A Conceptual Approach for the Design of New Catalysts for Ammonia Synthesis: A Metal-Support Interactions Review.

The growing interest in green ammonia production has spurred the development of new catalysts with the potential to carry out the Haber-Bosch process under mild pressure and temperature conditions. While there is a wide experimental background on new catalysts involving transition metals, supports and additives, the fundamentals behind ammonia synthesis performance on these catalysts remained partially unsolved. Here, we review the most important works developed to date and analyze the traditional catalysts for ammonia synthesis, as well as the influence of the electron transfer properties of the so-called 3rd-generation catalysts. Finally, the importance of metal-support interactions is highlighted as an effective pathway for the design of new materials with potential to carry out ammonia synthesis at low temperatures and pressures.

Metal-Organic Frameworks as Formose Reaction Catalysts with Enhanced Selectivity.

The formose reaction is an autocatalytic series of aldol condensations that allows one to obtain monosaccharides from formaldehyde. The formose reaction suffers from a lack of selectivity, which hinders practical applications at the industrial level. Over the years, many attempts have been made to overcome this selectivity issue, with modest results. Heterogeneous porous catalysts with acid-base properties, such as Metal-Organic Frameworks (MOFs), can offer advantages compared to homogeneous strong bases (e.g., calcium hydroxide) for increasing the selectivity of this important reaction. For the very first time, four different Zeolite Imidazolate Frameworks are presented in this work as catalysts for the formose reaction in liquid phase, and their catalytic performances were compared with those of the typical homogeneous catalyst (i.e., calcium hydroxide). The heterogeneous nature of the catalysis, the possible contribution of leached metal or linkers to the solution, and the stability of the materials were investigated. The porous structure of these solids and their mild basicity make them suitable for obtaining enhanced selectivity at 30% formaldehyde conversion. Most of the MOFs tested showed low structural stability under reaction conditions, thereby indicating the need to search for new MOF families with higher robustness. However, this important result opens the path for future research on porous heterogeneous basic catalysts for the formose reaction.

Facile Synthesis of Heterogeneous Indium Nanoparticles for Formate Production via CO2 Electroreduction.

In this study, a simple and scalable method to obtain heterogeneous indium nanoparticles and carbon-supported indium nanoparticles under mild conditions is described. Physicochemical characterization by X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed heterogeneous morphologies for the In nanoparticles in all cases. Apart from In0, XPS revealed the presence of oxidized In species on the carbon-supported samples, whereas these species were not observed for the unsupported samples. The best-in-class catalyst (In50/C50) exhibited a high formate Faradaic efficiency (FE) near the unit (above 97%) at -1.6 V vs. Ag/AgCl, achieving a stable current density around -10 mA·cmgeo-2, in a common H-cell. While In0 sites are the main active sites for the reaction, the presence of oxidized In species could play a role in the improved performance of the supported samples.

Thermomechanical Performance Analysis of Novel Cement-Based Building Envelopes with Enhanced Passive Insulation Properties.

The design of new insulating envelopes is a direct route towards energy efficient buildings. The combinations of novel materials, such as phase-change (PCM), and advanced manufacturing techniques, such as additive manufacturing, may harness important changes in the designing of building envelopes. In this work we propose a novel methodology for the design of cement-based building envelopes. Namely, we combined the use of a multiscale, multiphysical simulation framework with advanced synthesis techniques, such as the use of phase-change materials and additive manufacturing for the design of concrete envelopes with enhanced insulation properties. At the material scale, microencapsulated PCMs are added to a cementitious matrix to increase heat storage. Next, at the component level, we create novel designs for the blocks, here defined as HEXCEM, by means of additive manufacturing. The material and component design process is strongly supported on heat transfer simulations with the use of the finite element method. Effective thermal properties of the mixes can be obtained and subsequently used in macroscale simulations to account for the effect of the volume fraction of PCMs. From the experimental and numerical tests, we report an increase in the the thermal inertia, which results in thermal comfort indoors.

Barriers for the Implementation of Liquid Biofuels.

Transportation accounts for nearly one third of the total energy consumed worldwide and, unlike other sectors, it relies almost exclusively (96%) on petroleum [...].

Improved Thermochemical Energy Storage Behavior of Manganese Oxide by Molybdenum Doping.

To improve the thermochemical energy storage (TCS) behavior of Mn2O3, several Mn-Mo oxides with varying amounts of MoO3 (0-30 wt%) were prepared by a precipitation method. The physico-chemical properties of the solids were studied by N2 adsorption-desorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), and H2-temperature-programmed reduction (TPR), while their TCS behavior was determined by thermogravimetric analysis coupled with differential scanning calorimetry (TGA-DSC). Apart from Mn2O3 and MoO3 phases, XRD revealed a mixed MnMoO4 phase for MoO3 loadings equal or higher than 1.5 wt%. All samples showed a well-formed coral-like surface morphology, particularly those solids with low MoO3 contents. This coral morphology was progressively decorated with compact and Mo-enriched MnMoO4 particles as the MoO3 content increased. TPR revealed that the redox behavior of Mn2O3 was significantly altered upon addition of Mo. The TCS behavior of Mn2O3 (mostly oxidation kinetics and redox cyclability) was enhanced by addition of low amounts of Mo (0.6 and 1.5% MoO3) without significantly increasing the reduction temperature of the solids. The coral morphology (which facilitated oxygen diffusion) and a smoother transition from the reduced to oxidized phase were suggested to be responsible for this improved TCS behavior. The samples containing 0.6 and 1.5 wt% of MoO3 showed outstanding cyclability after 45 consecutive reduction-oxidation cycles at high temperatures (600-1000 °C). These materials could potentially reach absorption efficiencies higher than 90% at concentration capacity values typical of concentrated solar power plants.

Biomass: A Renewable Source of Fuels, Chemicals and Carbon Materials.

Fossil fuels have been long used as a source of carbon for synthetizing the fuels, chemicals, and carbon-based materials we use on a daily basis [...].

Catalytic Production of Jet Fuels from Biomass.

Concerns about depleting fossil fuels and global warming effects are pushing our society to search for new renewable sources of energy with the potential to substitute coal, natural gas, and petroleum. In this sense, biomass, the only renewable source of carbon available on Earth, is the perfect replacement for petroleum in producing renewable fuels. The aviation sector is responsible for a significant fraction of greenhouse gas emissions, and two billion barrels of petroleum are being consumed annually to produce the jet fuels required to transport people and goods around the world. Governments are pushing directives to replace fossil fuel-derived jet fuels with those derived from biomass. The present mini review is aimed to summarize the main technologies available today for converting biomass into liquid hydrocarbon fuels with a molecular weight and structure suitable for being used as aviation fuels. Particular emphasis will be placed on those routes involving heterogeneous catalysts.

Interplay of Support Chemistry and Reaction Conditions on Copper Catalyzed Methanol Steam Reforming.

A series of Cu catalysts supported on SiO2, Al2O3-SiO2, TiO2 rutile, and Cu/TiO2 anatase metal oxides has been studied for methanol reforming in the vapor phase. The highest activity was obtained on Cu/SiO2 catalysts (5493 µmol H2 min-1·gcat -1) followed by Cu/TiO2 rutile, Cu/Al2O3-SiO2, and anatase. XRD and HRTEM characterization after reaction revealed that on Cu/SiO2 significant sintering occurred during reaction. In contrast, the particle size growth on Cu/TiO2 rutile and anatase was less pronounced, which could be associated with the interaction between Cu clusters and TiO2. Characterization by TGA showed that on Cu/Al2O3-SiO2 the main cause of deactivation was coke deposition.

Efficient room-temperature O-silylation of alcohols using a SBA-15-supported cobalt(II) nanocatalyst.

The O-silylation of OH groups of alcohols and phenols with hexamethyldisilazane (HMDS) was achieved in high-to-excellent yields using catalytic quantities of a SBA-15-supported cobalt(II) nanocatalyst (typically 0.5 mol-%) at room temperature and under solvent-free conditions. Furthermore, the heterogeneous catalyst showed an excellent durability and can be conveniently reused by filtration for at least twelve times without any noticeable loss of activity.

Transformations of biomass-derived platform molecules: from high added-value chemicals to fuels via aqueous-phase processing.

Global warming issues and the medium-term depletion of fossil fuel reserves are stimulating researchers around the world to find alternative sources of energy and organic carbon. Biomass is considered by experts the only sustainable source of energy and organic carbon for our industrial society, and it has the potential to displace petroleum in the production of chemicals and liquid transportation fuels. However, the transition from a petroleum-based economy to one based on biomass requires new strategies since the petrochemical technologies, well-developed over the last century, are not valid to process the biomass-derived compounds. Unlike petroleum feedstocks, biomass derived platform molecules possess a high oxygen content that gives them low volatility, high solubility in water, high reactivity and low thermal stability, properties that favour the processing of these resources by catalytic aqueous-phase technologies at moderate temperatures. This tutorial review is aimed at providing a general overview of processes, technologies and challenges that lie ahead for a range of different aqueous-phase transformations of some of the key biomass-derived platform molecules into liquid fuels for the transportation sector and related high added value chemicals.

Catalytic conversion of renewable biomass resources to fuels and chemicals.

Lignocellulosic biomass is renewable and cheap, and it has the potential to displace fossil fuels in the production of fuels and chemicals. Biomass-derived carboxylic acids are important compounds that can be used as platform molecules for the production of a variety of important chemicals on a large scale. Lactic acid, a prototypical biomass derivative, and levulinic acid, an important chemical feedstock produced by hydrolysis of waste cellulosic materials, can be upgraded using bifunctional catalysts (those containing metal and acid sites), which allows the integration of several transformations (e.g., oxygen removal and C-C coupling) in a single catalyst bed. This coupling between active sites is beneficial in that it reduces the complexity and cost of the biomass conversion processes. Deoxygenation of biomass derivatives is a requisite step for the production of fuels and chemicals, and strategies are proposed to minimize the consumption of hydrogen from an external source during this process.

Catalytic processing of lactic acid over Pt/Nb(2)O(5).

Dilute aqueous solutions of lactic acid (30 %wt.) can be catalytically processed at 573 K and 57 bar over a low-metal-content Pt(0.1 %)/Nb(2)O(5) catalyst in a spontaneously separating organic phase rich in valuable products such as C(4)-C(7) ketones. An increase in the lactic acid concentration to 60 wt % allows conversion of approximately 50 % of the carbon feed in this organic layer, while maintaining good stability of the catalyst. Experiments at low conversion showed that lactic acid reacts first over Pt(0.1 %)/Nb(2)O(5) to produce acetaldehyde and propanoic acid (along with CO and CO(2) in the gas phase). These compounds (less oxygenated than lactic acid but still reactive) are the key intermediates in the overall process, and they react differently depending on the nature of the catalyst support. In particular, reaction kinetics studies with propanoic acid as feed showed that Pt(0.1 %)/Nb(2)O(5) favored the formation of pentanones by ketonization reactions, whereas a monofunctional Pt(0.1 %)/carbon catalyst produced ethane and CO(x) by decomposition reactions. In the same manner, acetaldehyde was preferentially hydrogenated to ethanol over Pt(0.1 %)/carbon, whereas the presence of niobia allowed this intermediate to react (by successive aldol condensations) to form C(4)-C(7) condensation products stored in the organic phase. Finally, reaction pathways are proposed to explain the catalytic processing of lactic acid over bifunctional Pt(0.1 %)/Nb(2)O(5). In this scheme, metal sites catalyze hydrogenation reactions and niobia promotes C--C coupling processes (ketonization and aldol condensation), in contrast to C--C cleavage reactions which take place preferentially over Pt(0.1 %)/carbon and lead to loss of carbon in the gas effluent as CO, CO(2), and methane.

Catalytic conversion of biomass to monofunctional hydrocarbons and targeted liquid-fuel classes.

It is imperative to develop more efficient processes for conversion of biomass to liquid fuels, such that the cost of these fuels would be competitive with the cost of fuels derived from petroleum. We report a catalytic approach for the conversion of carbohydrates to specific classes of hydrocarbons for use as liquid transportation fuels, based on the integration of several flow reactors operated in a cascade mode, where the effluent from the one reactor is simply fed to the next reactor. This approach can be tuned for production of branched hydrocarbons and aromatic compounds in gasoline, or longer-chain, less highly branched hydrocarbons in diesel and jet fuels. The liquid organic effluent from the first flow reactor contains monofunctional compounds, such as alcohols, ketones, carboxylic acids, and heterocycles, that can also be used to provide reactive intermediates for fine chemicals and polymers markets.