Engendering High Energy Density LiFePO4 Electrodes with Morphological and Compositional Tuning.

Improving the energy density of Li-ion batteries is critical to meet the requirements of electric vehicles and energy storage systems. In this work, LiFePO4 active material was combined with single-walled carbon nanotubes as the conductive additive to develop high-energy-density cathodes for rechargeable Li-ion batteries. The effect of the morphology of the active material particles on the cathodes' electrochemical characteristics was investigated. Although providing higher packing density of electrodes, spherical LiFePO4 microparticles had poorer contact with an aluminum current collector and showed lower rate capability than plate-shaped LiFePO4 nanoparticles. A carbon-coated current collector helped enhance the interfacial contact with spherical LiFePO4 particles and was instrumental in combining high electrode packing density (1.8 g cm-3) with excellent rate capability (100 mAh g-1 at 10C). The weight percentages of carbon nanotubes and polyvinylidene fluoride binder in the electrodes were optimized for electrical conductivity, rate capability, adhesion strength, and cyclic stability. The electrodes that were formulated with 0.25 wt.% of carbon nanotubes and 1.75 wt.% of the binder demonstrated the best overall performance. The optimized electrode composition was used to formulate thick free-standing electrodes with high energy and power densities, achieving the areal capacity of 5.9 mAh cm-2 at 1C rate.

Fluorescent Nanoparticles Synthesized from DNA, RNA, and Nucleotides.

Ubiquitous on Earth, DNA and other nucleic acids are being increasingly considered as promising biomass resources. Due to their unique chemical structure, which is different from that of more common carbohydrate biomass polymers, materials based on nucleic acids may exhibit new, attractive characteristics. In this study, fluorescent nanoparticles (biodots) were prepared by a hydrothermal (HT) method from various nucleic acids (DNA, RNA, nucleotides, and nucleosides) to establish the relationship between the structure of precursors and fluorescent properties of biodots and to optimize conditions for preparation of the most fluorescent product. HT treatment of nucleic acids results in decomposition of sugar moieties and depurination/depyrimidation of nucleobases, while their consequent condensation and polymerization gives fluorescent nanoparticles. Fluorescent properties of DNA and RNA biodots are drastically different from biodots synthesized from individual nucleotides. In particular, biodots synthesized from purine-containing nucleotides or nucleosides show up to 50-fold higher fluorescence compared to analogous pyrimidine-derived biodots. The polymeric nature of a precursor disfavors formation of a bright fluorescent product. The reported effect of the structure of the nucleic acid precursor on the fluorescence properties of biodots should help designing and synthesizing brighter fluorescent nanomaterials with broader specification for bioimaging, sensing, and other applications.

Metal Ions Sensing by Biodots Prepared from DNA, RNA, and Nucleotides.

Nucleic acids that exhibit a high affinity toward noble and transition metal ions have attracted growing attention in the fields of metal ion sensing, toxic metal ion removal, and the construction of functional metal nanostructures. In this study, fluorescent nanoparticles (biodots) were synthesized from DNA, RNA, and RNA nucleotides (AMP, GMP, UMP, and CMP) using a hydrothermal (HT) method, in order to study their metal ion sensing characteristics. The fluorescent properties of biodots differ markedly between those prepared from purine and pyrimidine nucleobases. All biodots demonstrate a high sensitivity to the presence of mercury cations (Hg2+), while biodots prepared from DNA, RNA, and guanosine monophosphate (GMP) are also sensitive to Ag+ and Cu2+ ions, but to a lesser extent. The obtained results show that biodots inherit the metal ion recognition properties of nucleobases, while the nucleobase composition of biodot precursors affects metal ion sensitivity and selectivity. A linear response of biodot fluorescence to Hg2+ concentration in solution was observed for AMP and GMP biodots in the range 0-250 µM, which can be used for the analytic detection of mercury ion concentration. A facile paper strip test was also developed that allows visual detection of mercury ions in solutions.

Nanobiosensing with graphene and carbon quantum dots: Recent advances.

Graphene and carbon quantum dots (GQDs and CQDs) are relatively new nanomaterials that have demonstrated impact in multiple different fields thanks to their unique quantum properties and excellent biocompatibility. Biosensing, analyte detection and monitoring wherein a key feature is coupled molecular recognition and signal transduction, is one such field that is being greatly advanced by the use of GQDs and CQDs. In this review, recent progress on the development of biotransducers and biosensors enabled by the creative use of GQDs and CQDs is reviewed, with special emphasis on how these materials specifically interface with biomolecules to improve overall analyte detection. This review also introduces nano-enabled biotransducers and different biosensing configurations and strategies, as well as highlights key properties of GQDs and CQDs that are pertinent to functional biotransducer design. Following relevant introductory material, the literature is surveyed with emphasis on work performed over the last 5 years. General comments and suggestions to advance the direction and potential of the field are included throughout the review. The strategic purpose is to inspire and guide future investigations into biosensor design for quality and safety, as well as serve as a primer for developing GQD- and CQD-based biosensors.

Acid Doping of Phenyl-Capped Aniline Dimer: Intermolecular Polaron Formation Mechanism and Its Applicability to Polyaniline.

The acid doping process of the mixtures of N,N'-diphenyl-1,4-phenylenediamine (DPPD) and N,N'-diphenyl-1,4-quinonediimine (DPQD), reduced and oxidized phenyl-capped aniline dimers respectively, has been studied in detail by UV-vis-NIR and ESR spectroscopies. The addition of the acid to the mixtures of DPPD and DPQD leads to the formation of one type of radicals by intermolecular interactions. Full conversion of the aniline dimer molecules to the radical form is achievable only in stoichiometric mixtures of DPPD and DPQD. Concentration of radical species may change over time according to processes involving hydrolysis. The mechanisms of the acid doping of the phenyl-capped dimer process and subsequent side processes are proposed.

DNA-Assisted Solubilization of Carbon Nanotubes and Construction of DNA-MWCNT Cross-Linked Hybrid Hydrogels.

A simple method for preparation of DNA-carbon nanotubes hybrid hydrogel based on a two-step procedure including: (i) solubilization of multi-walled carbon nanotubes (MWCNT) in aqueous solution of DNA, and (ii) chemical cross-linking between solubilized MWCNT via adsorbed DNA and free DNA by ethylene glycol diglycidyl ether is reported. We show that there exists a critical concentration of MWCNT below which a homogeneous dispersion of MWCNT in hybrid hydrogel can be achieved, while at higher concentrations of MWCNT the aggregation of MWCNT inside hydrogel occurs. The strengthening effect of carbon nanotube in the process of hydrogel shrinking in solutions with high salt concentration was demonstrated and significant passivation of MWCNT adsorption properties towards low-molecular-weight aromatic binders due to DNA adsorption on MWCNT surface was revealed.

DNA hydrogel as a template for synthesis of ultrasmall gold nanoparticles for catalytic applications.

DNA cross-linked hydrogel was used as a matrix for synthesis of gold nanoparticles. DNA possesses a strong affinity to transition metals such as gold, which allows for the concentration of Au precursor inside a hydrogel. Further reduction of HAuCl4 inside DNA hydrogel yields well dispersed, non-aggregated spherical Au nanoparticles of 2-3 nm size. The average size of these Au nanoparticles synthesized in DNA hydrogel is the smallest reported so far for in-gel metal nanoparticles synthesis. DNA hybrid hydrogel containing gold nanoparticles showed high catalytic activity in the hydrogenation reaction of nitrophenol to aminophenol. The proposed soft hybrid material is promising as environmentally friendly and sustainable material for catalytic applications.

Extraction of Noble and Rare-Earth Metals from Aqueous Solutions by DNA Cross-Linked Hydrogels.

Invited for this month's cover is the group of Prof. Shizuaki Murata and Dr. Anatoly Zinchenko from Nagoya University and the group of Prof. Vladimir Sergeyev from Moscow State University. The cover picture shows the accumulation of noble and rare-earth metals by DNA cross-linked hydrogel. Read the full text of the article on page 619 ff..

Extraction of Noble and Rare-Earth Metals from Aqueous Solutions by DNA Cross-Linked Hydrogels.

Treasure trove: A method for the extraction of noble and rare-earth metals by a DNA cross-linked hydrogel, based on high DNA affinity to these elements, is described. The hydrogel is promising in applications for metal accumulation and recycling.

Thiol-mediated anchoring of silver cations to DNA for construction of nanofibers on DNA scaffold.

The formation of metal-containing Ag-mercaptoethanol (-Ag-S(R)-)(n) complexes on DNA chain scaffold was studied by UV spectroscopy, zeta potential measurement, and fluorescence and transmission electron microscopies. Experimental results made clear the mechanism of DNA mineralization and compaction, according to which intercalation of silver cations into DNA scaffold and further formation of (-Ag-S(R)-)(n) oligomeric complexes on DNA induce efficient DNA chain compaction by terminal Ag(+) cations. By transmission electron microscopy the formation of fiber-like DNA-templated nanostructures was observed. DNA-Ag-thiol complexes are promising for DNA-templated engineering of hybrid 1D nanostructures with adjustable chemical functionalities by choosing appropriate thiol ligand.

Nanoreactor-assisted polymerization toward stable dispersions of conductive composite particles.

We demonstrate the functioning of a macromolecular nanoreactor which guides a reaction in a confined volume and leads toward improved functional properties of a product material. In our approach, the polymerization of aniline (ANi) is conducted within the interfacial volume of spherical polyelectrolyte brushes (SPB) which are densely affixed to colloidal particles. The SPB provide optimal conditions for matrix polymerization by the efficient confinement of ANi monomers within the finite volume of polyelectrolyte brushes and controlled delivery of the oxidizing reagent to the reaction volume. The excellent kinetic stability of the resulting core-shell particles together with the high macroscopic conductivity of the respective composite open up perspectives for novel materials (a conductive ink).

Conformational behavior of giant DNA through binding with Ag+ and metallization.

The conformational behavior of a long single-chain double-stranded DNA in solutions of free silver ions and silver nanoparticles generated via the reduction of AgNO3 by NaBH4 was monitored by fluorescence and electron microscopies and UV spectroscopy. The interaction of monovalent silver ions with DNA induces shrinking of a DNA-coiled polymer chain as a result of a decrease in the DNA persistence length through the complexation of Ag+ with DNA bases. In contrast, the reduction of silver ions by NaBH4 in DNA solutions triggers DNA compaction: a DNA transition from elongated coil state into a compact state. This transition is continuous, unlike the all-or-none discrete DNA compaction that is commonly seen with multications. It is suggested that the collapse of DNA is accompanied by growth aggregation of silver nanoparticles generated on the DNA template.

DNA compaction by divalent cations: structural specificity revealed by the potentiality of designed quaternary diammonium salts.

DNA interaction with quaternary diammonium dications, R(CH(3))(2)N(+)(CH(2))(n)N(+)(CH(3))(2)R, having various intercharge distances, lengths, and branching, and the chemical nature of the hydrophobic substituents were investigated by fluorescent microscopy and circular dichroism (CD) spectroscopy to reveal their structural specificity for binding to DNA. The conformational behavior of DNA was found to be highly sensitive to the structure of the dications with separated charges. The distance between two ammonium groups greatly influences the compaction activity of the dications. To explain this situation, we proposed a model that demonstrates that the charge density of the dication and the geometric fit between DNA phosphates and the ammonium groups in the dications play an important role in providing efficient DNA collapse. Elongation of the alkyl substituents (R) in the diammonium salts from ethyl to hexyl did not generate any significant alterations in the compaction activities, whereas the branching of substituents caused a drastic decrease in their compaction ability. Based on the results of CD spectroscopy, it was found that the ability of the dications to provoke a DNA transition from the B-form to A-form was also specific: it depended on their intercharge distances and was independent of the length of alkyl substituents.

Controlling the intrachain segregation on a single DNA molecule.

Intrachain segregation in single DNA molecules induced by quaternary ammonium dications was studied. By means of fluorescent and electron microscopy, it was found that variations in the chemical structure of condensing agents provide one with the opportunity to control the average amount of intrachain segregation centers on the DNA single chain. The manner of interaction between the diammonium molecules was considered to be the key factor for controlling the morphology of the partially collapsed DNA molecules.

Secondary structure of DNA is recognized by slightly cross-linked cationic hydrogel.

Interaction of salmon sperm DNA (300-500 bp) and ultrahigh molecular mass DNA (166 kbp) from bacteriophage T4dC with linear poly(N-diallyl-N-dimethylammonium chloride) (PDADMAC) and slightly cross-linked (#) PDADMAC (#PDADMAC) hydrogel in water has been studied by means of UV-spectroscopy, ultracentrifugation, atomic force, and fluorescence microscopy (FM). It is found that the linear polycation induced compaction of either native (double-stranded) or denatured (single-stranded) DNA by forming PDADMAC-DNA interpolyelectrolyte complexes (IPEC)s. At the same time, #PDADMAC hydrogel is able to distinguish between native and denatured DNA. Native DNA is adsorbed and captured in the hydrogel surface layer, while denatured DNA diffuses to the hydrogel interior until the whole hydrogel sample is transformed into the cross-linked IPEC. Both native and denatured DNA can be completely released from the hydrogel in appropriate conditions with no degradation by adding a low molecular salt. The data observed using conventional physicochemical methods with respect to DNA of a moderate molecular mass remarkably correlate with the pictures directly observed for ultrahigh molecular mass DNA in dynamics by using FM.