ABSTRACT
In this study, a semi-active suspension based on a hydro-pneumatic mechanism was designed to minimize the ride vibration using a suspension control algorithm. The performance of the algorithm was critical for controlling the characteristics of the target tractor. A linear-quadratic-Gaussian (LQG) optimal control algorithm was designed as a semi-active suspension control algorithm. The plant model for developing this algorithm was based on the parameters of an actual tractor. The rear suspension deflection was represented by a Kalman-filter-based state observer feedback to estimate the state variables that were difficult to measure. The designed state observer of the LQG controller was validated in terms of an accuracy index. The estimated vertical velocity and acceleration accuracies of the cabin were 83% and 79%, respectively. The performance of the designed controller was validated in terms of a performance index by comparing the performance of a tractor equipped with a rear rubber mount with that of one equipped with a semi-active suspension. The peak and root-mean-square values of the vertical acceleration of the cabin were reduced by up to 48.97% and 47.06%, respectively. This study could serve as a basis for the application of the control algorithm to systems with similar characteristics, thereby reducing system costs.
ABSTRACT
Although the LiDAR sensor provides high-resolution point cloud data, its performance degrades when exposed to dust environments, which may cause a failure in perception for robotics applications. To address this issue, our study designed an intensity-based filter that can remove dust particles from LiDAR data in two steps. In the first step, it identifies potential points that are likely to be dust by using intensity information. The second step involves analyzing the point density around selected points and removing them if they do not meet the threshold criterion. To test the proposed filter, we collected experimental data sets under the existence of dust and manually labeled them. Using these data, the de-dusting performance of the designed filter was evaluated and compared to several types of conventional filters. The proposed filter outperforms the conventional ones in achieving the best performance with the highest F1 score and removing dust without sacrificing the original surrounding data.
ABSTRACT
This paper presents a sliding mode control (SMC)-based path-tracking algorithm for autonomous vehicles by considering model-free adaptive feedback actions. In autonomous vehicles, safe path tracking requires adaptive and robust control algorithms because driving environment and vehicle conditions vary in real time. In this study, the SMC was adopted as a robust control method to adjust the switching gain, taking into account the sliding surface and unknown uncertainty to make the control error zero. The sliding surface can be designed mathematically, but it is difficult to express the unknown uncertainty mathematically. Information of priori bounded uncertainties is needed to obtain closed-loop stability of the control system, and the unknown uncertainty can vary with changes in internal and external factors. In the literature, ongoing efforts have been made to overcome the limitation of losing control stability due to unknown uncertainty. This study proposes an integrated method of adaptive feedback control (AFC) and SMC that can adjust a bounded uncertainty. Some illustrative and representative examples, such as autonomous driving scenarios, are also provided to show the main properties of the designed integrated controller. The examples show superior control performance, and it is expected that the integrated controller could be widely used for the path-tracking algorithms of autonomous vehicles.
ABSTRACT
Excavation is one of the primary projects in the construction industry. Introducing various technologies for full automation of the excavation can be a solution to improve sensing and productivity that are the ongoing issues in this area. This paper covers three aspects of effective excavation progress monitoring that include excavation volume estimation, occlusion area detection, and 5D mapping. The excavation volume estimation component enables estimating the bucket volume and ground excavation volume. To achieve mapping of the hidden or occluded ground areas, integration of proprioceptive and exteroceptive sensing data was adopted. Finally, we proposed the idea of 5D mapping that provides the info of the excavated ground in terms of geometric space and material type/properties using a 3D ground map with LiDAR intensity and a ground resistive index. Through experimental validations with a mini excavator, the accuracy of the two different volume estimation methods was compared. Finally, a reconstructed map for occlusion areas and a 5D map were created using the bucket tip's trajectory and multiple sensory data with convolutional neural network techniques, respectively. The created 5D map would allow for the provision of extended ground information beyond a normal 3D ground map, which is indispensable to progress monitoring and control of autonomous excavation.
