A Unique Mechanochemical Redox Reaction Yielding Nanostructured Double Perovskite Sr2FeMoO6 With an Extraordinarily High Degree of Anti-Site Disorder.

Strontium ferromolybdate, Sr2FeMoO6, is an important member of the family of double perovskites with the possible technological applications in the field of spintronics and solid oxide fuel cells. Its preparation via a multi-step ceramic route or various wet chemistry-based routes is notoriously difficult. The present work demonstrates that Sr2FeMoO6 can be mechanosynthesized at ambient temperature in air directly from its precursors (SrO, α-Fe, MoO3) in the form of nanostructured powders, without the need for solvents and/or calcination under controlled oxygen fugacity. The mechanically induced evolution of the Sr2FeMoO6 phase and the far-from-equilibrium structural state of the reaction product are systematically monitored with XRD and a variety of spectroscopic techniques including Raman spectroscopy, 57Fe Mössbauer spectroscopy, and X-ray photoelectron spectroscopy. The unique extensive oxidation of iron species (Fe0 → Fe3+) with simultaneous reduction of Mo cations (Mo6+ → Mo5+), occuring during the mechanosynthesis of Sr2FeMoO6, is attributed to the mechanically triggered formation of tiny metallic iron nanoparticles in superparamagnetic state with a large reaction surface and a high oxidation affinity, whose steady presence in the reaction mixture of the milled educts initiates/promotes the swift redox reaction. High-resolution transmission electron microscopy observations reveal that the mechanosynthesized Sr2FeMoO6, even after its moderate thermal treatment at 923 K for 30 min in air, exhibits the nanostructured nature with the average particle size of 21(4) nm. At the short-range scale, the nanostructure of the as-prepared Sr2FeMoO6 is characterized by both, the strongly distorted geometry of the constituent FeO6 octahedra and the extraordinarily high degree of anti-site disorder. The degree of anti-site disorder ASD = 0.5, derived independently from the present experimental XRD, Mössbauer, and SQUID magnetization data, corresponds to the completely random distribution of Fe3+ and Mo5+ cations over the sites of octahedral coordination provided by the double perovskite structure. Moreover, the fully anti-site disordered Sr2FeMoO6 nanoparticles exhibit superparamagnetism with the blocking temperature T B = 240 K and the deteriorated effective magnetic moment µ = 0.055 µ B per formula unit.

Structural and Mechanical Changes of AlMgSi0.5 Alloy during Extrusion by ECAP Method.

SPD (several plastic deformations) methods make it possible to obtain an ultrafine-grained structure (UFG) in larger volumes of material and thus improve its mechanical properties. The presented work focuses on the structural and mechanical changes of aluminium alloy AlMgSi0.5 (EN AW 6060) during processing by repeated extrusion through the ECAP rectangular channel. After a four-pass extrusion, the samples' microstructures were observed using an optical microscope, where refinement of the material grains was confirmed. Tensile tests determined the extrusion forces and allowed interpretation of the changes in the mechanical properties of the stressed alloy. The grain size was refined from 28.90 µm to 4.63 µm. A significant improvement in the strength of the material (by 45%) and a significant deterioration in ductility (to 60%) immediately after the first extrusion was confirmed. The third pass through the die appeared to be optimal for the chosen deformation path, while after the fourth pass, micro-cracks appeared, significantly reducing the strength of the material. Based on the measurement results, new analytical equations were formulated to predict the magnitude or intensity of the volumetric and shape deformations of the structural grain size and, in particular, the adequate increase in the strength and yield point of the material.

X-ray diffraction and thermoanalytical datasets of precursors of the Gd6UO12-δ phase processed by combined mechanochemical-thermal routes.

The datasets presented here are related to the research paper entitled "Disordered Gd6UO12-δ with the cation antisite defects prepared by a combined mechanochemical-thermal method"[1]. The datasets complement the findings [1] on the effect of the combined mechanochemical-thermal processing of the stoichiometric mixture of solid precursors (3Gd2O3 + UO2) on the formation of Gd6UO12-δ phase. In this article, we provide (i) X-ray diffraction (XRD) data of the 3Gd2O3 + UO2 mixture milled for 12 h, (ii) the refined XRD data of the non-milled 3Gd2O3 + UO2 mixture after annealing at 1282 °C for 3 h in air, and (iii) the thermogravimetric and differential thermal analysis (TG-DTA) data for non-milled and mechanically preactivated 3Gd2O3 + UO2 mixture measured in air at a heat rate of 10 K/min.

Evidence of Tetrahedrally Coordinated Nickel Cations in Nanostructured NiFe2O4.

Nanostructured nickel ferrite (NiFe2O4) is prepared via high-energy ball milling of the bulk counterpart at ambient temperature. The structure of the as-prepared nanoferrite is characterized by Raman spectroscopy and 57Fe Mössbauer spectroscopy. Due to the ability of these spectroscopic techniques to probe the local environment of ions, valuable complementary insight into the nature of the local structural disorder of nanosized NiFe2O4 is provided. For the first time, evidence is given of the tetrahedrally coordinated nickel cations in the nanomaterial.

Mechanochemically Synthesised Coal-Based Magnetic Carbon Composites for Removing As(V) and Cd(II) from Aqueous Solutions.

The continued decrease in water quality requires new advances in the treatment of wastewater, including the preparation of novel, effective, environmentally friendly, and affordable sorbents of toxic pollutants. We introduce a simple non-conventional mechanochemical synthesis of magnetically responsive materials. Magnetic lignite and magnetic char were prepared by high-energy ball co-milling from either raw Slovak lignite or coal-based char together with a ferrofluid. The products were characterised by X-ray diffraction, electron microscopy, 57Fe Mössbauer spectroscopy, X-ray photoelectron spectroscopy (XPS), volumetric magnetic susceptibility, and low-temperature nitrogen adsorption, and both magnetic carbons were comparatively tested as potential sorbents of As(V) oxyanions and Cd(II) cations in aqueous solutions. The magnetic char was an excellent sorbent of As(V) oxyanions (Qm = 19.9 mg/g at pH 3.9), whereas the magnetic lignite was less effective. The different sorption properties towards arsenic anions may have been due to different oxidation states of iron on the surfaces of the two magnetic composites (determined by XPS), although the overall state of iron monitored by Mössbauer spectroscopy was similar for both samples. Both magnetic composites were effective sorbents for removing Cd(II) cations (Qm (magnetic lignite) = 70.4 mg/g at pH 6.5; Qm (magnetic char) = 58.8 mg/g at pH 6.8).

Identification of Upper and Lower Level Yield Strength in Materials.

This work evaluates the possibility of identifying mechanical parameters, especially upper and lower yield points, by the analytical processing of specific elements of the topography of surfaces generated with abrasive waterjet technology. We developed a new system of equations, which are connected with each other in such a way that the result of a calculation is a comprehensive mathematical-physical model, which describes numerically as well as graphically the deformation process of material cutting using an abrasive waterjet. The results of our model have been successfully checked against those obtained by means of a tensile test. The main prospect for future applications of the method presented in this article concerns the identification of mechanical parameters associated with the prediction of material behavior. The findings of this study can contribute to a more detailed understanding of the relationships: material properties-tool properties-deformation properties.

Quantifying the Mechanical Properties of Materials and the Process of Elastic-Plastic Deformation under External Stress on Material.

The paper solves the problem of the nonexistence of a new method for calculation of dynamics of stress-deformation states of deformation tool-material systems including the construction of stress-strain diagrams. The presented solution focuses on explaining the mechanical behavior of materials after cutting by abrasive waterjet technology (AWJ), especially from the point of view of generated surface topography. AWJ is a flexible tool accurately responding to the mechanical resistance of the material according to the accurately determined shape and roughness of machined surfaces. From the surface topography, it is possible to resolve the transition from ideally elastic to quasi-elastic and plastic stress-strain states. For detecting the surface structure, an optical profilometer was used. Based on the analysis of experimental measurements and the results of analytical studies, a mathematical-physical model was created and an exact method of acquiring the equivalents of mechanical parameters from the topography of surfaces generated by abrasive waterjet cutting and external stress in general was determined. The results of the new approach to the construction of stress-strain diagrams are presented. The calculated values agreed very well with those obtained by a certified laboratory VÚHZ.

Mechanochemical reactions and syntheses of oxides.

Technological and scientific challenges coupled with environmental considerations have prompted a search for simple and energy-efficient syntheses and processing routes of materials. This tutorial review provides an overview of recent research efforts in non-conventional reactions and syntheses of oxides induced by mechanical action. It starts with a brief account of the history of mechanochemistry. Ensuing discussions will review the progress in homogeneous and heterogeneous mechanochemical reactions in oxides of various structures. The review demonstrates that the event of mechanically induced reactions provides novel opportunities for the non-thermal manipulation of materials and for the tailoring of their properties.

Mechanosynthesis of nanocrystalline fayalite, Fe2SiO4.

Nanostructured fayalite (α-Fe(2)SiO(4)) with a large volume fraction of interfaces is synthesized for the first time via single-step mechanosynthesis, starting from a 2α-Fe(2)O(3) + 2Fe + 3SiO(2) mixture. The nonequilibrium state of the as-prepared silicate is characterized by the presence of deformed polyhedra in the interface/surface regions of nanoparticles.

Transformations in oxides induced by high-energy ball-milling.

This paper, by no means exhaustive, focuses on high-energy ball-milling of oxides, on their mechanically induced changes and on the consequences of such changes on their physical and chemical properties. High-energy ball-milling offers a fortunate combination of technical simplicity and of complexity both of physical mechanisms which act during milling and of mechanosynthesized materials. Its basic interest, which stems from the large diversity of routes it offers to prepare oxides either directly or indirectly, is illustrated with various families of oxides. The direct path is to be favoured when as-milled oxides are of interest per se because of their nanocrystalline characteristics, their defects or their modified structures which result from mechanically driven phase transformations. The indirect path consists of a sequence of steps starting with mechanically activated oxides which may be subsequently just annealed or submitted to a combination of thermal treatments, with the possible occurrence of various chemical reactions, to prepare the sought-after materials with potential gains in processing temperatures and times. High energy ball-milling of oxides is more and more currently used to activate powders and to prepare nano-oxides at moderate temperatures. The interest of an activation step is well illustrated by the broad development of doped titania powders, synthesized by heat treatment of pre-ground reactants, for photocatalytic applications or to develop antibacterial materials. Another important class of applications of high-energy ball-milling is the formation of composites. It is exemplified here with the case of oxide-dispersed strengthened alloys whose properties are considerably improved by a dispersion of ultra-stable nanosized oxides whose formation mechanisms were recently described. The basic understanding of the mechanisms by which oxides or oxide mixtures evolve by high-energy ball-milling appears to be less advanced than it is for metallic materials essentially because of the overall complexity of the oxide structures, of their surfaces, of their defects and of their mechanical behavior.

Electrochemical insertion of lithium in mechanochemically synthesized Zn2SnO4.

We studied the electrochemical insertion of Li in mechanochemically prepared Zn(2)SnO(4). The mechanism of the electrochemical reaction was investigated by using X-ray diffraction, nuclear magnetic resonance spectroscopy, and Mössbauer spectroscopy. Changes in the morphology of the Zn(2)SnO(4) particles were studied by in situ scanning electron microscopy. The results were compared with mixtures of SnO(2) + ZnO and with Zn(2)SnO(4) prepared by conventional solid-state synthesis and showed that the mechanochemically prepared Zn(2)SnO(4) exhibits the best cyclic stability of these samples.

Mechanosynthesized nanocrystalline BaLiF(3): The impact of grain boundaries and structural disorder on ionic transport.

The mechanosynthesis of highly pure nanocrystalline BaLiF(3) is reported. The product with mean crystallite diameter of about 30 nm was prepared by joint high-energy ball-milling of the two binary fluorides LiF and BaF(2) at ambient temperature. Compared to coarse-grained BaLiF(3) with µm-sized crystallites, which is available via conventional solid-state synthesis at much higher temperatures, the mechanosynthesized product exhibits a drastic increase of ionic conductivity by several orders of magnitude. This is presumably due to structural disorder introduced during milling and to the presence of a large volume fraction of interfacial regions in the nanocrystalline form of BaLiF(3) providing fast diffusion pathways for the charge carriers. Starting from mechanosynthesized nanocrystalline BaLiF(3) it is possible to tune the transport parameters in a well defined way by subsequent annealing. Changes of the electrical response of mechanosynthesized BaLiF(3) during annealing are studied in situ by impedance spectroscopy. The results are compared with those of a structurally well-ordered single crystal which clearly shows extrinsic and intrinsic regions of ionic conduction.