Investigation of Thermodynamic, Kinetic, and Isothermal Parameters for the Selective Adsorption of Bisphenol A.

Herein, a novel imprinted solid-phase extraction cartridge was fabricated to investigate the kinetic, thermodynamic, and isothermal parameters for the selective adsorption of Bisphenol A (BPA). The imprinted polymeric cartridges (BMC) for the BPA adsorption were fabricated in the presence of a template and functional monomer using the in situ polymerization technique. To prove the efficiency and selectivity of BMC, the nonimprinted polymeric cartridges (BNC) and the empty polymeric cartridges (EC) were also fabricated with and without functional monomer using the same manner for the preparation of BMC. The characterization of cartridges was performed by elemental analysis, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area measurements, and swelling tests. BPA removal studies were performed by analyzing some parameters such as temperature, BPA concentration, flow rate, salt type, and concentration. The highest capacity was determined as 103.2 mg BPA/g polymer for a 0.75 mL/min flow rate of 0.75 M (NH4)2SO4 containing 200 mg/L BPA solution at 50 °C. NaOH (1.0 M) was used as a desorption agent. The reusability performance was examined by performing 10 consecutive cycles. The solid-phase extraction (SPE) performance was also checked to determine the enrichment and extraction recovery factors for tap water and synthetic wastewater samples. Temkin, Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models were applied to BPA adsorption data examining the adsorption mechanism, surface properties, and adsorption degree. The most suitable isotherm model for BPA adsorption was determined as the Langmuir isotherm model. The thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were investigated to reveal the thermodynamics of adsorption. Adsorption thermodynamic parameters (ΔH°, ΔS°, and ΔG°) were calculated using the thermodynamic equilibrium constant (thermodynamic equilibrium constant, K°) values that change with temperature. It was determined that BPA adsorption was spontaneous (ΔG° < 0) and endothermic (ΔH° > 0) and entropy increased (ΔS° > 0) at the temperatures studied in the BPA adsorption process. The rate control step in the adsorption process was examined by applying pseudo-first-order and pseudo-second-order kinetic models to the adsorption data for the investigations of BPA adsorption kinetics, and the pseudo-second-order kinetic model was found to be more suitable for describing BPA adsorption kinetics. In examining the selectivity of cartridges, structural analogues of hydroquinone, phenol, ß-estradiol, and 8-hydroxyquinoline were tested.

A nitrocellulose paper strip for fluorometric determination of bisphenol A using molecularly imprinted nanoparticles.

The authors describe a test stripe for fluorometric determination of the endocrine disruptor bisphenol A (BPA). Graphene quantum dots (GQDs) were immobilized on molecularly imprinted nanoparticles which then were placed on nitrocellulose paper. The GQDs display blue fluorescence (with excitation/emission peaks at 350/440 nm) which is reduced in the presence of BPA. The test stripe has a 43.9 ± 0.8 µg·L-1 limit of detection in case of water samples. The stripe was applied to the determination of BPA in (spiked) tap water and sea water, and the LODs were found to be 1.8 ± 0.2 µg·L-1 and 4.2 ± 0.5 µg·L-1, respectively. Structural analogs of BPA, such as aminophenol, phenol, hydroquinone and naphthol were found not to interfere. Graphical abstract Schematic presentation of graphene quantum dots immobilized on molecularly imprinted nanoparticles placed on nitrocellulose paper for the determination of Bisphenol A in tap water and seawater. The method is based on the fluorescence quenching due to binding of targets in specific recognition sites.

Synthesis of L-lysine imprinted cryogels for immunoglobulin G adsorption.

L-Lysine imprinted poly(2-hydroxyethyl methacrylate-co-N-methacryloyl-L-aspartic acid) [P(HEMA-co-MAAsp)] cryogels were synthesized and characterized with Fourier transform infrared spectroscopy, scanning electron microscopy, surface area measurements, swelling, and squeezing tests. Specific surface area for imprinted cryogel was 34.2m(2)/g while the value was 21.3m(2)/g for non-imprinted cryogel. IgG adsorption from aqueous solution was examined in continuous mode examining the factors effecting adsorption capacity such as pH, concentration, flow rate, temperature, ionic strength, and incubation time. 0.5M NaCl was used as desorption agent. The IgG adsorption capacity was determined as 55.1 mg/g for 1.0 mg/mL IgG original concentration at 25.0°C while pH and flow rate were 7.0 and 0.5 mL/min, respectively. When human serum was used as IgG source, the removal of 90.4% of crude IgG was attained for 1/20 diluted plasma sample. The imprinted cryogel was used in ten successive cycles without significant loss in adsorption capacity. The cryogel was determined to be 1.79 times more selective to IgG than albumin and 1.45 times more selective than hemoglobin. The adsorption behavior well suited to Langmuir isotherm and the kinetics followed pseudo-second-order model. Thermodynamic parameters ΔH°, ΔS° and ΔG° for this adsorption process were also calculated.

Purification of transferrin by magnetic immunoaffinity beads.

Immunoaffinity adsorbent for transferrin (Tf) purification was prepared by immobilizing anti-transferrin (Anti-Tf) antibody on magnetic monosizepoly(glycidyl methacrylate) beads, which were synthesized by dispersion polymerization technique in the presence of Fe3 O4 nanopowder and obtained with an average size of 2.0 µm. The magnetic poly(glycidyl methacrylate) (mPGMA) beads were characterized by Fourier transform infrared spectroscopy, swelling tests, scanning electron microscopy, electron spin resonance spectroscopy, thermogravimetric analysis and zeta sizing analysis. The density and swelling ratio of the beads were 1.08 g/cm(3) and 52%, respectively. Anti-Tf molecules were covalently coupled through epoxy groups of mPGMA. Optimum binding of anti-Tf was 2.0 mg/g. Optimum Tf binding from aqueous Tf solutions was determined as 1.65 mg/g at pH 6.0 and initial Tf concentration of 1.0 mg/mL. There was no remarkable loss in the Tf adsorption capacity of immunoaffinity beads after five adsorption-desorption cycles. Tf adsorption from artificial plasma was also investigated and the purity of the Tf molecules was shown with gel electrophoresis studies.

Preparation and characterization of thiophilic cryogels with 2-mercapto ethanol as the ligand for IgG purification.

In this study, thiophilic cryogels were prepared by two different approaches and they were used in purification of IgG from aqueous solutions and human plasma. In the first approach, poly(2-hydoxyethyl methacrylate) [PHEMA] cryogel disks were prepared. The PHEMA cryogel disks were activated by divinylsulfone (DVS) and 2-mercapto ethanol was attached. In the second approach, poly(2-hydroxyethyl methacrylate-etylene glycol dimethacrylate) [P(HEMA-EGDMA)] beads were synthesized and 2-mercapto ethanol was attached to the beads as a thiophilic ligand. In order to increase the surface area, P(HEMA-EGDMA)/PHEMA composite cryogel disks were prepared by embedding the P(HEMA-EGDMA) beads into PHEMA cryogels. Both the thiophilic PHEMA (T-PHEMA) cryogel disks and the thiophilic P(HEMA-EGDMA)/PHEMA [T-P(HEMA-EGDMA)/PHEMA] composite cryogel disks were characterized by Fourier transform infrared spectroscopy, surface area measurements, elemental analysis, swelling tests and scanning electron microscopy. The effects of salt concentration, pH, temperature, initial IgG concentration were analysed for IgG adsorption from aqueous solutions in batch mode. When lyotropic salt, Na2SO4, was used, the adsorption capacity was 27.5 mg/g and 68.7 mg/g for T-PHEMA and the T-P(HEMA-EGDMA)/PHEMA composite cryogel disks, respectively. 1.0 M NaCl was used as desorption agent. The change in adsorption capacity was not remarkable for a repetition of adsorption-desorption cycle ten times. Both the thiophilic cryogel disks and the thiophilic composite cryogel disks were also successfully used for IgG isolation from human plasma. The purity assayed by SDS-PAGE was 89%. The adsorption capacities were 74.8 mg/g and 137.4 mg/g in human plasma samples for the T-PHEMA cryogel disks and the T-P(HEMA-EGDMA)/PHEMA composite cryogel disks, respectively.

Chiral recognition of proteins having L-histidine residues on the surface with lanthanide ion complex incorporated-molecularly imprinted fluorescent nanoparticles.

In this study, lanthanide ion complex incorporated molecularly imprinted fluorescent nanoparticles were synthesized. A combination of three novel approaches was applied for the purpose. First, lanthanide ions [Terbium(III)] were complexed with N-methacryloyl-L-histidine (MAH), polymerizable derivative of L-histidine amino acid, in order to incorporate the complex directly into the polymeric backbone. At the second stage, L-histidine molecules imprinted nanoparticles were utilized instead of whole protein imprinting in order to avoid whole drawbacks such as fragility, complexity, denaturation tendency, and conformation dependency. At the third stage following the first two steps mentioned above, imprinted L-histidine was coordinated with cupric ions [Cu(II)] to conduct the study under mild conditions. Then, molecularly imprinted fluorescent nanoparticles synthesized were used for L-histidine adsorption from aqueous solution to optimize conditions for adsorption and fluorimetric detection. Finally, usability of nanoparticles was investigated for chiral biorecognition using stereoisomer, D-histidine, racemic mixture, D,L-histidine, proteins with surface L-histidine residue, lysozyme, cytochrome C, or without ribonuclease A. The results revealed that the proposed polymerization strategy could make significant contribution to the solution of chronic problems of fluorescent component introduction into polymers. Additionally, the fluorescent nanoparticles reported here could be used for selective separation and fluorescent monitoring purposes.

Nanospines incorporation into the structure of the hydrophobic cryogels via novel cryogelation method: an alternative sorbent for plasmid DNA purification.

In this study, it was aimed to prepare hydrophobic cryogels for plasmid DNA (pDNA) purification from Escherichia coli lysate. The hydrophobicity was achieved by incorporating a hydrophobic ligand, N-methacryloyl-(L)-phenylalanine (MAPA), into the cryogel backbone. In addition to the conventional cryogelation process, freeze-drying step was included to create nanospines. Three different cryogels {poly(2-hydoxyethyl methacrylate-N-methacryloyl-L-phenylalanine)-freeze dried, [P(HEMA-MAPA)-FD]; poly(2-hydoxyethyl methacrylate-N-methacryloyl-L-phenylalanine, [P(HEMA-MAPA)] and poly(2-hydoxyethyl methacrylate)-freeze dried, [P(HEMA)-FD]} were prepared, characterized, and used for DNA (salmon sperm DNA) adsorption studies from aqueous solution. The specific surface areas of cryogels were determined to be 21.4 m(2)/g for P(HEMA)-FD, 17.65 m(2)/g for P(HEMA-MAPA) and 36.0 m(2)/g for P(HEMA-MAPA)-FD. The parameters affecting adsorption such as temperature, initial DNA concentration, salt type and concentration were examined in continuous mode. The maximum adsorption capacities were observed as 45.31 mg DNA/g, 27.08 mg DNA/g and 1.81 mg DNA/g for P(HEMA-MAPA)-FD, P(HEMA-MAPA) and P(HEMA)-FD, respectively. Desorption process was performed using acetate buffer (pH 5.50) without salt. First, pDNA was isolated from E. coli lysate and the purity of pDNA was then determined by agarose gel electrophoresis. Finally, the chromatographic performance of P(HEMA-MAPA)-FD cryogel for pDNA purification was tested in FPLC. The resolution (R(s)) was 2.84, and the specific selectivity for pDNA was 237.5-folds greater than all impurities.

Hydroxyl functionalized thermosensitive microgels with quadratic crosslinking density distribution.

N-isopropylacrylamide (NIPA) based uniform thermosensitive microgels were synthesized by dispersion polymerization by using relatively hydrophilic crosslinking agents with hydroxyl functionality. Glycerol dimethacrylate (GDMA), pentaerythritol triacrylate (PETA) and pentaerythritol propoxylate triacrylate (PEPTA) were used as crosslinking agents with different hydrophilicities. A protocol was first proposed to determine the crosslinking density distribution in the thermosensitive microgel particles by confocal laser scanning microscopy (CLSM). The microgels were fluorescently labeled by using hydroxyl group of the crosslinking agent. The CLSM observations performed with the microgels synthesized by three different crosslinking agents showed that the crosslinking density exhibited a quadratic decrease with the increasing radial distance in the spherical microgel particles. This structure led to the formation of more loose gel structure on the particle surface with respect to the center. Then the use of hydrophilic crosslinking agents in the dispersion polymerization of NIPA made possible the synthesis of thermosensitive microgels carrying long, flexible and chemically derivatizable (i.e., hydroxyl functionalized) fringes on the surface by a single-stage dispersion polymerization. The microgels with all crosslinking agents exhibited volume phase transition with the increasing temperature. The microgel obtained by the most hydrophilic crosslinking agent, GDMA exhibited higher hydrodynamic diameters in the fully swollen form at low temperatures than those obtained by PETA and PEPTA. Higher hydrodynamic size decrease from fully swollen form to the fully shrunken form was also observed with the same microgel.

Ion-imprinted beads for molecular recognition based mercury removal from human serum.

The aim of this study is to prepare ion-imprinted polymers which can be used for the selective removal of mercury ions [Hg(2+)] from human serum. N-Methacryloyl-(L)-cysteine (MAC) was chosen as the complexing monomer. In the first step, Hg(2+) was complexed with MAC and the Hg(2+)-imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-(l)-cysteine) (MIP) beads were synthesized by suspension polymerization. After that, the template ions (i.e., Hg(2+)) were removed using thiourea (0.5%, v/v) in 0.05 M HCl. The specific surface area of the MIP beads was found to be 59.04 m(2)/g with a size range of 63-140 micro m in diameter and the swelling ratio was 91.5%. According to the elemental analysis results, the MIP beads contained 87.0 micro mol MAC/g polymer. The maximum adsorption capacity was 0.45 mg Hg(2+)/g beads. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. The relative selectivity coefficients of MIP beads for Hg(2+)/Cd(2+), Hg(2+)/Zn(2+) were 14.7 and 21.5 times greater than the non-imprinted (NIP) matrix, respectively. The MIP beads could be used many times without decreasing in their adsorption capacities significantly.

Removal of phenol and chlorophenols from water with reusable dye-affinity hollow fibers.

Reactive Green HE 4BD carrying polyamide hollow fibers were investigated as dye-affinity adsorbents for removal of chlorophenols (i.e., phenol, o-chlorophenol, p-chlorophenol and 2,4,6-trichlorophenol). Adsorption rates of chlorophenols were very high. Equilibrium was achieved in about 30 min. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity and correlation coefficients. Results suggest that chemisorption process could be the rate-limiting step in the adsorption process. The maximum adsorption values of chlorophenols onto the Reactive Green HE 4BD carrying hollow fibers were 145.9 micromol/g for phenol, 179.2 micromol/g for 2,4,6-trichlorophenol, 194.5 micromol/g for p-chlorophenol and 202.8 micromol/g for o-chlorophenol. The affinity order was as follows: o-chlorophenol>p-chlorophenol>2,4,6-trichlorophenol>phenol. The adsorption capacity of chlorophenols decreased with increasing pH. Desorption of chlorophenols was achieved using methanol solution (30%, v/v). The Reactive Green HE 4BD-carrying hollow fibers are suitable for repeated use for more than 10 cycles without noticeable loss of adsorption capacity.