Identification and quantification of per- and polyfluorinated alkyl substances (PFAS) migrating from food contact materials (FCM).

Per- and polyfluorinated alkyl substances (PFAS) can be added to food contact materials (FCM) to increase their water and/or grease repellent properties. Some well-known PFAS are perfluoroalkyl carboxylic acids (PFCA), perfluoroalkyl sulfonic acids (PFSA), and polyfluorinated telomer alcohols (FTOH). Due to the strength of the carbon-fluorine bond, PFAS are chemically very stable and highly resistant to biological degradation, posing a risk to human health and the environment. To examine the presence of PFAS in paper-based FCM, various samples were collected, including popcorn bags, muffin cups, and pizza boxes with high total organic fluorine (TOF) content from the Danish and Spanish markets. The FCM composition was characterised by FTIR. Quantification of some well-known PFAS such as PFCA, PFSA, and FTOH was performed in food simulants using LC-MS/MS, and in addition a non-targeted screening approach was performed by LC-Orbitrap-HRMS. Among analysed samples, the highest concentrations of PFAS were found in a muffin cup made of cellulose (PFCA âˆ¼ 1.41 µg kg-1 food, FTOH âˆ¼ 11.5 µg kg-1 food), and the results were used to estimate dietary exposures to PFAS migrated from this FCM. Compared to measured TOF value in this sample, the fluorine from all quantified PFAS accounted for only 0.6%. Thus, a more powerful analytical approach was used to further investigate PFAS occurrence in this sample. Using non-targeted screening, an additional twenty compounds were identified, among them five with confidence level 1 and ten with confidence level 2. Many of them were either fluorotelomer carboxylic acids or sulfonic acids or ether-containing compounds.

LDPE and PLA Active Food Packaging Incorporated with Lemon by-Products Extract: Preparation, Characterization and Effectiveness to Delay Lipid Oxidation in Almonds and Beef Meat.

Low-density polyethylene-based packaging with 4% lemon extract (LDPE/4LE) and two polylactic-based (PLA) packaging materials with 4% and 6% lemon extract (PLA/PEG/4LE and PLA/6LE) were produced. O2 and water permeability tests were performed, the total and individual phenolic compounds content were measured, and the films' antioxidant activities were determined. The films' ability to delay lipid oxidation was tested in two model foods: almonds, packaged with LDPE/4LE, PLA/4LE and PLA/6LE for a maximum period of 60 days at 40 °C (accelerated assay); and beef meat, packaged with the PLA/6LE for a maximum period of 11 days at 4 °C. The LE improved the WVP in all of the active films by 33%, 20% and 60% for the LDPE/4LE, PLA/4LE and PLA/6LE films, respectively. At the end of 10 days, the migration of phenolic compounds through the PLA films was measured to be 142.27 and 114.9 µg/dm2 for the PLA/4LE and PLA/6LE films, respectively, and was significantly higher than phenolic compounds migration measured for the LDPE/4LE (15.97 µg/dm2). Naringenin, apigenin, ferulic acid, eriocitrin, hesperidin and 4-hydroxybenzoic acid were the main identified compounds in the PLA, but only 4-hydroxybenzoic acid, naringenin and p-coumaric acid were identified in the LDPE films. Regarding the films' ability to delay lipid oxidation, LDPE/4LE presented the best results, showing a capacity to delay lipid oxidation in almonds for 30 days. When applied to raw beef meat, the PLA/6LE packaging was able to significantly inhibit lipid oxidation for 6 days, and successfully inhibited total microorganisms' growth until the 8th day of storage.

Migration of Dihydroxy Alkylamines and Their Possible Impurities from Packaging into Foods and Food Simulants: Analysis and Safety Evaluation.

Alkyl diethanolamines are a group of compounds commonly used as antistatic agents in plastic food packaging materials. These additives and their possible impurities have the ability to transfer into the food; hence, the consumer may be exposed to these chemicals. Recently, scientific evidence of unknown adverse effects associated with these compounds was reported. N,N-bis(2-hydroxyethyl)alkyl (C8-C18) amines as well as other related compounds and their possible impurities were analyzed in different plastic packaging materials and coffee capsules using target and non-target LC-MS methods. N,N-bis(2-hydroxyethyl)alkyl amines, precisely, C12, C13, C14, C15, C16, C17 and C18, 2-(octadecylamino)ethanol and octadecylamine, among others, were identified in most of the analyzed samples. It should be emphasized that the latter compounds are not listed in the European Regulation 10/2011 and 2-(octadecylamino)ethanol was classified as high toxicity according to Cramer rules. Migration tests were carried out in foods and in the food simulants Tenax and 20% ethanol (v/v). The results showed that stearyldiethanolamine migrated into the tomato, salty biscuits, salad and Tenax. Lastly, as a crucial step in the risk assessment process, the dietary exposure to stearyldiethanolamine transferred from the food packaging into the food was determined. The estimated values ranged from 0.0005 to 0.0026 µg/kg bw/day.

Identification of potential migrants from epoxy and organosol coatings used in metal food cans.

The coatings of metal cans may release complex mixtures of migrants into the contained foods, including non-intentionally added substances (NIAS), such as reaction products. All migrating substances should be studied to demonstrate their safety. In this work, the characterisation of two epoxy and organosol coatings was performed using several techniques. Firstly, the type of coating was identified using FTIR-ATR. Screening techniques based on purge and trap (P&T) and solid-phase microextraction (SPME) coupled to GC-MS were used to investigate volatiles from coatings. For the identification of semi-volatile compounds, an appropriate extraction was performed before analysis by GC-MS. The most abundant substances were compounds with at least one benzene ring and an aldehyde or alcohol group in their structures. Furthermore, a method to quantify some of the identified volatiles was explored. Secondly, HPLC with fluorescence detection (HPLC-FLD) was used to determine non-volatile compounds such as bisphenol analogues and bisphenol A diglycidyl ethers (BADGEs), with subsequent confirmation by LC-MS/MS. Additionally, migration assays were performed by this technique to determine non-volatile compounds migrating into food simulants. Bisphenol A (BPA) and all BADGE derivatives except BADGE.HCl were detected in the migration extracts. Moreover, BADGE-solvent complexes such as BADGE.H2O.BuEtOH, BADGE.2BuEtOH, etc. were also tentatively identified using the accurate mass provided by time-of-flight mass spectrometry (TOF-MS).

Towards the Sustainable Exploitation of Salt-Tolerant Plants: Nutritional Characterisation, Phenolics Composition, and Potential Contaminants Analysis of Salicornia ramosissima and Sarcocornia perennis alpini.

Increasing soil salinisation represents a serious threat to food security, and therefore the exploitation of high-yielding halophytes, such as Salicornia and Sarcocornia, needs to be considered not merely in arid regions but worldwide. In this study, Salicornia ramosissima and Sarcocornia perennis alpini were evaluated for nutrients, bioactive compounds, antioxidant capacity, and contaminants. Both were shown to be nutritionally relevant, exhibiting notable levels of crude fibre and ash, i.e., 11.26-15.34 and 39.46-40.41% dry weight (dw), respectively, and the major minerals were Na, K, and Mg. Total phenolics thereof were 67.05 and 38.20 mg of gallic acid equivalents/g extract dw, respectively, mainly p-coumaric acid and quercetin. Both species displayed antioxidant capacity, but S. ramossima was prominent in both the DPPH and ß-carotene bleaching assays. Aflatoxin B1 was detected in S. ramosissima, at 5.21 µg/Kg dw, which may pose a health threat. The Cd and Pb levels in both were low, but the 0.01 mg/Kg Hg in S. perennis alpini met the maximum legal limit established for marine species including algae. Both species exhibit high potential for use in the agro-food, cosmetics, and pharmaceutical sectors, but specific regulations and careful cultivation strategies need to be implemented, in order to minimise contamination risks by mycotoxins and heavy metals.

Development of a QuEChERS method for simultaneous analysis of 3-Monochloropropane-1,2-diol monoesters and Glycidyl esters in edible oils and margarine by LC-APCI-MS/MS.

A simple, fast and effective direct method based on HPLC-APCI-QqQ-MS/MS has been developed to simultaneously determine four 3-monochloropropane-1,2-diol monoesters (3-MCPDE) esterified with palmitic, linoleic, stearic, and oleic acid, and two glycidyl esters (GE) with palmitic and oleic acid in margarine and olive oil using a QuEChERS approach. Factors affecting the efficiency of the extraction process were assessed, including type and amount of salt, extraction solvent, test portion amount, and clean-up sorbent. The analytical method was validated according to Food and Drug Administration (FDA) guidelines using matrix-matched calibration with internal standards and showed good results in terms of linearity (r2 > 0.9992), accuracy (80

Food and beverage can coatings: A review on chemical analysis, migration, and risk assessment.

The internal surface of food and beverage cans is generally covered with polymeric coatings to preserve food and protect metal substrate from corrosion. Coating materials are complex formulations that contain different starting substances (e.g., monomers, prepolymers, additives, etc.) and in addition during the manufacture of the material several compounds can be formed (e.g., reaction products, degradation products, etc.). These substances have the potential to migrate into the food. Many of them have not been identified and only some have been toxicologically evaluated. This article aims to provide a comprehensive review on the analytical methods used for the identification of potential migrants in can coatings. The migration and exposure to chemicals migrating from can coatings are also reviewed and discussed so far, which is essential for risk assessment. Moreover, a brief section on the current status of the legislation on varnishes and coatings for food contact in Europe is also presented. Liquid chromatography coupled to diode array and fluorescence detectors and particularly to mass spectrometry and gas chromatography-tandem mass spectrometry seem to be the techniques of choice for the identification of potential migrants in can coatings. Some studies have reported migration levels of BPA (bisphenol A) and BADGE (bisphenol A diglycidyl ether) and derivatives exceeding the specific migration limits set in the European legislation. On the whole, low dietary exposure to migrants from can coatings has been reported. However, it is interesting to highlight that in these studies the combined exposure to multiple chemicals has not been considered.

Characterization of Polyester Coatings Intended for Food Contact by Different Analytical Techniques and Migration Testing by LC-MSn.

Polymeric coating formulations may contain different components such as cross-linking agents, resins, lubricants, and solvents, among others. If the reaction process or curing conditions are not applied in a proper way, these components may remain unreacted in the polymeric network and could be released and migrate into foods. In this study, several polyester coatings intended for food contact were investigated. Firstly, Fourier-transform infrared spectroscopy with an attenuated total reflectance (ATR-FTIR) spectrometer and confocal Raman microscopy were used to identify the type of coating. Then, different techniques, including gas chromatography coupled to mass spectrometry (GC-MS) and analysis by matrix-assisted laser desorption coupled to time-of-flight mass spectrometry (MALDI-TOF-MS), among others, were used to investigate the potential volatile and non-volatile migrants. Moreover, migration assays were carried out to evaluate the presence of monomers and to tentatively identify possible oligomers below 1000 Da. The analyses were performed by liquid chromatography coupled to ion trap mass spectrometry (LC-MSn). Using the information collected from each analytical technique, it was possible to elucidate some of the starting substances used in the formulation of the polyester coatings analyzed in this study. In migration tests, several polyester oligomers were tentatively identified for which there is not toxicological data available and, therefore, no migration limits established to date.

Study on the chemical behaviour of Bisphenol S during the in vitro gastrointestinal digestion and its bioaccessibility.

This study evaluated the chemical behaviour of Bisphenol S (BPS) and determined its bioaccessibility after human ingestion using a standardised in vitro gastrointestinal digestion protocol and an analytical method based on high-pressure liquid chromatography coupled with a photodiode array and tandem mass spectrometry. The effects of different factors such as gastric pH, enzymes, and food matrix on the solubility and chemical stability of BPS were studied to evaluate their contribution to its bioaccessibility. The results highlighted that BPS was available at the end of the digestion process in the range of 50-80%, and was susceptible to absorption at the intestinal level. The effect of pH was not significant as a single factor. The presence of enzymes slightly decreased the bioaccessibility of BPS in the intestinal phase with gastric pH increase. Additionally, a soy drink reduced BPS bioaccessibility by up to 5% after oral intake. Finally, a few BPS degradation products were found in non-bioaccessible fractions at different pH values.

Identification of Volatile and Semi-Volatile Compounds in Polymeric Coatings Used in Metal Cans by GC-MS and SPME.

Polymeric coatings are used as a protective layer to preserve food or beverage quality and protect it from corrosion and avoid a metallic taste. These types of materials can contain some chemicals that are susceptible to migrate to food and constitute a risk for consumers' health. This study is focused on the identification of volatile and semi-volatile low molecular weight compounds present in polymeric coatings used for metal food and beverage cans. A method based on solid-liquid extraction followed by gas chromatography-mass spectrometry (GC-MS) was optimized for the semi-volatile compounds. Different solvents were tried with the aim of extracting compounds with different polarities. Furthermore, a method based on solid-phase microextraction (SPME) in headspace (HS) mode and gas chromatography coupled with mass spectrometry (HSSPME-GC-MS) was developed for the identification of potential volatile migrants in polymeric coatings. Some parameters such as extraction time, equilibrium temperature, or the type of fiber were optimized. Different compounds, including aldehydes such as octanal or nonanal, alcohols such as α-terpineol or 2-butoxyethanol, ethers, alkenes, or phthalic compounds, among others, were identified and confirmed with analytical standards both via SPME analysis as well after solvent extraction.

Presence of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in Food Contact Materials (FCM) and Its Migration to Food.

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are synthetic chemical compounds widely used in different industry fields including food contact materials (FCM), providing resistance to fat and humidity, and non-stick properties. PFAS enter into the food chain directly from the intake of contaminated food or indirectly from the migration of the FCM into the food. This exposure published in different research highlights a public health concern. Therefore, it is necessary to perform analysis of the content of different FCM and evaluate the migration from the FCM under normal conditions of use and storage. This bibliographical review proves that different perfluoroalkyl and polyfluoroalkyl compounds are detected in fast food packaging, microwave popcorn bags, and frying pans, among others. Furthermore, it shows the conditions or factors that favor the migration of the PFAS from the FCM into the food.

Industrial Fruits By-Products and Their Antioxidant Profile: Can They Be Exploited for Industrial Food Applications?

Fruit by-products have a low economic value and have proven biological activities, such as antioxidant capacity due to the presence of active compounds. The main objective of this study was to obtain and determine the antioxidant capacity, through DPPH radical assay and ß-carotene bleaching assay, of three food grade extracts from apple, lemon, and orange industrial by-products. Furthermore, the extracts were characterized by ultra-high performance liquid chromatography coupled to mass spectrometry (UHPLC-MS/MS). LC with diode array detector (LC-DAD) was used for the quantification of the main polyphenols. Lemon extract presented the highest inhibition percentage of DPPH radical (51.7%) and the highest total phenolics content (43.4 mg GAE/g) from the by-products studied. Orange by-product was that with the higher number of polyphenols while lemon extract was that with the highest content of individual phenolics. The by-product obtained from the lemon was that with higher amounts of hydroxycinnamic acids (407 µg/g of by-product), mainly chlorogenic acid (386.7 µg/g), followed by the apple by-product (128.0 µg/g of by-product), which showed higher amounts of rosmarinic and chlorogenic acids. These industrial by-products have great potential as a source of natural antioxidants to be used directly as food additives or to be incorporated in packaging to produce active food packaging.

Application of chromatographic analysis for detecting components from polymeric can coatings and further determination in beverage samples.

Major type of internal can coating used for food and beverages is made from epoxy resins, which contain among their components bisphenol A (BPA) or bisphenol A diglycidyl ether (BADGE). These components can be released and contaminate the food or beverage. There is no specific European legislation for coatings, but there is legislation on specific substances setting migration limits. Many investigations have paid attention to BPA due to its classification as endocrine disruptor, however, few studies are available concerning to other bisphenol analogues that have been used in the manufacture of these resins. To evaluate the presence of this family of compounds, ten cans of beverages were taken as study samples. Firstly, the type of coating was verified using an attenuated total reflectance-FTIR spectrometer to check the type of coating presents in most of the samples examined. A screening method was also performed to investigate potential volatiles from polymeric can coatings of beverages using Purge and Trap (P&T) technique coupled to gas chromatography with mass spectrometry detection (GC-MS). Moreover, a selective analytical method based on high performance liquid chromatography with fluorescence detection (HPLC-FLD) for the simultaneous identification and quantification of thirteen compounds including bisphenol analogues (BPA, BPB, BPC, BPE, BPF, BPG) and BADGEs (BADGE, BADGE.H2O, BADGE.2H2O, BADGE.HCl, BADGE.2HCl, BADGE.H2O.HCl, cyclo-di-BADGE) in the polymeric can coatings and in the beverage samples was applied. In addition, a liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) method was optimized for confirmation purposes. The method showed an adequate linearity (R2 >0.9994) and low detection levels down to 5 µg/L. Cyclo-di-BADGE was detected in all extracts of polymeric coatings. The concentrations ranged from 0.004 to 0.60 mg/dm2. No detectable amounts of bisphenol related compounds were found in any of the beverage samples at levels that may pose a risk to human health, suggesting a low intake of bisphenols from beverages.

Dietary Exposure Estimation to Chemicals Transferred from Milk and Dairy Products Packaging Materials in Spanish Child and Adolescent Population.

Packaging materials are subject to risk assessment since they can transfer their components to the food, and they may constitute a risk for the consumers' health. Therefore, estimating the exposure to chemicals migrating from packaging is required. In this study, a novel approach based on a total diet study (TDS)-like investigation to evaluate the exposure to chemicals transferred from the packaging was presented. The proposed methodology involved a non-targeted gas chromatography coupled to mass spectrometry (GC-MS) method to identify potential migrants and the determination of the migrants in composite food samples. The method was applied to evaluate the dietary exposure to chemicals from food packaging materials used for milk and dairy products in the Spanish child and adolescent populations. Several migrants identified in packaging materials were selected to determine their concentration in composite food samples. These chemicals included diethyl phthalate (DEP), diisobutyl phthalate (DIBP), dibutyl phthalate (DBP), bis(2ethylhexyl) phthalate (DEHP), benzophenone (BP), 1,3-diphenylpropane (1,3-DPP), and bis(2-ethylhexyl) terephthalate (DEHT). The method exhibited a good sensitivity (limit of detection, LOD ≤ 0.05 µg/g) and a satisfactory recovery (78.4-124%). Finally, the exposure was estimated using the Spanish national dietary survey ENALIA. Phthalates DBP and DEHP showed the highest mean exposure, ranging from 2.42 (10-17 years)-4.40 (12-35 months) and 1.35 (10-17 years)-4.07 (12-35 months) µg/kg bw/day for DBP and DEHP, respectively.

Estimation of Dietary Exposure to Contaminants Transferred from the Packaging in Fatty Dry Foods Based on Cereals.

Food packaging has received special attention from the food safety standpoint since it could be a potential source of contamination through the migration of chemical substances from the packaging material into food. The assessment of the exposure through the diet to these contaminants from food packaging is necessary. In this work, an estimation of dietary exposure of the young Spanish population (1-17 years) to target chemicals from packaging for fatty dried foods based on cereals was assessed. For this purpose, a gas chromatography coupled to mass spectrometry (GC-MS) method was developed for screening of volatile and semivolatile compounds, potential migrants from the packaging. Then, this technique was used to quantify 8 target analytes, which were previously identified in the packaging (including phthalates, acetyl tributyl citrate (ATBC), butylated hydroxytoluene (BHT) and octocrylene), in composite food samples of fatty cereals prepared according to the consumption data for different age groups. Among the phthalates, exposure to diethyl phthalate (DEP) was the highest for the three groups considered (0.0761-0.545 µg/kg body weight/day), followed by bis(2-ethylhxyl)phathalate (DEHP), while the lowest mean intake was found for di-n-octyl phathalate (DNOP; 0.00463-0.0209 µg/kg body weight/day). The estimated dietary exposures did not exceed for any of the analytes the corresponding established tolerable daily intakes.

GC-MS Screening for the Identification of Potential Migrants Present in Polymeric Coatings of Food Cans.

The coatings used in cans can release complex chemical mixtures into foodstuffs. Therefore, it is important to develop analytical methods for the identification of these potential migrant compounds in packaged food to guarantee the compliance with European food packaging legislation and ensure consumer safety. In the present work, the type of coating in a total of twelve cans collected in Santiago de Compostela (Spain) were evaluated using an ATR (attenuated total reflectance)-FTIR spectrometer. These samples were analysed after extraction with acetonitrile in order to identify potential migrants through a screening method by gas chromatography coupled to mass spectrometry (GC-MS). A total of forty-seven volatile and semi-volatile compounds were identified in these samples, including plasticizers, photoinitiators, antioxidants, lubricants, etc. Then, in a second step, a targeted analysis was carried out for the simultaneous determination of 13 compounds, including bisphenols (BPA, BPB, BPC, BPE, BPF, BPG) and BADGEs (BADGE, BADGE.H2O, BADGE.2H2O, BADGE.HCl, BADGE.2HCl, BADGE.H2O.HCl, cyclo-di-BADGE) by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) with atmospheric pressure chemical ionisation (APCI) source. Among all the bisphenols analysed, only the bisphenol A was detected in four samples; while cyclo-di-BADGE was the predominant compound detected in all the samples analysed.

Migration Studies of Two Common Components of UV-curing Inks into Food Simulants.

The Rapid Alert System for Food and Feed (RASFF) has reported many cases of different UV curing inks components in foodstuffs during the last few years. These contaminants reach foodstuffs mainly by set-off, their principal migration mechanism from the package. Under this premise, this work has tried to characterize the process of migration of two common UV ink components: a photoinitiator (4-Methylbenzophenone) and a coinitiator (Ethyl-4-(dimethylamino) benzoate), from the most common plastic material used in food packaging low-density polyethylene (LDPE) into six different food simulants. The migration kinetics tests were performed at four different common storage temperatures, obtaining the key migration parameters for both molecules: the coefficients of diffusion and partition. The migration process was highly dependent on the storage conditions, the photoinitiator properties and the pH of the foodstuff.

Determination of Xanthohumol in Hops, Food Supplements and Beers by HPLC.

Xanthohumol (XN) is the main prenylated chalcone present in hops (Humulus lupulus) with high biological activity, and it is of great importance for human health because of its antioxidant, anti-inflammatory, immunosuppressive and chemopreventive properties. This polyphenol can be included in the diet through foods in which hops are used, such as beer or food supplements. Because of their health benefits and the increasing interest of using hops as a novel nutraceutical, the aim of this work was the identification and quantification of XN in different types of samples using a method based on high resolution liquid chromatography with a diode array detector (HPLC-DAD). The method was validated in terms of linearity, limits of detection (LOD) and quantification (LOQ), repeatability and recovery. Acceptable linearity (r2 0.9999), adequate recovery (>90% in the most of cases) and good sensitivity (LOD 16 µg/L) were obtained. Furthermore, the presence of XN in all samples was confirmed using liquid chromatography coupled to mass spectrometry (LC-MS/MS) operated in negative ESI (electrospray system ionization) mode. The concentrations of XN determined in hop flowers and food supplements were above the LOQ, in a range between 0.106 and 12.7 mg/g. Beer may also represent an important source of dietary prenylflavonoids, with between 0.028 and 0.062 mg/L of XN. The results showed that the methodology proposed was suitable for the determination of XN in the different types of samples studied, and the amounts of XN varied significantly according to the selected product.

Development and characterization of novel composite glycerol-plasticized films based on sodium caseinate and lipid fraction of tomato pomace by-product.

Tomato processing industries generate many byproducts that are mainly unexploited or underutilized. In order to convert tomato byproducts into added-value products, composite films made of sodium caseinate (NaCas), glycerol (25 wt%), and lipidic fraction of tomato pomace (LFTP) at different contents (0-40 wt%) were produced and characterized in terms of thermal stability, antioxidant activities, mechanical, hydrodynamic and optical properties. Our results showed that increasing LFTP concentration beyond 20 wt% increased the flexibility of NaCas films within the range of 17-25%. Moreover, LFTP incorporation at the highest content improved thermal stability of NaCas films and reduced their water absorption by >72%. Furthermore, increasing LFTP content led to a significant decrease in the light transmission of NaCas/LFTP composite films. Such improvement in functional and physical properties can be attributed not only to the establishment of specific interactions between NaCas and LFTP but also to their good miscibility in the blend along with the homogeneous dispersion of the incorporated LFTP in the polymeric matrix, as confirmed by FTIR and SEM analysis. On the other hand, the antioxidant capacity of NaCas/LFTP composite films was enhanced by increasing LFTP content most likely due to LFTP's high total phenolics content.

Estimates of dietary exposure of Spanish population to packaging contaminants from cereal based foods contained in plastic materials.

Food packaging may be a potential source of contamination, through the migration of chemicals from the packaging into the food, thus food consumption is an important route of human exposure to packaging contaminants. In the present study an approach to estimate the exposure to different chemicals transferred from food packaging was designed. As a first step a GC-MS screening was conducted to identify potential contaminants in the materials. Secondly, different chemicals previously identified in the packaging materials were selected for exposure assessment. The proposed methodology was applied to cereal based foods packed with plastic packaging. A variety of chemicals including e.g. acetyl tributyl citrate (ATBC), bis (2-ethylhexyl) adipate (DEHA) and diethyl phthalate (DEP) among others were identified and analyzed in the foodstuffs. For this purpose a LC-MS/MS method was developed. The selected foodstuffs were pooled into three groups according to the population age (12-35 months, 3-9 years and 10-17 years) and based on the Spanish consumption data (Enalia). In general, ATBC mean exposure was higher than that of phthalates and DEHA for the three groups considered, with mean dietary exposure values ranging from 1.01 µg/kg bw/day (pool 12-35 months) to 2.01 µg/kg bw/day (pool 3-9 years).