Epoxy resin bioactive dental implant capped with hydroxyapatite and curcumin nanoparticles: a novel approach.

OBJECTIVE: In this study, the developed bioactive dental implant (BDI) from epoxy resin (ER), hydroxyapatite (HA), and curcumin nanoparticles (CUNPs). MATERIALS AND METHODS: The prepared BDI were characterized using their physicochemical, mechanical, antimicrobial, bioactive, and biocompatibility study. The scanning electron microscopy (SEM) morphology of the BDI was observed HA mineralized crystal layer after being immersed in the stimulated body fluids (SBF) solution. RESULTS: The mechanical properties of the BDI exhibited tensile strength (250.61 ± 0.43 MPa), elongation at break (215.66 ± 0.87%), flexural modulus (03.90 ± 0.12 GPa), water absorption (05.68 ± 0.15%), and water desorption (06.42 ± 0.14%). The antimicrobial activity of BDI was observed in excellent zone of inhibition against the gram-negative (15.33 ± 0.04%) and gram- positive (15.98 ± 0.07%) bacteria. The biocompatibility study of BDI on osteoblasts cell line (MG-63) was analyzed using MTT (3-[4, 5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay. The results were observed 85% viable cells present in the BDI compared to the control (only ER) samples. CONCLUSIONS: Based on the research outcome, the BDI could be used for biomaterials application, particularly tooth dental implantation.

Evaluation of oyster mushroom (Pleurotus ostreatus)-derived anthraquinone on the induction of apoptosis and suppression of MMP-2 and MMP-9 expression in breast cancer cells.

Introduction: Breast cancer results from tissue degradation caused by environmental and genetic factors that affect cells in the body. Matrix metalloproteinases, such as MMP-2 and MMP-9, are considered potential putative markers for tumor diagnosis in clinical validation due to their easy detection in body fluids. In addition, recent reports have suggested multiple roles for MMPs, rather than simply degeneration of the extracellular matrix, which comprises mobilizing growth factors and processing surface molecules. Methods: In this study, the chemotherapeutic effects of anthraquinone (AQ) extracted from edible mushrooms (Pleurotus ostreatus Jacq. ex Fr.) cells was examined in MCF-7 breast cancer cells. The cytotoxic potential and oxidative stress induced by purified anthraquinone were assessed in MCF-7 cells using MTT and ROS estimation assays. Gelatin Zymography, and DNA fragmentation assays were performed to examine MMP expression and apoptotic induction in the MCF-7 cells treated with AQ. The genes crucial for mutations were examined, and the mutated RNA knockout plausibility was analyzed using the CRISPR spcas9 genome editing software. Results: MCF-7 cells were attenuated in a concentration-dependent manner by the administration of AQ purified from P. ostreatus compared with the standard anticancer drug paclitaxel. AQ supplementation decreased oxidative stress and mitochondrial impairment in MCF-7 cells. Treatment with AQ and AQ with paclitaxel consistently decreased the expression of crucial marker genes such as MMP2 and MMP9. The mutated genes MMP2, MMP7, and MMP9 were assessed and observed to reveal four putative gene knockdown potentials for breast cancer treatment. Conclusions: The synergistic application of AQ and paclitaxel exerted a strong inhibitory effect on the MCF-7 breast cancer cells. Extensive studies are imperative to better understand the action of bioactive mixes on the edible oyster fungus P. ostreatus. The gene knockout potential detected by CRISPR SpCas9 will aid in elite research into anticancer treatments.

Silk fibroin sponge impregnated with fish bone collagen: A promising wound healing scaffold and skin tissue regeneration.

In the present study, porous silk fibroin sponges (SFS) were prepared using silk fibroin (SF), fish bone collagen (FBC), and olive oil (OO). The study investigates the potential use of using this sponge as skin tissue regeneration. The sponge was characterized for its physicochemical, mechanical, antimicrobial, and drug release properties. An in vitro study was carried out using human keratinocyte cell line (HaCaT). Biodegradation study using enzymatic method was carried out. The results showed that the mechanical properties such as tensile strength (23.40 ± 0.05 MPa), elongation at break (14.25 ± 0.02%), and water absorption (30.23 ± 0.01%) of the SFS were excellent, indicating promising performance. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays proved the biocompatible nature of the SFS. The SFS exhibited outstanding antibacterial properties against E. coli (4.72 ± 0.05 mm) and S. aureus (4.98 ± 0.07 mm). The developed SFS promote a promising solution for skin tissue regeneration and wound dressing.

Evaluation and In Vitro Study of an Electrospun Bone Tissue Membrane for Bone Regeneration: A Novel Perspective.

Objectives In the present study, electrospun bone tissue membrane (EBTM) was prepared using polyvinylidene fluoride (PVDF), gelatin (gel), and demineralized bone matrix (DBM) by electrospinning method for its potential application in bone tissue regeneration. Materials and methods The prepared EBTM was evaluated using high-resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray spectroscopy (EDX; Silicon Drift 2017, USA), thermogravimetric analysis (TGA), and mechanical properties such as tensile strength (MPa), elongation at break (%), flexibility (%), and water absorption (%). In vitro bioactivity testing of EBTM using simulated body fluid (SBF) was performed after 14 days of immersion. Cell viability was tested using human osteoblast-like cells (MG-63) to prove biocompatibility. Results EBTM had superior surface morphology, thermal stability, and mechanical strength. The mechanical properties of EBTM were promising, enabling its use in tissue engineering. Bioactivity test showed that the EBTM surface developed calcium (Ca) and phosphate (P) after 14 days of being immersed in SBF. Additionally, a biocompatibility investigation revealed that EBTM was covered with more viable cells. Conclusion EBTM with sufficient mechanical strength, thermal stability, surface morphology, Ca deposition, and biocompatibility could serve as a plausible material for bone tissue engineering (skin, ligament, cartilage, and bone).

Bone implant substitutes from synthetic polymer and reduced graphene oxide: Current perspective.

In the present work, bone implant materials (BIM) were produced, in sheet form which comprises epoxy resin (synthetic polymer) (ER), calcium carbonate (CaCO3), and reduced graphene oxide (R-GO), by open mold method, for the possibility uses in bone tissue engineering. The developed BIM was analyzed for its physico-chemical, mechanical, bioactivity test, antimicrobial study, and biocompatibility. The BIM had excellent mechanical properties such as tensile strength (194.44 + 0.21 MPa), flexural strength (278.76 + 0.41 MPa), and water absorption (02.61 + 0.24%). A pore size distribution study using the HR-SEM has proved the 180 and 255 µm average pore was observed in the BIM structure. The Bioactivity test of BIM was examined after being immersed in a simulated body fluids (SBF) solution. The result of BIM formed an excellent deposition of bone tube apatite crystals. High-resolution scanning electron microscopy (HR-SEM) morphology of the bone tube apatite crystals revealed the diameter size in the range from 100 ± 159 to 210 ± 188 nm. BIM has excellent antimicrobial characteristics against E. coli (8.75 + 0.06 mm) and S. aureus (9.82 + 0.08 mm). The biocompatibility of the study MTT (3-(4, 5-dimethyl) thiazol-2-yl-2, 5-dimethyl tetrazolium bromide) assay using the MG-63 (human osteoblast cell line) has proven to be the 78% viable cell presence in BIM. After receiving the necessary approval, the scaffold with the required strength and biocompatibility could be tested as a bone implant material in large animals.

Nano apatite growth on demineralized bone matrix capped with curcumin and silver nanoparticles: Dental implant mechanical stability and optimal cell growth analysis.

OBJECTIVES: The prevention of implant-associated infections is becoming increasingly clinically important in the field of dentistry. Extensive investigations into the development of innovative antibacterial materials that interact effectively to reinforce their functionality are currently being conducted in the biomedical sector. In the present study, a novel dental nano putty (D-nP) has been developed using demineralized bone matrix (DBM), calcium sulfate hemihydrate (CSH), curcumin nanoparticles (CU-NPs), and silver nanoparticles (AgNPs). METHODS: The produced D-nP was evaluated using physicochemical, mechanical, and in vitro analyses. Surface characterization, particularly the analysis of calcium and phosphorus content, was performed before and after immersion in the simulated body fluid (SBF). In addition, the impact of surface treatment on biological activity was studied. RESULTS: The results showed that the mechanical properties of the D-nP were outstanding and its performance is promising. D-nP exhibited excellent antibacterial activity against Actinomyces naeslundii (5.22 ± 0.07 mm) and Streptococcus oralis (5.41 ± 0.1 mm). The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay was conducted using MG-63 osteoblast cells, which exhibited 95 % viability in D-nP. CONCLUSIONS: Based on these characterization results, the D-nP developed in this study exhibited excellent performance for tooth tissue in bone repair.

Cellulose based biopolymer nanoscaffold: A possible biomedical applications.

In this work, a combination of cellulose nanofiber (CNF), coffee beans powder (CBP), and reduced graphene oxide (rGO) are used to design a nanowound dressing sheet (Nano-WDS), by vacuum pressure, for their sustained application in wound healing. Nano-WDS was analysed for its mechanical, antimicrobial, biocompatibility, etc., The Nano-WDS had favourable results of the tensile strength (12.85 ± 0.10 MPa), elongation at break (09.45 ± 0.28 %), water absorption (31.14 ± 0.04 %), and thickness (00.76 ± 0.02 mm). The biocompatibility study of Nano-WDS was analysed using human keratinocyte cell line (HaCaT), which showed excellent cell growth. The antibacterial activity was reflected in the Nano-WDS against the E.coli and S.aureus bacteria. Cellulose comprises the glucose unit and reduced graphene oxides are combined to create macromolecular interaction. The surface activity of cellulose-formed nanowound dressing sheet demonstrates a wound tissue engineering application. Based on the result of the study was proved suitable for bioactive wound dressing applications. The research proves that these Nano-WDS could be successfully used for the production of wound healing materials.

Current Innovations in Intraocular Pressure Monitoring Biosensors for Diagnosis and Treatment of Glaucoma-Novel Strategies and Future Perspectives.

Biosensors are devices that quantify biologically significant information required for diverse applications, such as disease diagnosis, food safety, drug discovery and detection of environmental pollutants. Recent advancements in microfluidics, nanotechnology and electronics have led to the development of novel implantable and wearable biosensors for the expedient monitoring of diseases such as diabetes, glaucoma and cancer. Glaucoma is an ocular disease which ranks as the second leading cause for loss of vision. It is characterized by the increase in intraocular pressure (IOP) in human eyes, which results in irreversible blindness. Currently, the reduction of IOP is the only treatment used to manage glaucoma. However, the success rate of medicines used to treat glaucoma is quite minimal due to their curbed bioavailability and reduced therapeutic efficacy. The drugs must pass through various barriers to reach the intraocular space, which in turn serves as a major challenge in glaucoma treatment. Rapid progress has been observed in nano-drug delivery systems for the early diagnosis and prompt therapy of ocular diseases. This review gives a deep insight into the current advancements in the field of nanotechnology for detecting and treating glaucoma, as well as for the continuous monitoring of IOP. Various nanotechnology-based achievements, such as nanoparticle/nanofiber-based contact lenses and biosensors that can efficiently monitor IOP for the efficient detection of glaucoma, are also discussed.

A review on background, process and application of electrospun nanofibers for tissue regeneration.

Electrospinning is a versatile method which is used to synthesize nano/micro sized fibers under the influence of an electric field. Electrospun nanoscaffolds are one of the widely accepted platforms for cultivating soft and hard tissues as they create a perfect micro-environment for cell adhesion, proliferation and differentiation. Nanoscaffolds are widely used in the field of tissue engineering due to their versatility in aiding the growth of different types of cells and tissues for varied applications. The composition, molecular weight and structure of polymer used to fabricate nanoscaffold plays an important role in determining the size and strength of the nanofibers prepared. This review gives information about the background, process and different types of polymers used in electrospinning. Recent advances in culturing liver cells, osteoblasts, skin cells, neural cells and coronary artery smooth muscle cells on nanoscaffolds are also elucidated.

Sericin/Human Placenta-Derived Extracellular Matrix Scaffolds for Cutaneous Wound Treatment-Preparation, Characterization, In Vitro and In Vivo Analyses.

Human placenta is loaded with an enormous amount of endogenous growth factors, thereby making it a superior biomaterial for tissue regeneration. Sericin is a naturally occurring silk protein that is extensively used for biomedical applications. In the present work, sericin and human placenta-derived extracellular matrix were blended and fabricated in the form of scaffolds using the freeze-drying method for cutaneous wound treatment. The prepared sericin/placenta-derived extracellular matrix (SPEM) scaffolds were characterized to determine their morphology, functional groups, mechanical strength, and antibacterial activity. Scanning electron microscopic analysis of the scaffolds showed smooth surfaces with interconnected pores. In vitro MTT and scratch wound assays performed using HaCaT cells proved the non-toxic and wound-healing efficacy of SPEM scaffolds. In vivo CAM assay using fertilized chick embryos proved the angiogenic potency of the scaffolds. Animal experiments using Wistar albino rats proved that the open excision wounds treated with SPEM scaffolds significantly reduced wound size with collagen deposition. These results confirm that SPEM scaffolds can serve as a promising biomaterial for tissue regeneration.

Collagen/physiologically clotted fibrin-based nanobioscaffold supported with silver nanoparticles: A novel approach.

PURPOSE: In this work, a blend of collagen, physiologically clotted fibrin (PCF), and silver nanoparticles (AgNPs) is used to develop a nanobioscaffold (NBS), for their possible application in wound dressing materials. METHODS: The prepared NBS were evaluated using physicochemical, mechanical, and antibacterial properties. The NBS cell viability was demonstrated in a biocompatibility study using the human keratinocyte cell line (HaCaT). RESULTS: The results demonstrated that the NBS had excellent tensile strength (22.15 ± 0.05 MPa), elongation at break (13.32 ± 0.09%), and water absorption (97.51 ± 0.08). The in-vitro study demonstrated its biocompatible nature. NBS exhibited significant antibacterial activity against the Gram-negative and Gram-positive bacteria. CONCLUSION: The NBS with required mechanical strength, antibacterial activity, and biocompatibility may be tested as a wound material in rats after getting the necessary approval.

Functionalized electrospun nanofibers for high efficiency removal of particulate matter.

In recent years, introducing electrospun airfilters to enhance the removal of PM2.5 and PM10-2.5 has received much interest. In this study, a novel poly-(vinyl) alcohol (PVA)/carbon nanoparticle (CNP)/tea leaf extract (TLE), functionalized nanofibrous air filter (FNA) was fabricated using an electrospinning method. Novelty of the unique work in the blending of CNP and TLE, first of its kind, for the preparation of FNA. Polysaccharide crosslinked FNA has a carbon complex with two monosaccharide units to produce the intrinsic properties of the PM2.5 and PM10-2.5 removal efficiency. The FNA had promising traits of UV protection. The prepared FNA was characterized using physicochemical, mechanical, antimicrobial activity, etc., in addition to its PM2.5 and PM10-2.5 removal efficiency. Pore size and distribution study using the capillary flow porometry method has proved the structure of FNA. FNA exhibited excellent low pressure drop (110 Pa), which are promising characteristics for air purification. FNA from PVA: CNP: TLE exhibited high PM2.5 and PM10-2.5 removal efficiencies of 99.25% and 99.29%, respectively. Hence, the study proved.

Electrospun poly(vinyl) alcohol/collagen nanofibrous scaffold hybridized by graphene oxide for accelerated wound healing.

PURPOSE: In this study, a blend of synthetic polymer (poly(vinyl) alcohol), natural polymer (collagen type I from fish bone), and graphene oxide nanoparticles is used to fabricate a composite nanofibrous scaffold, by electrospinning, for their potential application in accelerated wound healing. METHODS: The scaffold was characterized for its physicochemical and mechanical properties. In vitro studies were carried out using human keratinocyte cell line (HaCaT) which proved the biocompatibility of the scaffold. In vivo study using mice model was carried out and the healing pattern was evaluated using histopathological studies. RESULTS: Scaffold prepared from poly(vinyl) alcohol, collagen type I from fish bone, and graphene oxide possessed better physicochemical and mechanical properties. In addition, in vivo and in vitro studies showed its accelerated wound healing properties. CONCLUSION: The scaffold with required strength and biocompatibility may be tried as a wound dressing material in large animals after getting necessary approval.

Quercetin impregnated chitosan-fibrin composite scaffolds as potential wound dressing materials - Fabrication, characterization and in vivo analysis.

The present study efforts at fabricating chitosan-fibrin composite (CF) scaffolds impregnated with quercetin for wound dressing application and aims at investigating their physicochemical properties. CF scaffolds were prepared by mixing acidic solution of chitosan with an alkaline solution of fibrin, to which quercetin (Q) was added, homogenized and lyophilized obtain Q-CF scaffold. FTIR spectra were used to determine the interactions between the functional groups of quercetin and CF scaffolds. TGA analysis revealed the decomposition of saccharide rings and amino acids of chitosan and fibrin at the temperature range of 255-400°C. Q-CF scaffold exhibited maximum tensile strength of 1.45MPa, an ideal mechanical strength for a wound dressing material. Q-CF scaffolds exhibited good bactericidal activity against Escherichia coli and Staphylococcus aureus. Biocompatibility of Q-CF scaffold was assessed using MTT assay, which elucidated its non-toxic property and excellent suitability for tissue engineering applications. In vivo wound healing experiments performed using albino rats revealed that topical application of Q-CF scaffold on open excision type of wounds can significantly accelerate the process of wound healing. These results suggest that Q-CF scaffold could serve as a promising wound dressing material.

Synthesis and characterization of biosheet impregnated with Macrotyloma uniflorum extract for burn/wound dressings.

Developing biomaterials having wound healing properties within the search of a common man is the need of hour, particularly in developing and third world countries. Keeping this objective in view we have developed a wound dressing material, in sheet form, containing fish scale collagen (FSC) and physiologically clotted fibrin (PCF), both are by products of aqua food and meat industries respectively. To impart antimicrobial properties to the composite sheet, it was incorporated with Macrotyloma uniflorum plant extract (MPE). SEM pictures have shown that FSC:PCF:MPE composite has fibrous and porous surface which helps in transportation of oxygen as well as absorbing wound fluids and their evaporation. The biomaterials have shown 100% biocompatibility and the percentage cell viability was found to be above 89%. The FSC:PCF:MPE biocomposite film with required mechanical strength, biocompatibility and antimicrobial properties can be tried as a burn/wound dressing material.