Polyethylene liner dissociation in cementless total hip arthroplasty: Ensuring accurate diagnosis.

BACKGROUND: Uncemented acetabular components are widely used in modern total hip arthroplasty (THA). Modularity has numerous advantages including the ability to use supplementary screw fixation for the shell, and allow to switch from ceramic to polyethylene (PE) bearings and vice versa, and the use of lipped and face-changing liners. OBJECTIVE: Despite these advantages, a problem with modular PE liners is dissociation. This is a rare complication in modern implants. The rate of liner dissociation is reported to be very low between 0.17% and 0.8%. Typical symptoms are sudden onset of groin pain in a previously well-functioning hip joint, followed by grinding or clicking sensations during hip joint motions indicating, that the femoral head is articulating with the metal acetabular shell rather than with the PE liner. Any newly observed noise or squeaking from a THA should undergo radiographic investigation to exclude liner dissociation. CASE PRESENTATION: We present the case of an 88-yearold male patient who developed PE liner dissociation in a cementless THA with a Pinnacle acetabular component six years after the index operation. We recommended revision of the left hip, which was performed two days later. In the interim, the patient was advised to use a pair of crutches. During revision surgery, it was observed that the metal head made contact with the cementless cup shell without damaging it from a macroscopic standpoint. Consequently, a simple exchange of the PE liner was conducted, and a 36 mm metal head was implanted due to scratches on the original head. CONCLUSION: Early diagnosis facilitates a straightforward exchange of the liner along with the head, potentially preserving the osseous integrated cup shell and stem integrity. Routine radiologic follow-up allows to distinguish between PE liner dissociation and severe PE wear.

Long-Term Clinical and Radiologic Outcome Following Surgical Treatment of Lumbar Spondylodiscitis: A Retrospective Bicenter Study.

BACKGROUND AND STUDY AIMS: Spinal instrumentation for spondylodiskitis (SD) remains highly controversial. To date, surgical data are limited to relatively small case series with short-term follow-up data. In this study, we wanted to elucidate the biomechanical, surgical, and neurologic long-term outcomes in these patients. MATERIAL AND METHODS: A retrospective analysis from two German primary care hospitals over a 9-year period (2005-2014) was performed. The inclusion criteria were (1) pyogenic lumbar SD, (2) minimum follow-up of 1 year, and (3) surgical instrumentation. The clinical and radiologic outcome was assessed before surgery, at discharge, and at a minimum of 12 months of follow-up. Follow-up included physical examination, laboratory results, CT and MRI scans, as well as assessment of quality of life (QoL) using short-form health survey (SF-36) inventory, Oswestry Disability Questionnaire, and visual analog scale (VAS) spine score. RESULTS: Complete data were available in 70 patients (49 males and 21 females, with an age range of 67±12.3 years) with a median follow-up of 6.6 ± 4.2 years. Follow-up data were available in 70 patients after 1 year, in 58 patients after 2 years, and in 44 patients after 6 years. Thirty-five patients underwent posterior stabilization and decompression alone and 35 patients were operated on in a two-stage 360-degree interbody fusion with decompression. Pre- and postoperative angles of the affected motion segment were 17.6 ± 10.2 and 16.1 ± 10.7 degrees in patients with posterior instrumentation only and 21.0 ± 10.2 and 18.3 ± 10.5 degrees in patients with combined anterior/posterior fusion. Vertebral body subsidence was seen in 12 and 6 cases following posterior instrumentation and 360-degree instrumentation, respectively. Nonfusion was encountered in 22 and 11 cases following posterior instrumentation and 360-degree instrumentation, respectively. The length of hospital stay was 35.0 ± 24.5 days. Surgery-associated complication rate was 18% (12/70). New neurologic symptoms occurred in 7% (5/70). Revision surgery was performed in 3% (2/70) due to screw misplacement/hardware failure and in 3% (2/70) due to intraspinal hematoma. Although patients reported a highly impaired pain deception and vitality, physical mobility was unaffected and pain disability during daily activities was moderate. CONCLUSION: Surgical treatment of SD with a staged surgical approach (if needed) is safe and provides very good long-term clinical and radiologic outcome.

How Do Classic (Static) RSA and Patient Motion Artifacts Affect the Assessment of Migration of a TKA Tibial Component? An In Vitro Study.

BACKGROUND: Classic (static) Roentgen stereophotogrammetric analysis (RSA) is the current gold standard to assess, in vivo, the migration of total joint arthroplasty components. To prevent potential patient motion artifacts during the acquisition of paired radiostereometric images, images must be taken by simultaneously firing both X-ray tubes. However, the influence of nonsynchronized RSA paired images or patient motion artifacts on the precision of RSA and the assessment of implant migration is not well understood. QUESTIONS/PURPOSES: We assessed (1) the effect of possible patient motion on the precision of RSA and (2) apparent differences in implant migration among axes (in-plane and out-of-plane translations and in-plane and out-of-plane rotations) of possible motion artifacts. METHODS: Radiographs of two tibial knee arthroplasty components, each fixed in two bone-implant models as a customized phantom, were taken in a uniplanar measurement setup. We evaluated both model-based (implant models from reversed engineering) and marker-based (additional attached implant markers) RSA approaches. Between the simulated reference and follow-up examinations, we used one of the bone-implant models to simulate patient motion and the other to simulate no patient motion in parallel. Two defined protocols were followed for each of the bone-implant models: no-motion and simulated motion protocols. RSA image pairs were analyzed using a model-based RSA software package (MBRSA 4.1, RSA core ). Precision was calculated through repeat examinations, and migration of the two components was assessed for comparison of the components with each other. Measurements were taken along the medial-lateral and posterior-anterior axes for translations and around the cranial-caudal axis for rotations. The maximum total point motion was measured for comparison between the two components. RESULTS: The effect of simulated patient motion was generally small, except in the cranial-caudal axis, but the induced imprecision associated with motion was larger in model-based RSA than it was in marker-based RSA. The mean ± standard deviation values of precision in model-based RSA were 0.035 ± 0.015 mm, 0.045 ± 0.014 mm, and 0.049 ± 0.036 mm greater than those in marker-based RSA, in accordance with the simulated motion protocol in translations along the medial-lateral axis (0.018 ± 0.004 mm; p = 0.01), along the posterior-anterior axis (0.018 ± 0.007 mm; p = 0.003), and rotations around the cranial-caudal axis (0.017 ± 0.006 mm; p = 0.02). Apparent differences in implant migration were the greatest for the maximum total point motion. The maximum total point motion increased from 0.038 ± 0.007 mm for the no-motion protocol to 1.684 ± 0.038 mm (p < 0.001) for the simulated motion protocol in marker-based RSA, and from 0.101 ± 0.027 mm for the no-motion protocol to 1.973 ± 0.442 mm (p < 0.001) for the simulated motion protocol in model-based RSA, and was the worst-case scenario regarding patient motion artifacts. CONCLUSION: Patient motion exceeding 1 mm or 1° on nonsynchronized RSA images affects measurement errors regarding the detection of migration of a tibial component. In clinical RSA studies, the effect of patient motion on the assessment of implant migration should be of particular concern, even if clinical RSA systems have acceptable precision. Specially trained radiographers are crucial for correctly acquiring radiographs, especially when simultaneous radiography exposures are not electronically automated. In general, RSA requires synchronized image acquisition, and this should be the state-of-the-art. CLINICAL RELEVANCE: In clinical RSA studies, precision assessed by repeat examinations may not be reliable using the current standards that are widely used in radiology departments. When assessing implant migration for reliability, comparison of the maximum total point motion between the tested (simulated motion) implant and baseline (no-motion) implant, as in this study, is advocated because of the accurate detection of patient motion artifacts.

A cross-sectional survey of German PA employment and workforce entry.

OBJECTIVE: The contribution of physician assistants (PAs) to the German healthcare workforce has increased significantly since their introduction in 2005. From five training programs, the number has increased to the current 18, with 560 PAs awarded the PA bachelor of science degree as of 2020. Despite the growth, researchers lack systemic and reliable empirical data that provide insight into the German PA educational and professional profile. The German University Association Physician Assistant (DHPA) undertook the first nationwide cross-sectional survey on PAs in Germany to understand the German PA movement. This survey aimed to describe German PAs' entry into the profession and PA educational and job satisfaction. METHODS: PA alumni of all universities affiliated with the DHPA and all subscribers of the Facebook online social media platform PA Blog were invited to complete an online questionnaire. RESULTS: Of the 282 PAs who completed the survey, 77% were female and under age 25 years. Almost all (94%) were employed, predominantly as PAs (91%, 241 of 265), although some held other positions. Most worked full time (87%), with some citing child-care needs as reasons for part-time employment (n = 21). Few reported unemployment (1.4%, 4 of 282). Eighty-two percent said they would probably or very likely choose the same course of study again. Most employed participants found the inclusion of frequent rotations between didactic and clinical training in PA programs beneficial. However, a small number of participants (26.8%) agreed that German PA programs' didactic and clinical teaching objectives were well aligned. CONCLUSIONS: German PAs have a high level of satisfaction with their profession and report low unemployment. Improvement in the alignment of didactic and clinical educational objectives to improve academic qualifications and satisfaction emerged as an area of research.

Production and Secretion of Gelsolin by Both Human Macrophage- and Fibroblast-like Synoviocytes and GSN Modulation in the Synovial Fluid of Patients with Various Forms of Arthritis.

Gelsolin (GSN) is an actin-binding protein involved in cell formation, metabolism and wound closure processes. Since this protein is known to play a role in arthritis, here we investigate how the synovial membrane with its specific synoviocytes contributes to the expression of GSN and how the amount of GSN expressed is modulated by different types of arthritis. Synovial membranes from adult healthy subjects and patients with rheumatoid arthritis (RA) and osteoarthritis (OA) are analyzed by immunofluorescence, Western blot and ELISA. Macrophage-like synoviocytes (MLS) and fibroblast-like synoviocytes (FLS) were isolated, cultured and analyzed for their potential to produce and secrete GSN. In addition, the GSN concentrations in the synovial fluid of various forms of arthritis are determined by ELISA. GSN is produced by the healthy and arthritic synovial membranes. Both forms of synoviocytes (MLS and FLS) release GSN. The results show that there is a significant reduction in GSN in the synovial fluid in adult patients with OA. This reduction is also detectable in adult patients with RA but is not as evident. In juvenile arthritis, there is a slight increase in GSN concentration in the synovial fluid. This study shows that primary MLS and FLS express GSN and that these cells, in addition to articular chondrocytes, contribute to GSN levels in synovial fluid. Furthermore, GSN concentrations are modulated in different types of arthritis. Further studies are needed to fully understand how GSN is involved in joint homeostasis.

Preoperative planning of total knee arthroplasty: reliability of axial alignment using a three-dimensional planning approach.

BACKGROUND: Preoperative templating of total knee arthroplasty (TKA) can nowadays be performed three-dimensionally with software solutions using computed tomography (CT) datasets. Currently there is no consensus concerning the axial orientation of TKA components in three-dimensional (3D) planning. PURPOSE: To assess intra-/inter-observer reliability of detection of different bony landmarks in planning axial component alignment using axial CT images and 3D reconstructions. MATERIAL AND METHODS: Intra- and inter-observer reliability of determination of four predefined axial femoral and tibial axes was calculated using data from CT scans. Axes determination was performed on the axial slices and on the 3D reconstruction using preoperative planning software. In summary, 61 datasets were analyzed by one medical student (intra-observer reliability) and 15 datasets were analyzed by four different observers independently (inter-observer reliability). RESULTS: For the femur, clinical epicondylar axis and posterior condylar axis showed the best reliability with an inter-observer variability of 0.7° and 0.5°, respectively. For the tibia, posterior condylar axis provided best reliability (inter-observer variability: 1.7°). Overall variability was greater for tibial than for femoral axes. Reliability of axis determination was more accurate using axial CT slices rather than 3D reconstructions. CONCLUSION: The femoral clinical epicondylar axis is highly reliable. Landmarks for the tibia are not as easily identifiable as for the femur. The tibial posterior condylar axis presents the axis with highest reliability. Based on these results, clinical epicondylar axis for orientation of the femoral TKA component and posterior condylar axis for the tibial implant, both defined on axial slices can be recommended.