Magnetic hybrid spheres of glauconite/calcium alginate interface for methylene blue adsorption: Synthesis, characterization, and novel physicochemical insights through theoretical treatment.

Fe3O4 nanoparticles were embedded within a glauconite­calcium alginate (G/CA) matrix to create magnetic hybrid spheres (MNPs-G/CA), with the aim of purifying water from methylene blue (MB) at temperatures of 25, 40, and 50 °C. MNPs-G/CA adsorbent was characterized using numerous techniques, including elemental mapping, zeta potential, FTIR, FESEM, XRD, EDX, and TEM. The greatest amount of the removed MB was achieved under definite conditions of solution pH 8.0, MNPs-G/CA mass (25 mg), interaction time (2 h), and 200 mg/L of MB concentration. The MB uptake process kinetic followed a pseudo-second-order equation (R2 > 0.99) at all tested temperatures. The equilibrium data were fitted to a statistical physics multilayer model in conjunction with the Langmuir and Freundlich equations. The steric n parameter reveals that MNPs-G/CA adsorbent possesses a mixed adsorption orientation (i.e., ranging from 0.69 to 0.93) across various temperatures. The amount of MNPs-G/CA active positions (the NM parameter) was progressively increased from 245 mg/g to 419 mg/g. The measured adsorption capacities (Qsat) ranged from 466.49 to 664.37 mg/g, and the removal of MB molecules was consistent with an endothermic interaction. The interface between the MNPs-G/CA-MB was principally dictated by electrostatic attractions, as evidenced by the values of adsorption energies (∆E), which varied from 16.75 to 21.52 kJ/mol. The regenerated MNPs-G/CA offered over 80 % of its adsorption strength after the fourth adsorption-desorption cycle. This study contributes to our understanding of the physicochemical parameters controlling the MB adsorption mechanism on multifunctional hybrid adsorbents, like the interface between glauconite, alginate, and MNPs.

Effective removal of Cr(VI) and methyl orange by nano magnetite loaded starch/muscovite biocomposite: Characterization, experiments, advanced modeling, and physicochemical parameters interpretation.

Magnetite nanoparticles (MNPs) synthesized from heated basalt were used to support a biocomposite prepared from muscovite (Mus) and carbohydrate polymer starch (St). The developed Mus/St/MNPs composite was characterized by XRD, FTIR, FESEM, TGA, DSC, and Zeta potential techniques. This multifunctional composite showed outstanding adsorption properties for hexavalent chromium (Cr(VI)) and methyl orange (MO) removal at 25-55 °C and pH 3.0. The adsorption isotherms were fitted to Langmuir model for Cr(VI) and Freundlich equation for MO. To understand microscopically these systems and to analyze their adsorption geometry and interactions mechanism, three statistical physics models were utilized. Theoretical calculations indicated that Cr(VI) ions were adsorbed on composite surface presenting a combination of horizontal and vertical positions, while the aggregated MO molecules displayed a non-parallel adsorption orientation and multi-interactions mechanism. The saturation adsorption capacity increased from 243.37 to 371.59 mg/g for Cr(VI) and 409.29 to 457.62 mg/g for MO at 25 and 55 °C (i.e., endothermic interactions). Cr(VI) and MO adsorption on Mus/St/MNPs was controlled by van der Waals forces, hydrogen bonding, and electrostatic interactions where the calculated adsorption energies were 12.5-30.62 kJ/mol. The utilized adsorbent was easily reactivated and reused several times where regenerated Mus/St/MNPs composite showed nearly 79 % of Cr(VI) and 85 % of MO adsorption capacities even after the fourth adsorption-desorption cycle. This study contributes to understand the physicochemical factors of Cr(VI) and MO adsorption on multifunctional adsorbents like MNPs/carbohydrate polymers/aluminosilicates interface.

Experimental and Theoretical Studies of Methyl Orange Uptake by Mn-Rich Synthetic Mica: Insights into Manganese Role in Adsorption and Selectivity.

Manganese-containing mica (Mn-mica) was synthesized at 200 °C/96 h using Mn-carbonate, Al-nitrate, silicic acid, and high KOH concentration under hydrothermal conditions. Mn-mica was characterized and tested as a new adsorbent for the removal of methyl orange (MO) dye from aqueous solutions. Compared to naturally occurring mica, the Mn-mica with manganese in the octahedral sheet resulted in enhanced MO uptake by four times at pH 3.0 and 25 °C. The pseudo-second order equation for kinetics and Freundlich equation for adsorption isotherm fitted well to the experimental data at all adsorption temperatures (i.e., 25, 40 and 55 °C). The decrease of Langmuir uptake capacity from 107.3 to 92.76 mg·g-1 within the temperature range of 25-55 °C suggested that MO adsorption is an exothermic process. The role of manganese in MO selectivity and the adsorption mechanism was analyzed via the physicochemical parameters of a multilayer adsorption model. The aggregated number of MO ions per Mn-mica active site ( n ) was superior to unity at all temperatures signifying a vertical geometry and a mechanism of multi-interactions. The active sites number (DM) of Mn-mica and the total removed MO layers (Nt) slightly changed with temperature. The decrease in the MO adsorption capacities (Qsat = n·DM·Nt) from 190.44 to 140.33 mg·g-1 in the temperature range of 25-55 °C was mainly controlled by the n parameter. The results of adsorption energies revealed that MO uptake was an exothermic (i.e., negative ΔE values) and a physisorption process (ΔE < 40 kJ mol -1). Accordingly, the adsorption of MO onto Mn-mica was governed by the number of active sites and the adsorption energy. This study offers insights into the manganese control of the interactions between MO ions and Mn-mica active sites.

Enhancing adsorption capacity of Egyptian diatomaceous earth by thermo-chemical purification: Methylene blue uptake.

In the current study, calcination and thermo-chemical methods were applied in treatment of the processed diatomite fraction (<45 µm), which containing nearly 82.6 wt.% of the raw Egyptian diatomaceous earth. The untreated and modified diatomite fractions were characterized by optical microscopy (OM), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Thermo-chemical purification produced the highest concentration of diatom frustules (>92% SiO2) without blocking impurities and created SiOSi active sites. These fractions were tested for Methylene blue (MB) adsorption at different pH solutions (2.0-10.0). The purified diatomite via thermo-chemical treatment (PD) gave the greatest adsorption capacity for MB compared to the untreated (UD) and calcinated (CUD) diatomite fractions. Effects of experimental parameters such as MB concentration (60-200 mg L-1), contact time (5-480 min), adsorbent mass (50-250 mg) and temperature (30-55 °C) on MB uptake were investigated. Linear and non-linear forms of Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models indicated that Langmuir model with a maximum adsorption capacity (qmax=105.03mgg-1) fitted well the adsorption data. The chemical nature of MB uptake was revealed by the values of mean free energy E=8.655kJ/moland correlation coefficient of the pseudo-second-order model (R2=0.9997). The calculated thermodynamic parameters (ΔH0, ΔG0 and ΔS0) indicated that the removal of MB is spontaneous and endothermic.