healthy man had 7% of his body surface exposed to 71% HE Despite prompt management, with subsequent normalization of the serum electrolytes, recurrent ventricular fibrillation occurred. On clinical suspicion of fluoride-induced cardiotoxicity, acute hemodialysis was performed. The circulatory status stabilized and the patient fully recovered. High fluoride levels in the urine and serum were confirmed by the laboratory. DISCUSSION: There is no ultimate proof that the favorable outcome in this case was significantly attributable to the dialysis. However, most reported exposures of this magnitude have resulted in fatal poisoning. As our patient had normal serum electrolytes and no hypoxia or acidosis at the time of his arrhythmias, it was decided that all efforts should be focused on removing fluoride from his blood. The rationale for performing hemodialysis for this purpose is clear, even though such intervention is more obviously indicated in patients with renal failure. CONCLUSION: Hemodialysis may be an effective and potentially lifesaving additional treatment for severe exposure to HF when standard management has proven insufficient.

Exposure to tremolite asbestos and respiratory health in Swedish dolomite workers.

OBJECTIVES: Deposits of carbonate rock like limestone and dolomite may contain tremolite asbestos. This study assessed the exposure to tremolite asbestos and the respiratory health of Swedish dolomite workers. METHODS: 95% of 137 eligible workers at two dolomite producing companies completed a self administered questionnaire that included questions on respiratory symptoms and were examined with spirometry as well as chest radiography. Total exposure to dust was gravimetrically measured and the tremolite asbestos content of the dust was assessed with polarisation and phase contrast microscopy. RESULTS: Dolomite dust concentrations were moderate (median 2.8 mg/m3) and tremolite asbestos concentrations were generally below the limit of detection (<0.03 fibres/ml). Somewhat higher values, around 0.1 fibres/ml, were obtained in manual stone sorting and bagging. Respiratory symptoms suggestive of chronic bronchitis were more related to smoking than to estimates of individual exposure to dust. The mean vital capacity was 0.2 l lower than expected after adjustment for sex, age, height, and smoking but the decline in lung function was not associated with current or cumulative exposure to dust in a clear cut way. Two definite cases of pleural plaques and one possible case of simple pneumoconiosis were noted, but the plaques could not be attributed exclusively to exposure to tremolite asbestos. CONCLUSIONS: Dolomite mining and milling may indeed entail low levels of exposure to tremolite asbestos, but this exposure was not a strong determinant of respiratory symptoms, lung function, or pneumoconiosis in exposed Swedish workers. This was true also for dolomite dust. The hazards of exposure to tremolite asbestos may vary across deposits, however, and additional studies at other sites of carbonate rock exploitation are warranted.

Exposure to chemical agents in Swedish aluminum foundries and aluminum remelting plants--a comprehensive survey.

Secondary aluminum melting is mainly performed in sand, die, and static die-casting foundries and remelting plants. In seven Swedish foundries and two remelting plants, the exposure and area concentrations of total dust, metals, organic gases, and vapors were determined mainly as daily, time-weighted averages (TWAs). For most combinations of jobs and agents, the exposure levels were well below the current threshold limits suggested by the American Conference of Governmental Industrial Hygienists (ACGIH). However, high exposure levels of mineral oil mist (geometric mean [GM] = 0.6 mg/m3) were observed in the die-casting process, with a maximum of 4 mg/m3. The findings were similar for total dust (GM = 5.1 mg/m3) and crystalline quartz (GM = 0.05 mg/m3) during molding operations in the sand foundries, maximum air concentrations being 31 mg/m3 and 0.22 mg/m3, respectively. Other agents which occasionally reached high exposure levels included furfuryl alcohol (up to 23 mg/m3 during furan binder use in sand foundries), aniline (up to 2.6 mg/m3 during thermal degradation of cold-box binders), and dimethylethylamine (up to 9 mg/m3) in the cold-box process used in static die-casting and sand foundries. The average aluminum exposure levels (GM = 0.043 mg/m3) were low in all foundries, individual values not exceeding 0.94 mg/m3. The exposures to metals were below 10 percent of their threshold limits. Similarly low levels were detected of polyaromatic hydrocarbons, phenol, formaldehyde, methylenebisphenyl diisocyanate, and phenylisocyanate. In the aluminum remelting plants, a few high exposure levels of total dust (GM = 1.4 mg/m3) up to 8 mg/m3 were detected in furnace workers. Aluminum and other metals were well below 10 percent of their threshold limits, with the exception of a few high concentrations of manganese, up to 0.14 mg/m3. The between-worker variability (GSDB) in the foundries for total dust, aluminum, and oil mist were on the order of 3-4. The heterogenicity of secondary aluminum melting requires assessment of a wide variety of chemical agents. For certain exposures, technical and medical monitoring programs are still needed.

Porphyrin status in aluminum foundry workers exposed to hexachlorobenzene and octachlorostyrene.

The possible interference of hexachlorobenzene and octachlorostyrene (i.e., thermal byproducts from hexachloroethane in aluminum degassing) with porphyrin metabolism was investigated in exposed workers. Urine specimens from 9 male aluminum foundry workers (i.e., smelters) at 6 different companies and from 18 controls-matched for sex, age, residence, and socioeconomic status-were analyzed for total porphyrins and porphyrin isomers. Workers exposed to hexachlorobenzene and octachlorostyrene had a statistically significant increase in urinary total porphyrins, compared with controls (mean +/- standard deviation: 13.63 +/- 11.13 micromol/mol creatinine and 6.24 +/- 3.84 micromol/mol creatinine, respectively; p = .02). The authors attributed the results mainly to differences in excretion of coproporphyrins-notably coproporphyrin III. Erythrocyte uroporphyrinogen decarboxylase activity was similar in both groups. There was a high correlation between levels of hexachlorobenzene and octachlorostyrene, respectively, in plasma and urinary excretion of porphyrins; these findings, however, relied heavily on 1 subject for whom extreme values were obtained. The results indicated that occupational exposure to hexachlorobenzene and octachlorostyrene in aluminum degassing with hexachloroethane may affect porphyrin metabolism in a manner consistent with early secondary coproporphyrinuria-the first recognized step in the development of chronic hepatic porphyria. It was also noted that changes remained detectable some years after exposure ceased.

Blood lead in Swedish police officers.

BACKGROUND: Shooting with lead-containing ammunition in firing ranges is a well-known source of lead exposure in adults, and police officers may be at risk of lead intoxication. More stringent national lead regulations stimulated a survey of blood lead (PbB) in Swedish police officers with regular shooting habits. METHODS: Police officers considered as the most active shooters on and/or off duty responded to a questionnaire about health, lifestyle, shooting habits, and potential lead exposure. Blood samples were collected and analyzed for PbB and a multivariate regression analysis was performed. RESULTS: The mean PbB in male officers (n = 75) was 0.24 mumol/L (5.0 micrograms/dL); range 0.05-0.88 mumol/L (1.0-18.2 micrograms/dL), and in female officers (n = 3) it was even lower (0.18 mumol/L; 3.7 micrograms/dL). For both sexes combined, a positive correlation (r = 0.55; P < 0.001) of PbB with the number of bullets annually fired both on and off duty was observed, and this finding remained in a multiple regression analysis including age, smoking habits, and latency from last shooting exercise. DISCUSSION: In conclusion, occupational and recreational lead exposure from firing ranges still seems to be a source of lead exposure in Swedish police officers, but it no longer appears to be a health risk. Lead-free communication and well-ventilated indoor firing ranges may have been decisive for this encouraging finding.

Cancer morbidity in workers at aluminum foundries and secondary aluminum smelters.

In a Swedish cohort of workers (n = 6,454) from seven aluminum foundries and three secondary aluminum (scrap) smelters there was no overall excess risk of cancer among male or female workers less than 85 years of age (males: 325 observed cases, standardized incidence ratio (SIR) 1.02, 95% confidence interval (CI) 0.91-1.13; females: 22 cases, SIR = 0.95, 95% CI = 0.60-1.44). In male workers, however, significantly elevated risk estimates were observed for cancer of the lung (51 cases; SIR = 1.49, 95% CI = 1.11-1.96), anorectal cancer (33 cases; SIR 2.13, 95% CI = 1.47-2.99), and sinonasal cancer (4 cases; SIR = 4.70, 95% CI = 1.28-12.01). There was no increase of urinary bladder or liver cancer. Lung cancer risks were highest in workers with a short duration of employment (< 5 years) suggesting determinants of risk related to socioeconomic factors rather than the occupational environment under study, but there were also indications of a lung cancer hazard from sand casting of aluminum for 10 years or more (SIR = 2.10, 95% CI = 1.01-3.87). The increase in anorectal cancer could not be etiologically related to occupational determinants of risk. Sand casting of aluminum aside, the cancer risk in secondary aluminum smelting seems to be lower than in primary aluminum smelting and in iron and steel founding, respectively.

Hexachlorobenzene and octachlorostyrene in plasma of aluminium foundry workers using hexachloroethane for degassing.

OBJECTIVES: To study the load of selected organochlorine compounds in the blood of aluminium foundry workers who use hexachloroethane as a degassing agent for aluminium and to measure some possible effects on internal organs. METHODS: Plasma from nine male aluminium foundry workers with past experience of use of hexachloroethane and 18 controls (two controls per exposed case) matched for residence, sex, age, and socioeconomic status was analysed for hexachlorobenzene (HCB), (P-HCB), and octachlorostyrene (P-OCS) with low resolution gas chromatography-mass spectrometry. Serum samples from the same subjects were analysed for standard kidney, pancreas, and liver function variables. Analysis of variance (ANOVA) with the triplets retained, a non-parametric test, and linear regression were used for the analysis. RESULTS: A fourfold increase of mean P-HCB was found among the exposed subjects compared with the controls (313.1 v 66.9 ng/g lipid; P < 0.01; (ANOVA model)). For P-OCS this difference was even larger (54.6 v 0.7 ng/g lipid; P < 0.01). Results were still significant (P < 0.05) with non-parametric testing. Within the exposed group there was a good correlation between the ln P-HCB (r = 0.80) and ln P-OCS (r = 0.91), respectively, with the cumulative number of years of exposure to hexachloroethane. No significant difference in kidney, pancreas, or liver function was found between the two groups. CONCLUSIONS: Aluminium degassing with hexachloroethane may increase the body burden of selected organochlorine compounds as reflected by HCB and OCS measurements. With the inherent limitations of this investigation no signs of subclinical organ toxicity were found.

Impact of nocturnal bruxism on mercury uptake from dental amalgams.

The mercury (Hg) release from dental amalgam fillings increases by mechanical stimulation. The aim of this study was to investigate the possible impact of nocturnal bruxism on Hg exposure from dental amalgams and to evaluate the effect of an occlusal appliance. 88 female patients from an orofacial pain clinic with a complete maxillary and mandibular dentition, a normal frontal vertical overbite with cuspid guidance, and at least 4 occlusal amalgam fillings in contact with antagonists in intercuspidal position, were examined with the Bruxcore bruxism monitoring device to measure the level of on-going nocturnal bruxism. Based on the degree of abrasion recorded, the subjects were divided into a group defined as bruxists, (n = 29), another group defined as non-bruxists, (n = 32), serving as controls, the intermediate group being discarded. The Hg exposure was assessed from the Hg concentration in plasma and urine, corrected for the creatinine content. In a regression model with bruxism as the only explanatory variable, no significant effect of bruxism was found, but when the number of amalgam fillings, chewing gum use, and other background variables were taken into account, there was a limited impact of bruxism on Hg in plasma. The nocturnal use of an occlusal appliance did not, however, significantly change the Hg levels. This study indicates that mechanical wear on amalgams from nocturnal bruxism may increase the Hg uptake, but the magnitude of this effect seems to be less than from the use of chewing gum.

Three cases of dental technician's pneumoconiosis related to cobalt-chromium-molybdenum dust exposure.

Dental technician's pneumoconiosis (DTP) is a rather recent finding in subjects exposed to the dust generated in dental laboratories producing metal-framed removable partial dentures from alloys based on cobalt, chromium, and molybdenum. This study presents details of the first three Swedish cases of DTP with some emphasis on the diagnostic procedures and the dust exposure. A follow-up of at least 5 years from diagnosis is included.

Variability in the quantification of abrasion on the Bruxcore device.

The rate of abrasion of dental surfaces during short periods of time is difficult to measure clinically, but one quantifiable method is the use of the Bruxcore bruxism monitoring device. The aim of this study was to estimate the interobserver and intraobserver variation in the Bruxcore system using different reading methods. Fifteen volunteers used individually fabricated Bruxcore devices during 4 consecutive nights, and this procedure was repeated after 6 weeks. The abraded areas of the 30 Bruxcore devices were measured by two observers on two occasions and with three methods: microscope without a reference scale; microscope with a reference scale; and a computer-aided system. Intraobserver variation was small (5%), but interobserver variation was statistically significant for all three methods. The computer-aided system was superior to the other two methods. The interaction between Bruxcore values and observers was statistically significant for the microscope methods but not for the computer method. This was a desired property, indicating stability of the computer-aided method over the range of Bruxcore values observed. Small measurement errors, independent of the size of the measurements, can be expected using a trained observer and a computer-aided method for reading the Bruxcore bruxism monitoring device.

Exposure to cobalt chromium dust and lung disorders in dental technicians.

BACKGROUND: Dental technician's pneumoconiosis is a dust-induced fibrotic lung disease of fairly recent origin. This study was carried out to estimate its occurrence in Sweden. METHODS: Thirty seven dental technicians in central and south eastern Sweden with at least five years of exposure to dust from cobalt chromium molybdenum (CoCrMo) alloys, identified by postal survey, agreed to undergo chest radiography and assessment of lung function and exposure to inorganic dust. RESULTS: Six subjects (16%; 95% confidence interval 6% to 23%) showed radiological evidence of dental technician's pneumoconiosis. The lung function of the study group was reduced compared with historical reference material. With local exhaust ventilation dust levels were generally low, whereas in dental laboratories without such equipment high levels of dust, particularly cobalt, were found. CONCLUSIONS: Pneumoconiosis may result from exposure to inorganic dust in the manufacturing of CoCrMo-based dental constructions. It is possible to reduce this hazard substantially by local exhaust ventilation.

Updated and expanded Swedish cohort study on trichloroethylene and cancer risk.

There is limited evidence for mutagenicity and carcinogenicity of trichloroethylene (TRI) in experimental test systems. Whether TRI is a human carcinogen is unclear, however. This paper presents an update and extension of a previously reported cohort of workers exposed to TRI, in total 1670 persons. Among men (n = 1421), the overall standardized mortality ratio (SMR) and cancer morbidity ratio (SIR) were close to the expected, with SMR, 0.97; 95% confidence interval (CI), 0.86 to 1.10; and SIR, 0.96; 95% CI, 0.80 to 1.16, respectively. The cancer mortality was significantly lower than expected (SMR, 0.65; 95% CI, 0.47 to 0.89), whereas an increased mortality from circulatory disorders (cardiovascular, cerebrovascular) was of borderline significance (SMR, 1.17; 95% CI, 1.00 to 1.37). No significant increase of cancer of any specific site was observed, except for a doubled incidence of nonmelanocytic skin cancer without correlation with the exposure categories. In the small female subcohort (n = 249), a nonsignificant increase of cancer and circulatory deaths was observed (SMR, 1.53 and 2.02, respectively). For both genders, however, excess risks were largely confined to groups of workers with lower exposure levels or short duration of exposure or both. It is concluded that this study provides no evidence that TRI is a human carcinogen, ie, when the exposure is as low as for this study population.

Hepatocyte growth factor/scatter factor expression in human mammary epithelium.

This study reports expression of mRNA for the growth modulator hepatocyte growth factor/scatter factor (HGF/SF) in both benign and malignant human mammary epithelium by in situ hybridization. In benign breast tissue expression was prominent in areas of adenosis and in peripheral acinic cells in lactating breast; in malignant epithelium expression was seen in 15 of 21 cases of in situ and invasive breast cancer. In some cases of invasive ductal carcinoma stronger labeling appeared to be associated with areas of tubule formation compared with areas of infiltrating growth, although this was not a universal finding. In contrast, two examples each of in situ comedo carcinoma and invasive lobular carcinoma were completely negative. HGF/SF mRNA extracted from a breast tumor demonstrated the expected 6-kb transcript on Northern blot analysis. These findings suggest the possibility of an autocrine loop for action of HGF/SF in proliferating mammary epithelium.

Down regulation of epidermal growth factor receptors in liver proliferation induced by a mixture of triiodothyronine, amino acids, glucagon, and heparin (TAGH).

This study investigated the mechanisms by which TAGH solution (a mixture of triiodothyronine, amino acids, glucagon, and heparin) induces DNA synthesis in hepatocytes in the liver of intact rats, with particular reference to events at the epidermal growth factor (EGF) receptor. Both partial hepatectomy and infusion of TAGH stimulated DNA synthesis at 24 hours and both procedures resulted in a reduction of EGF receptors assessed in plasma membranes isolated from rat liver at this time. In cell cultures, while EGF strongly stimulated DNA synthesis and started EGF receptor down regulation, TAGH had only a minor effect (1.5 x basal) on DNA synthesis and did not interact with or down regulate the EGF receptor. Membrane phosphorylation studies, however, showed that TAGH induced phosphorylation of tyrosine residues in the EGF receptor. The in vivo action of TAGH seems to entail recruitment of similar changes in the EGF receptor to those that occur after partial hepatectomy.