ABSTRACT
This paper describes the results obtained on the preparation of films composed of linter cellulose and the corresponding acetates. The acetylation was carried out in the LiCl/DMAc solvent system. Films were prepared from a LiCl/DMAc solution of cellulose acetates (degree of substitution, DS 0.8-2.9) mixed with linter cellulose (5, 10 and 15 wt %). Detailed characterization of the films revealed the following: (i) they exhibited fibrous structures on their surfaces. The strong tendency of the linter cellulose chains to aggregate in LiCl/DMAc suggests that these fibrous elements consist of cellulose chains, as can be deduced from SEM images of the film of cellulose proper; (ii) the cellulose acetate films obtained from samples with DS 2.1 and 2.9 exhibited microspheres on the surface, whose formation seems to be favored for acetates with higher DS; (iii) AFM analysis showed that, in general, the presence of cellulose increased both the asperity thickness and the surface roughness of the analyzed films, indicating that cellulose chains are at least partially organized in domains and not molecularly dispersed between acetate chains; and (iv) the films prepared from cellulose and acetates exhibited lower hygroscopicity than the acetate films, also suggesting that the cellulose chains are organized into domains, probably due to strong intermolecular interactions. The linter and sisal acetates (the latter from a prior study), and their respective films, were prepared using the same processes; however, the two sets of films presented more differences (as in humidity absorption, optical, and tensile properties) than similarities (as in some morphological aspects), most likely due to the different properties of the starting materials. Potential applications of the films prepared in tissue engineering scaffold coatings and/or drug delivery are mentioned.
ABSTRACT
The thermo-solvatochromic behaviors of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl) phenolate, RB; 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl) phenolate, WB; 2,6-dibromo-4-[( E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePMBr 2; 2,6-dibromo-4-[( E)-2-(1-n-octylpyridinium-4-yl)ethenyl] phenolate, OcPMBr 2, have been investigated in binary mixtures of the ionic liquid, IL, 1-(1-butyl)-3-methylimidazolium tetrafluorborate, [BuMeIm][BF 4], and water (W), in the temperature range from 10 to 60 degrees C. Plots of the empirical solvent polarities, E T (probe) in kcal mol (-1), versus the mole fraction of water in the binary mixture, chi w, showed nonlinear, i.e., nonideal behavior. Solvation by these IL-W mixtures shows the following similarities to that by aqueous aliphatic alcohols: The same solvation model can be conveniently employed to treat the data obtained; it is based on the presence in the system-bulk medium and probe solvation shell of IL, W, and the "complex" solvent 1:1 IL-W. The origin of the nonideal solvation behavior appears to be the same, preferential solvation of the probe, in particular by the complex solvent. The strength of association of the IL-W complex, and the polarity of the IL are situated between the corresponding values of aqueous methanol and aqueous ethanol. Temperature increase causes a gradual desolvation of all probes employed. A difference between solvation by IL-W and aqueous alcohols is that probe-solvent hydrophobic interactions appear to play a minor role in case of the former mixture, probably because solvation is dominated by hydrogen-bonding and Coulombic interactions between the ions of the IL and the zwitterionic probes.
ABSTRACT
The following novel solvatochromic probes were synthesized: 2,6-dibromo-4-[(E)-2-(1-alkylpyridinium-4-yl)ethenyl] phenolate, where the alkyl groups are methyl, n-butyl, n-hexyl, and n-octyl, respectively. Solvatochromism of three of these probes (C(1), C(4), and C(8)) was studied in 36 protic and aprotic solvents. A modified linear solvation energy relationship has been applied to the data obtained at 25 degrees C. Correlation of (empirical) polarities with other solvent properties showed more dependence on lipophilicity than on basicity. A similar conclusion has been reached for a series of other solvatochromic indicators. Exceptions are those that carry acidic hydrogens, being biased toward solvent basicity. Thermosolvatochromism has been studied in mixtures of water with methanol, 1-propanol, acetonitrile, and DMSO. Thermosolvatochromic data have been treated according to a model that explicitly considers the presence in bulk solution of three "species": water, organic component, and solvent-water hydrogen-bonded aggregate. Solvation by the latter is favored over solvation by either of the two precursor solvents (aqueous DMSO is an exception). Temperature increase resulted in desolvation of the probes, due to concomitant decrease of the structures of the component solvents. The above-mentioned modified solvation equation has been successfully applied to solvatochromism in aqueous methanol and aqueous 1-propanol.
