Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 7 de 7
Filter
Add more filters










Database
Language
Publication year range
1.
Materials (Basel) ; 15(12)2022 Jun 20.
Article in English | MEDLINE | ID: mdl-35744408

ABSTRACT

Damage in the Peripheral Nervous System (PNS) is related to numerous neurodegenerative diseases and has consequently drawn the attention of Tissue Engineering (TE), which is considered a promising alternative to already established methods such as surgery and autografts. TE focuses on the design, optimization, and use of scaffolds in vitro and in vivo. In this work, the authors used a novel scaffold geometry fabricated via Multiphoton Lithography (MPL), a commonly used fabrication method, for the mono- and co-cultures of glial Schwann (SW10) and neuronal Neuro-2a (N2a) cells. Both cell types have already been used for the study of various neurodegenerative diseases. However, their focus has been on only one of the cell types at a time, with studies regarding their co-culture only recently documented. Here, the suitability of the fabricated scaffolds has been explored and the effects of topography on SW10 and N2a behavior have been investigated. Our findings demonstrate that scaffold co-culture systems favor the presence of neurites compared to mono-cultures at 21 days (31.4 ± 5.5% and 15.4 ± 5.4%, respectively), while there is also a significant decrease in long neurites in the mono-culture over time (45.3 ± 15.9% at 7 days versus 15.4 ± 5.4% at 21 days). It has been shown that the scaffolds can successfully manipulate cell growth, elongation, and morphology, and these results can form a basis for the development of an experimental model for the study of PNS-related diseases and understanding of key cell functions such as myelination.

2.
Biofabrication ; 9(4): 045004, 2017 Sep 07.
Article in English | MEDLINE | ID: mdl-28837041

ABSTRACT

In this study, we propose a photostructuring approach for protein films based on a treatment with nanosecond pulses of a KrF excimer laser. As a model protein we used an amyloid fibril-forming protein. Laser treatment induced a foaming of the sample surface exhibiting an interconnected fibrous mesh with a high degree of control and precision. The surface foaming was well characterized by scanning electron microscopy, atomic force microscopy, laser induced fluorescence and contact angle measurements. The laser irradiated areas of the protein films acquired new morphological and physicochemical properties that could be exploited to fulfill unmet challenges in the tissue engineering field. In this context we subsequently evaluated the response of NIH/3T3 fibroblast cell line on the processed film. Our results show a strong and statistically significant preference for adhesion and proliferation of cells on the irradiated areas compared to the non-irradiated ones. We propose that this strategy can be followed to induce selective cell patterning on protein films at the microscale.


Subject(s)
Fibroblasts/cytology , Lasers , Proteins/chemistry , Amyloid/chemistry , Animals , Cell Adhesion , Cell Count , Cell Proliferation , Cell Survival , Fibroblasts/metabolism , Fluorescence , Mice , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Microscopy, Fluorescence , NIH 3T3 Cells , Solutions , Surface Properties , Water
3.
Sci Rep ; 7(1): 2100, 2017 05 18.
Article in English | MEDLINE | ID: mdl-28522845

ABSTRACT

The fabrication of nanostructures with controlled assembly and architecture is very important for the development of novel nanomaterial-based devices. We demonstrate that laser techniques coupled with low-temperature hydrothermal growth enable complex three-dimensional ZnO nanorod patterning on various types of substrates and geometries. This methodology is based on a procedure involving the 3D scaffold fabrication using Multi-Photon Lithography of a photosensitive material, followed by Zn seeded Aqueous Chemical Growth of ZnO nanorods. 3D, uniformly aligned ZnO nanorods are produced. The increase in active surface area, up to 4.4 times in the cases presented here, provides a dramatic increase in photocatalytic performance, while other applications are also proposed.

4.
Biointerphases ; 10(2): 021011, 2015 Jun 23.
Article in English | MEDLINE | ID: mdl-26104190

ABSTRACT

The modeling, fabrication, cell loading, and mechanical and in vitro biological testing of biomimetic, interlockable, laser-made, concentric 3D scaffolds are presented. The scaffolds are made by multiphoton polymerization of an organic-inorganic zirconium silicate. Their mechanical properties are theoretically modeled using finite elements analysis and experimentally measured using a Microsquisher(®). They are subsequently loaded with preosteoblastic cells, which remain live after 24 and 72 h. The interlockable scaffolds have maintained their ability to fuse with tissue spheroids. This work represents a novel technological platform, enabling the rapid, laser-based, in situ 3D tissue biofabrication.


Subject(s)
Cells, Immobilized/physiology , Osteoblasts/physiology , Tissue Engineering/methods , Tissue Scaffolds , Animals , Cell Line , Cell Survival , Lasers , Mice , Polymerization , Silicates , Stem Cells/physiology , Zirconium
5.
Opt Express ; 20(4): 3990-6, 2012 Feb 13.
Article in English | MEDLINE | ID: mdl-22418156

ABSTRACT

A new diagnostic approach for assessing the in-depth laser induced modifications upon ultraviolet polymer irradiation is presented. The methodology relies on the observation of morphological alterations in the bulk material (Paraloid B72) by using third harmonic generation. This non destructive methodology allows the detailed and accurate imaging of the structurally laser modified zone extent in the vicinity of the irradiated area. Additionally, for the first time, the visualization and quantitative determination of the contour of the laser-induced swelling/bulk material interface is reported. The observed polymer surface swelling following single-pulse KrF laser irradiation at sub-ablation fluences is interpreted in the context of a model for laser-induced bubble formation due to droplet explosion mechanism.

7.
Acc Chem Res ; 43(6): 771-81, 2010 Jun 15.
Article in English | MEDLINE | ID: mdl-20329718

ABSTRACT

The removal of aged and deteriorated molecular overlayers from the surface of paintings is a delicate and critical intervention in Cultural Heritage (CH) conservation. This irreversible action gets particularly complicated given the multitude of materials that may be present within a painted work of art (often in ultrathin layers or traces), as well as the exceptional sensitivity of the original surfaces to environmental conditions such as heat, light, and so on. Lasers hold an important role among the available cleaning methodologies, as they enable high control and accuracy, material selectivity, and immediate feedback. Still, prior to their implementation, it is imperative to optimize the cleaning parameters, so to ensure that any potential implications to the remaining materials are minimal and well understood. Toward this aim, research at IESL-FORTH is focused on both refining and continuously updating the laser-cleaning protocols (by introducing novel laser technologies into the field, i.e., ultrashort laser pulses), as well as on investigating and studying the nature and extent of laser-induced physicochemical alterations to the involved materials. In this Account, extended work for the understanding of ultraviolet (UV) laser ablation of polymers is presented. Emphasis is placed on the use of model systems (polymers doped with chromophores of known photochemistry) to examine the in-depth laser-induced modifications at the processed surfaces and thus to illustrate the dependence of their nature and extent on laser parameters and material properties. Furthermore, studies for the potential use of femtosecond UV pulses to overcome certain limitations involved with the nanosecond ablation of molecular overlayers from CH surfaces are highlighted. In particular, it is demonstrated that in the femtosecond regime any chemical modifications are, qualitatively and quantitatively, highly defined, limited and nearly independent of the material properties, such as the absorptivity and the degree of polymerization/molecular weight. Thus, they can be highly potent in the treatment of molecular substrates, enabling new material processing schemes that have not been possible with nanosecond laser technology, as for example, processing of ultrathin varnish layers. Finally, a sensitive indicator is introduced to elucidate the extent of any photochemical or structural modification induced at the substrate on the process of the laser-assisted removal of overpaints. A realistic scenario of an overlayered modern painting is simulated by a sensitive polymer film covered with acrylic paint. The indicator is doped with photosensitizers of known photochemistry and strong fluorescence emission, which allow the employment of laser induced fluorescence (LIF) for the detection of any chemical modifications generated into the substrate during laser cleaning. In addition, nonlinear microscopy techniques are successfully employed to examine the extent of these modifications. The suggested methodology is proven to reliably and accurately detect potential changes, and thus, it can serve as a monitoring tool to fine-tune the cleaning protocol and safeguard the original painting.

SELECTION OF CITATIONS
SEARCH DETAIL
...