Production of biochar from crop residues and its application for biofuel production processes - An overview.

A sustainable carbon-neutral society is imperative for future generations, and biochars and biofuels are inevitable choice to achieve this goal. Crop residues (CR) such as sugarcane bagasse, corn stover, and rice husk are promising sustainable resources as a feedstock for biochars and biofuels. Extensive research has been conducted on CR-based biochar production not only in environmental remediation areas but also in application for biofuel production. Here, the distribution and resource potential of major crop residues are presented. The production of CR-biochar and its applications in biofuel production processes, focusing on the latest research are discussed. Finally, the challenges and areas of opportunity for future research in terms of CR supply, CR-biochar production, and CR-biochar utilization for biofuel production are proposed. Compared with other literature reviews, this study can serve as a guide for the establishment of sustainable, economical, commercial CR-based biorefineries.

CuY zeolite catalysts prepared by ultrasonication-assisted ion-exchange for oxidative carbonylation of methanol to dimethyl carbonate.

The influence of ultrasonication treatment on the catalytic performance of CuY zeolite catalysts was investigated for the liquid-phase oxidative carbonylation of methanol to dimethyl carbonate (DMC). The deammoniation method of NH4Y into HY zeolites was optimized and characterized by elemental analyzer, derivative thermogravimetry, Brunauer-Emmett-Teller (BET) analyzer, and powder X-ray diffractometry, revealing that the HY zeolite deammoniated at 400 °C presented the highest surface area, complete ammonium/proton ion exchange, and no structure collapse, rendering it the best support from all the prepared zeolites. CuY zeolites were prepared via aqueous phase ion exchange with the aid of ultrasonication. Upon ultrasonication, the Cu+ active centers were uniformly dispersed in the Y zeolites, penetrating the core of the zeolite particles in a very short time. In addition to enhancing the Cu dispersity, the ultrasonication treatment influenced the BET surface area, acid amount, Cu+/Cu2+ ratio, and also had a relatively small impact on the Cu loading. Consequently, adequate exposure to ultrasonication was able to increase the conversion rate of methanol into dimethyl carbonate up to 11.4% with a comparable DMC selectivity of 23.7%. This methanol conversion is 2.65 times higher than that obtained without the ultrasonication treatment.

Magnetic-Nanoflocculant-Assisted Water-Nonpolar Solvent Interface Sieve for Microalgae Harvesting.

Exploitation of magnetic flocculants is regarded as a very promising energy-saving approach to microalgae harvesting. However, its practical applicability remains limited, mainly because of the problem of the postharvest separation of magnetic flocculants from microalgal flocs, which is crucial both for magnetic-flocculant recycling and high-purity microalgal biomasses, but which is also a very challenging and energy-consuming step. In the present study, we designed magnetic nanoflocculants dually functionalizable by two different organosilane compounds, (3-aminopropyl)triethoxysilane (APTES) and octyltriethoxysilane (OTES), which flocculate negatively charged microalgae and are readily detachable at the water-nonpolar organic solvent (NOS) interface only by application of an external magnetic field. APTES functionalization imparts a positive zeta potential charge (29.6 mV) to magnetic nanoflocculants, thereby enabling microalgae flocculation with 98.5% harvesting efficiency (with a dosage of 1.6 g of dMNF/g of cells). OTES functionalization imparts lipophilicity to magnetic nanoflocculants to make them compatible with NOS, thus effecting efficient separation of magnetic flocculants passing through the water-NOS interface sieve from hydrophilic microalgae. Our new energy-saving approach to microalgae harvesting concentrates microalgal cultures (∼1.5 g/L) up to 60 g/L, which can be directly connected to the following process of NOS-assisted wet lipid extraction or biodiesel production, and therefore provides, by simplifying multiple downstream processes, a great potential cost reduction in microalgae-based biorefinement.

Long-term sustainable aluminum precursor solution for highly conductive thin films on rigid and flexible substrates.

To fabricate the highly conductive Al film via a solution process, AlH3 etherates have been a unique Al source despite their chemical instability in solvents and thus lack of long-term sustainability. Herein, we suggest an innovative solution process to overcome the aforementioned drawbacks in AlH3 etherates; AlH3 aminates powder, which can be stored in low temperature surroundings and redissolved in solvents whenever it is needed. Since refrigeration of AlH3 aminates, AlH3{N(CH3)3}, was very effective to prevent its chemical degradation, Al film with excellence and uniformity in electrical and mechanical properties was successfully fabricated even by the 180-day stored AlH3{N(CH3)3} dissolved in solvents. Moreover, the applicability of long-term stored AlH3{N(CH3)3} to electronic devices was experimentally demonstrated by the successful operation of LED lamps connected to the Al pattern films on glass, PET, and paper substrates.

Repeated use of stable magnetic flocculant for efficient harvest of oleaginous Chlorella sp.

In the present study, a simple magnetic-particle recycling strategy was developed for harvest of the oleaginous microalga Chlorella sp. KR-1. The method entails the flocculation of microalgal cells and bare-Fe3O4 magnetic particles (bMP) by electrostatic attraction and the subsequent recovery of the bMP from the harvested flocs by electrostatic repulsion below and above the isoelectric points (IEP), respectively. For 10 recycles, the bMP showed 94-99% and 90-97% harvest and recovery efficiencies, respectively. Furthermore, neither the use of bMP nor pH adjustment showed any adverse effect on the microalgal cell growth or the co-existing bacterial species, as confirmed from the subsequent medium-recycling test and denaturing gradient gel electrophoresis (DGGE) analysis.

Magnetoresponsive discoidal photonic crystals toward active color pigments.

Photonic microdisks with a multilayered structure are designed from photocurable suspensions by step-by-step photolithography. In each step of photolithography, either a colloidal photonic crystal or a magnetic-particle-laden layer is stacked over the windows of a photomask. Sequential photolithography enables the creation of multilayered photonic microdisks that have brilliant structural colors that can be switched by an external magnetic field.

Effect of barium ferrite particle size on detachment efficiency in magnetophoretic harvesting of oleaginous Chlorella sp.

Microalgal biofuel is garnering many positive and promising reviews as a fuel for the next generation while research effort continues to improve the efficiency of its harvesting for commercial success. In this report, magnetophoretic harvesting of microalgae is conducted through a three-step process, which includes functionalization of magnetic particles by (3-aminopropyl)triethoxysilane (APTES), magnetic separation, and detachment of magnetic particles by increasing pH to higher than the isoelectric point. Detachment process is specifically focused and found that the use of larger magnetic particles is more efficient for detachment of magnetic particles from algae-particle conglomerates. The detaching efficiency improves from 12.5% to 85% when the particle size is increased from 108 nm to 1.17 µm. Smaller magnetic particles provide larger contact area to microalgae and form strong electrostatic binding to negatively-charged microalgae when pH is lower than the isoelectric point.

3D printing of interdigitated Li-ion microbattery architectures.

3D interdigitated microbattery architectures (3D-IMA) are fabricated by printing concentrated lithium oxide-based inks. The microbatteries are composed of interdigitated, high-aspect ratio cathode and anode structures. Our 3D-IMA, which exhibit high areal energy and power densities, may find potential application in autonomously powered microdevices.