High-Field Electron Transport and High Saturation Velocity in Multilayer Indium Selenide Transistors.

Creating a high-frequency electron system demands a high saturation velocity (υsat). Herein, we report the high-field transport properties of multilayer van der Waals (vdW) indium selenide (InSe). The InSe is on a hexagonal boron nitride substrate and encapsulated by a thin, noncontinuous In layer, resulting in an impressive electron mobility reaching 2600 cm2/(V s) at room temperature. The high-mobility InSe achieves υsat exceeding 2 × 107 cm/s, which is superior to those of other gapped vdW semiconductors, and exhibits a 50-60% improvement in υsat when cooled to 80 K. The temperature dependence of υsat suggests an optical phonon energy (ℏωop) for InSe in the range of 23-27 meV, previously reported values for InSe. It is also notable that the measured υsat values exceed what is expected according to the optical phonon emission model due to weak electron-phonon scattering. The superior υsat of our InSe, despite its relatively small ℏωop, reveals its potential for high-frequency electronics, including applications to control cryogenic quantum computers in close proximity.

Drain-Induced Multifunctional Ambipolar Electronics Based on Junctionless MoS2.

Applying a drain bias to a strongly gate-coupled semiconductor influences the carrier density of the channel. However, practical applications of this drain-bias-induced effect in the advancement of switching electronics have remained elusive due to the limited capabilities of its current modulation known to date. Here, we show strategies to largely control the current by utilizing drain-bias-induced carrier type switching in an ambipolar molybdenum disulfide (MoS2) field-effect transistor with Pt bottom contacts. Our CMOS-compatible device architecture, incorporating a partially gate-coupled p-n junction, achieves multifunctionality. The ambipolar MoS2 device operates as an ambipolar transistor (on/off ratios exceeding 107 for both NMOS and PMOS), a rectifier (rectification ratio of ∼3 × 106), a reversible negative breakdown diode with an adjustable breakdown voltage (on/off ratio exceeding 109 with a maximum current as high as 10-4 A), and a photodetector. Finally, we demonstrate a complementary inverter (gain of ∼24 at Vdd = 1.5 V), which is highly facile to fabricate without the need for complex heterostructures and doping processes. Our study provides strategies to achieve high-performance ambipolar MoS2 devices and to effectively utilize drain bias for electrical switching.

Zero power infrared sensing in 2D/3D-assembled heterogeneous graphene/In/InSe/Au.

Low- or self-powered infrared sensors can be used in a broad range of applications, including networking mobile edge devices and image recognition for autonomous driving technology. Here, we show state-of-the-art self-powered near-infrared (NIR) sensors using graphene/In/InSe/Au as a photoactive region. The self-powered NIR sensors show outstanding performance, achieving a photoresponsivity of ∼8.5 A W-1 and a detectivity of ∼1012 Jones at 850 nm light. Multiple self-powered InSe photodetectors with different device structures and contacts were systematically investigated. In particular, the asymmetrically assembled graphene/In/InSe/Au vertical heterostructure offers a high built-in field, which gives rise to efficient electron-hole pair separation and transit time that is shorter than the photocarrier lifetime. The built-in potential across the InSe was estimated using the Schottky barrier height at each metal contact with InSe, obtained using density functional theory calculations. We also demonstrate InSe vertical field-effect transistors and provide an out-of-plane carrier mobility of InSe. Using the out-of-plane mobility and structural parameters of each device, the built-in field, drift velocity, and corresponding transit time are estimated.