Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment.

In this study, two biodegradable Mg-Zn-Ca alloys with alloy content of less than 1 wt % were strengthened via high pressure torsion (HPT). A subsequent heat treatment at temperatures of around 0.45 Tm led to an additional, sometimes even larger increase in both hardness and tensile strength. A hardness of more than 110 HV and tensile strength of more than 300 MPa were achieved in Mg-0.2Zn-0.5Ca by this procedure. Microstructural analyses were conducted by scanning and transmission electron microscopy (SEM and TEM, respectively) and atom probe tomography (APT) to reveal the origin of this strength increase. They indicated a grain size in the sub-micron range, Ca-rich precipitates, and segregation of the alloying elements at the grain boundaries after HPT-processing. While the grain size and segregation remained mostly unchanged during the heat treatment, the size and density of the precipitates increased slightly. However, estimates with an Orowan-type equation showed that precipitation hardening cannot account for the strength increase observed. Instead, the high concentration of vacancies after HPT-processing is thought to lead to the formation of vacancy agglomerates and dislocation loops in the basal plane, where they represent particularly strong obstacles to dislocation movement, thus, accounting for the considerable strength increase observed. This idea is substantiated by theoretical considerations and quenching experiments, which also show an increase in hardness when the same heat treatment is applied.

Grain boundary excess volume and defect annealing of copper after high-pressure torsion.

The release of excess volume upon recrystallization of ultrafine-grained Cu deformed by high-pressure torsion (HPT) was studied by means of the direct technique of high-precision difference dilatometry in combination with differential scanning calorimetry (DSC) and scanning electron microscopy. From the length change associated with the removal of grain boundaries in the wake of crystallite growth, a structural key quantity of grain boundaries, the grain boundary excess volume or expansion [Formula: see text] m was directly determined. The value is quite similar to that measured by dilatometry for grain boundaries in HPT-deformed Ni. Activation energies for crystallite growth of [Formula: see text] and [Formula: see text] are derived by Kissinger analysis from dilatometry and DSC data, respectively. In contrast to Ni, substantial length change proceeds in Cu at elevated temperatures beyond the regime of dominant crystallite growth. In the light of recent findings from tracer diffusion and permeation experiments, this is associated with the shrinkage of nanovoids at high temperatures.