Improvement of Heat Resistance of Fluorosilicone Rubber Employing Vinyl-Functionalized POSS as a Chemical Crosslinking Agent.

Fluorosilicone rubber (F-LSR) is a promising material that can be applied in various cutting-edge industries. However, the slightly lower thermal resistance of F-LSR compared with that of conventional PDMS is difficult to overcome by applying nonreactive conventional fillers that readily agglomerate owing to their incompatible structure. Polyhedral oligomeric silsesquioxane with vinyl groups (POSS-V) is a suitable material that may satisfy this requirement. Herein, F-LSR-POSS was prepared using POSS-V as a chemical crosslinking agent chemically bonded with F-LSR through hydrosilylation. All F-LSR-POSSs were successfully prepared and most of the POSS-Vs were uniformly dispersed in the F-LSR-POSSs, as confirmed by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy (1H-NMR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) measurements. The mechanical strength and crosslinking density of the F-LSR-POSSs were determined using a universal testing machine (UTM) and dynamic mechanical analysis (DMA), respectively. Finally, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) measurements confirmed that the low-temperature thermal properties were maintained, and the heat resistance was significantly improved compared with conventional F-LSR. Eventually, the poor heat resistance of the F-LSR was overcome with three-dimensional high-density crosslinking by introducing POSS-V as a chemical crosslinking agent, thereby expanding the potential fluorosilicone applications.

Effect of the Particle Size and Layer Thickness of GNP Fillers on the Dielectric Properties and Actuated Strain of GNP-PDMS Composites.

Dielectric elastomer actuators (DEAs), a type of electroactive polymers (EAPs), are smart materials that are used in various fields such as artificial muscles and biomimetic robots. In this study, graphene nanoplatelets (GNPs), which are conductive carbon fillers, were added to a widely used DEA, namely, polydimethylsiloxane (PDMS), to improve its low actuated strain. Four grades of GNPs were used: H5, H25, M5, and M25 (here, the number following the letter indicates the average particle size of the GNPs in µm). The average layer thickness of the H grade is 13−14 nm and that of the M grade is 5−7 nm. PDMS composites were prepared by adding 0.5, 1, 2, and 3 wt% of each GNP, following which the mechanical properties, dielectric properties, and actuated strain of the composites were measured. The mechanical properties were found to increase as the particle size increased. Regarding the dielectric characteristics, it was found that the higher the aspect ratio of the filler, the easier the formation of a micro-capacitor network in the composite­this led to an increase in the dielectric constant. In addition, the higher amounts of GNPs in the composites also led to an increase in the dielectric constant. For the actuated strain analysis, the electromechanical sensitivity was calculated using the ratio of the dielectric constant to the Young's modulus, which is proportional to the strain. However, it was found that when the loss tangent was high, the performance of the actuated strain decreased owing to the conversion of electric energy into thermal energy and leakage current loss. As a result, the highest actuated strain was exhibited by the M25 composite, with an actuated strain value of 3.01% measured at a low electric field (<4 kV/mm). In conclusion, we proved that the GNP−PDMS composites with a thin layer and large particle size exhibited high deformation.

Deciphering van der Waals interaction between polypropylene and carbonated fly ash from experimental and molecular simulation.

Pollution emitted from power plants, including a considerable amount of fly ash (FA) and carbon dioxide (CO2), annually increases and is challenging from an environmentally friendly and sustainable point of view. To date, laboratory-scaled approaches cannot efficiently replace the FA-landfilling and mitigate the stress from CO2 emission. Here, a practically operatable fundamental work by combining carbonated FA (C-FA)-immobilizing CO2 in FA-and polypropylene (PP) matrix is reported and reveals abnormal mechanical and thermal features clarified by calculating van der Waals (vdW) interaction from an atomic scale. This is the first study wherein the interaction between instantaneous dipole moment-induced PP and fillers is simulated and examined. The vdW interactions at the (hetero)interfaces are -59.66, -82.30, and -224.39 kJ mol-1 Å-2 for PP, calcium oxide (CaO; before carbonation), and calcium carbonate (CaCO3; after carbonation), respectively, which provides concrete theoretical support for interesting findings such as the independence of tensile strength on filler loadings and "well-grown" interface-induced higher conductivity characteristics of the composites. Therefore, this work can offer practical solutions to mitigate pollution, provide a new perspective on fundamental physical interactions, and guide the development of practical next-generation composite materials.

Development and apoptosis of pre-implantation porcine nuclear transfer embryos activated with different combination of chemicals.

Artificial activation of oocytes is a pre-requisite for successful cloning by nuclear transfer (NT). This study investigated effect of different combination of activation chemicals such as electric pulse (E), thimerosal (Thi) + dithiothreitol (DTT), 6-dimethylaminopurine (6-DMAP), or cycloheximide (CH) on the developmental ability and the frequency of apoptosis of porcine NT embryos during the culture in vitro. NT embryos activated with chemicals showed significantly higher developmental rate to blastocyst stage compared to embryos activated with E alone (21.5%-26.6% vs. 15.7%, respectively). Of chemicals, Thi + DTT supported higher development to blastocyst stage as compared to 6-DMAP or CH (26.6% vs. 21.5%-23.4%, respectively). Apoptosis of NT embryos were analyzed by using a terminal deoxynucleatidyl transferase-mediated deoxyuridine 5-triphosphate nick-end labeling (TUNEL) assay. The onset of apoptosis of embryos activated E alone was on Day 4, whereas embryos activated with chemicals showed apoptosis on Day 3 post-activation NT embryos exposed to chemicals for activation had higher frequency of apoptosis compared to that of embryos exposed to E alone from Day 3 to Day 7 during the culture. In conclusion, this study shows that chemical activation after fusion could increase not only the developmental ability of porcine NT embryos but also the mean cell number with an increased ratio of inner cell mass (ICM) to trophectoderm (TE) cells. However, the chemical activation also could increase the frequency of apoptosis and induced apoptosis earlier in porcine NT embryos.