Electrochemical HPLC Determination of Piperazine Antihistamine Drugs Employing a Spark-Generated Nickel Oxide Nanoparticle-Modified Carbon Fiber Microelectrode.

In this work, we demonstrate a sensitive high-performance liquid chromatography (HPLC) method for the determination of piperazine antihistamine drugs employing innovative electrochemical detection based on a spark-generated nickel oxide nanoparticle-modified carbon fiber microelectrode built into a miniaturized electrochemical detector. The direct carbon fiber-to-nickel plate electrode spark discharge, carried at 0.8 kV DC, with the nickel electrode connected to the negative pole of the high-voltage power supply, provides extremely fast (1 s) in situ tailoring of the carbon fiber microelectrode surface by nickel oxide nanoparticles. It has been found that nickel oxide nanoparticles exhibit an electrocatalytic effect toward the piperazine moiety electrooxidation process, as confirmed by voltammetric experiments, revealing the shift in the peak potential from 1.25 to 1.09 V versus Ag/AgCl. Cetirizine, cyclizine, chlorcyclizine, flunarizine, meclizine, and buclizine were selected as sample piperazine antihistamine drugs, while diclofenac served as an internal standard. The isocratic reversed-phase separation of the above set was achieved within 15 min using an ARION-CN 3 µm column with a binary mobile phase consisting of 50 mM phosphate buffer (pH 3) and methanol (45/55, v/v). The limits of detection (LOD) were within the range of 3.8-120 nM (for cyclizine and buclizine) at E = +1500 mV (vs Ag/AgCl), while the response was linear within the concentration range measured up to 5 µmol L-1. The method was successfully applied to the determination of piperazine antihistamine drugs in spiked plasma samples.

Imaging of growth factors on a human tooth root canal by surface-enhanced Raman spectroscopy.

Endodontic treatment of immature permanent teeth with necrotic pulp poses several clinical challenges and is one of the most demanding interventions in endodontics. Recently, with new discoveries in the field of tissue engineering, novel treatment protocols have been established. The most promising treatment modality is revascularization, whose integral part is the exposure of collagen matrix and embedded growth factors. However, optimization of the treatment protocol requires a development of analytical procedures able to analyze growth factors directly on the sample surface. In this work, method based on surface-enhanced Raman spectroscopy (SERS) was developed to investigate the influence of the time of the medical treatment using EDTA on exposure and accessibility of the growth factors, namely TGF-ß1, BMP-2, and bFGF on the dentine surface. The nanotags, which consist of magnetic Fe3O4@Ag nanocomposite covalently functionalized by tagged antibodies (anti-TGF-ß1-Cy3, anti-BMP-2-Cy5, and anti-bFGF-Cy7), were employed as a SERS substrate. Each antibody was coupled with a unique label allowing us to perform a parallel analysis of all three growth factors within one analytical run. Developed methodology presents an interesting alternative to a fluorescence microscopy and in contrary allows evaluating a chemical composition and thus minimizing possible false-positive results. Graphical abstract.

Enantioseparation of d,l-2-hydroxyglutaric acid by capillary electrophoresis with tandem mass spectrometry-Fast and efficient tool for d- and l-2-hydroxyglutaracidurias diagnosis.

A novel capillary electrophoresis-tandem mass spectrometry method for the enantioseparation and identification of 2-hydroxyglutaric acid enantiomers without derivatization for clinical purposes was described. Vancomycin chloride was used as an efficient chiral selector for the discrimination of 2-hydroxyglutaric acid enantiomers by capillary electrophoresis employed complete capillary filling method. The obtained resolution was 2.05. Hyphenation of CE with tandem mass spectrometry allows a reliable identification of separated enantiomers as well as their quantification. The method was validated and applied for the separation, identification and determination of 2-hydroxyglutaric enantiomers in urine samples obtained from healthy patients and two urine samples obtained from child patients suffering from high urine excretion of 2-hydroxyglutaric acid. Abnormal excretion of d-hydroxyglutaric acid was found in both child urine samples (104.5±2.1 and 2200.0±12.6mmol/mol of creatinine, respectively). The limits of detection for d- and l-hydroxyglutaric acid were 31 and 38nmol/L, respectively.

Novel cationic coating agent for protein separation by capillary electrophoresis(†).

A novel positively charged surfactant N-dodecyl-N,N-dimethyl-(1,2-propandiol) ammonium chloride was used for the dynamic coating of the inner wall of a silica capillary. This paper covers the evaluation of dynamic coating and study of the influence of the analysis conditions for the magnitude and direction of electroosmotic flow as well as for the effective and selective separation of chosen proteins (ribonuclease A, cytochrome c, lysozyme, and myoglobin). The concentration of 0.1 mM of N-dodecyl-N,N-dimethyl-(1,2-propandiol) ammonium chloride enabled the reversal of the electro-osmotic flow, however, to separate basic as well as neutral proteins the higher concentration of the studied surfactant was necessary. The final conditions for the separation of studied proteins were set at 100 mM sodium acetate pH 5.5 with 10.0 mM of the studied surfactant. The results were also compared with those of two commercially available cationic surfactants, cetyltrimethylammonium bromide and dodecyltrimethylammonium bromide. Additionally, the developed method for protein separation was applied for the determination of lysozyme in a cheese sample. The limits of detection and quantification of lysozyme were 0.9 and 3.0 mg/L, respectively. The mean concentration of lysozyme found in the cheese sample was 167.3 ± 10.3 mg/kg.

Enantiomeric separation of 1,3-dimethylamylamine by capillary electrophoresis with indirect UV detection using a dual-selector system.

The CE method employing an indirect UV detection for the enantioseparation of 1,3-dimethylamylamine (DMAA), widely used in various preworkout and dietary supplements labeled as a constituent of geranium extract has been developed. The dual-selector system consisting of negatively charged sulfated α-CD (1.1% w/v) and sulfated ß-CD (0.2% w/v) in 5 mM phosphate/Tris buffer (pH 3.0) containing the addition of 10 mM benzyltriethylammonium chloride (BTEAC) as the chromophoric additive was used for the enantiomeric separation of DMAA stereoisomers with the LODs in the range of 7.82-9.24 µg/mL. The method was partly validated and applied for the determination of the stereoisomeric composition of DMAA in commercial dietary supplements to verify the potential natural origin of DMAA.

Determination and identification of synthetic cannabinoids and their metabolites in different matrices by modern analytical techniques - a review.

Synthetic cannabinoids have gained popularity due to their easy accessibility and psychoactive effects. Furthermore, they cannot be detected in urine by routine drug monitoring. The wide range of active ingredients in analyzed matrices hinders the development of a standard analytical method for their determination. Moreover, their possible side effects are not well known which increases the danger. This review is focused on the sample preparation and the determination of synthetic cannabinoids in different matrices (serum, urine, herbal blends, oral fluid, hair) published since 2004. The review includes separation and identification techniques, such as thin layer chromatography, gas and liquid chromatography and capillary electrophoresis, mostly coupled with mass spectrometry. The review also includes results by spectral methods like infrared spectroscopy, nuclear magnetic resonance or direct-injection mass spectrometry.

Enantiomeric separation of tapentadol by capillary electrophoresis--study of chiral selectivity manipulation by various types of cyclodextrins.

The chiral recognition of the centrally acting analgesic agent tapentadol and its isomers with various cyclodextrins (CDs) was studied by capillary electrophoresis, focusing on the migration order of four stereoisomers. In the case of non-charged hydroxypropylated CDs (2-hydroxypropyl-ß-CD, 2-hydroxypropyl-γ-CD) the beta derivative was able to discriminate the S,R- and R,S-isomers in acidic background electrolyte, whereas the gamma allowed the separation of S,S- and R,R-tapentadol, respectively. Dual CD system containing both hosts was used to separate all of four isomers. Negatively charged sulfated-α-CD at 1.0% (w/v) concentration in 100mM sodium borate buffer (pH 9.5) was capable of separating the isomers with favorable enantiomer migration order and the optimized method was able to determine 0.15% of chiral impurities of tapentadol in the presence of the last migrating clinically important R,R-isomer.

Study of behavior of carboxylic magnetite core shell nanoparticles on a pH boundary.

During the last years, several authors have focused on the characterization of the size and charge of the nanoparticles by capillary electrophoresis. However, considering that nanoparticles are generally suspended in a solvent different from those commonly used as background electrolytes (BGE), an appropriate characterization of the behavior of the nanoparticles in the sample-BGE interface is required, as this might affect the overall electrophoretic behavior of the nanoparticles. In the present work, we address the evaluation of the behavior of COOH-coated maghemite nanoparticles in the vicinity of a pH boundary. To do so, different suspensions of nanoparticles prepared in acid media were injected into a borate/NaOH pH 9.5 BGE. The formation and evolution of boundaries in the sample-BGE interface in such systems was modeled by computer simulation. A systematic evaluation of the effect that parameters such as the co-ion, the sample pH or the injection time have on the electrophoretic behavior of the nanoparticles was carried out.

Determination of mushroom toxins ibotenic acid, muscimol and muscarine by capillary electrophoresis coupled with electrospray tandem mass spectrometry.

The CE-ESI-MS/MS method for the identification, separation and determination of mushroom toxins, namely ibotenic acid, muscimol and muscarine, was developed. It proved to be sensitive and thus useful for the real sample analysis with omitting the labor and time consuming pretreatment step. The CE-ESI-MS/MS method was applied on the spiked human urine. The analytical characteristics of the proposed method, such as limits of detection, linearity and repeatability of the peak area and the migration time, were evaluated. The RSD of the migration time and peak area were from 0.93% to 1.60% and from 2.96% to 3.42%, respectively. The obtained LOD values were at the nanomolar concentration level, therefore the developed method is sufficient for the determination and quantification of studied toxins in human urine after mushroom intoxication.

Isopropyl derivative of cyclofructan 6 as chiral selector in liquid chromatography and capillary electrophoresis.

Cyclofructans and preferentially their derivatives can serve as chiral selectors for the separation of different enantiomers/atropisomers. Moreover, the strong ionophoric nature of the 18-crown-6 ether core of cyclofructan 6 for barium cations may be exploited to enhance or modify enantioselectivity. In this work isopropyl-cyclofructan-6 was used as a chiral selector for the separation of binaphthyl atropisomers in HPLC and CE. The data from both separation systems were compared with each other. While in HPLC the chiral selector was bonded to silica gel to afford a chiral stationary phase, in capillary electrophoresis it was freely mobile in the background electrolytes (BGE). This significant difference is reflected in the separation potential of the two separation systems. All five analytes could be baseline separated in HPLC (reversed phase mode) while only one derivative was baseline resolved in CE. This result was attributed to the more rigid nature of the immobilized chiral selector. Addition of Ba(2+) to the mobile phase or BGE improved chiral separations in both systems. The results may help to elucidate the interaction mechanism in these systems with cyclofructan derivatives and to gain some general knowledge of their separation potential.

Analysis of lysozyme in cheese samples by on-line combination of capillary zone electrophoresis and mass spectrometry.

Some methodological aspects of an on-line combination of capillary zone electrophoresis with mass spectrometric detection (CZE-QqQ-MS) were studied in this work as well as the possibilities of using this combination for analysis of the high-molecular mass compounds present in multi-component matrices. All experiments using an on-line combination of capillary electrophoresis with mass spectrometric detection were carried out in cationic mode in covalently-coated capillary. The optimised electrolyte system consisted of 100 mmol/L formic acid. Prior to the CZE-QqQ-MS analysis, an extraction of lysozyme from cheese samples using 1 mol/L of acetic acid was performed. The LOD was 3.6 mg lysozyme per kg and the LOQ was 10.9 mg lysozyme per kg. The concentration range of the lysozyme determined in four cheese samples analysed in this work was from 0.5 to 3.3g of lysozyme per kg. The values of the relative standard deviations thus obtained were from 4.6% to 9.3% depending on the cheese sample.

Enantioseparation of tartaric acid by ligand-exchange capillary electrophoresis using contactless conductivity detection.

A method for the determination of tartaric acid enantiomers using CE with contactless conductivity detection has been developed. Cu(II) as a central metal ion together with L-hydroxyproline were used as a chiral selector, the BGE was composed of 7 mM CuCl2, 14 mM trans-4-hydroxy-L-proline, and 100 mM ε-aminocaproic acid; the pH was adjusted to 5 by hydrochloric acid. Separation with a resolution of 1.9 was achieved in 9 min in a polyacrylamide-coated capillary to suppress the EOF. Various counterions of the BGE were studied, and migration order reversal was achieved when switching from ε-aminocaproic acid to L-histidine. With detection limits of about 20 µM, the method was applied to the analysis of wine and grape samples; only L-tartaric acid was found.

Fast spore breaking by superheating.

Here we present the results of Bacillus subtilis spores breaking using superheating. The spore sample was pumped through the open-ended capillary tube mounted across the heated zone. We investigated the influence of temperature in the range 120-180 °C. The heat exposure was controlled by the length of the heated zone, the inner diameter of the capillary and the sample flow rate. We found that spore treatment above 120 °C resulted in the release of DNA within 20 s.

Enantiomeric separation of R,S-tolterodine and R,S-methoxytolterodine with negatively charged cyclodextrins by capillary electrophoresis.

The methods for separation of R,S-tolterodine and R,S-methoxytolterodine enantiomers using sulfated α-, ß-CD and phosphated-γ-CD by CE in acidic BGE based on Tris/phosphate pH 2.5 buffer were developed. Sulfated α- and ß-CD allow anodic detection while phosphated-γ-CD allows only cathodic detection of the separated enantiomers. The influence of chiral selector (CS)'s concentration as well as the influence of composition and concentration of BGE on resolutions were studied. Reversal migration order of tolterodine and methoxytolterodine enantiomers was observed, when sulfated-α- and sulfated-ß-CD were used. The developed methods with all three studied CSs, were validated and compared. All proposed methods enable determination of 0.2% of S-tolterodine as an optical impurity in pills, however the method with phosphated-γ-CD provided lower detection limit, better repeatability of peak areas and migration times, and also lower consumption of CS. Developed method employing phosphated-γ-CD that was applied for the determination of optical purity of R-tolterodine in commercial pills.

Determination of selected biogenic amines in red wines by automated on-line combination of capillary isotachophoresis-capillary zone electrophoresis.

A screening analytical method based on an automated on-line combination of capillary isotachophoresis-capillary zone electrophoresis (cITP-CZE) in hydrodynamically closed separation system, equipped with photometric detection at 280 nm, was developed for a routine determination of the selected biogenic amines, namely histamine, 2-phenylethylamine and tyramine, in red wines. The evaluated limits of detection (LODs) were 0.35 mg L(-1) for histamine, 0.33 mg L(-1) for 2-phenylethylamine and 0.37 mg L(-1) for tyramine. The repeatability of the migration time and peak area for histamine were 1.1% and 2.6%, respectively, for 2-phenylethylamine 0.7% and 2.0%, respectively, and for tyramine 0.8% and 2.1%, respectively. The method recoveries were 92.1% for histamine, 96.4% for 2-phenylethylamine and 95.5% for tyramine. The developed automated cITP-CZE-UV method was applied for the determination of histamine, 2-phenylethylamine and tyramine in seven red wine samples originating from Czech Republic.

On-line preconcentration of perfluorooctanoic acid and perfluorooctanesulfonic acid by nonaqueous capillary electrophoresis.

Separation of major environmental pollutants as perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) by capillary electrophoresis is reported for the first time. It is not possible to resolve the solutes in an aqueous media. However, the use of methanol and acetonitrile as the background electrolyte (BGE) solvents allowed their rapid separation in an uncoated capillary. A major effort was put into BGE optimization in respect to both separation efficiency and detection for further on-line preconcentration. 5 mmol.L⁻¹ naphthalene-1-sulfonic acid and 10 mmol.L⁻¹ triethylamine dissolved in ACN/MeOH (50:50 v/v) provided best separation and detection conditions. Next, the large-volume sample stacking and the field-amplified sample injection were applied and compared. Large-volume sample stacking improved limits of detection (LODs) with regard to the standard injection by 69 times for PFOA and 143 times for PFOS with LODs of 280 and 230 nmol.L⁻¹, respectively. Field-amplified sample injection improved LODs 624 times for PFOAand 806 times for PFOS with LODs 31 and 40 nmol.L⁻¹, respectively. Both preconcentration methods showed repeatabilities of migration times less than 1.2% RSD intraday and 6.6% RSD interday. The method was applied on PFOA and PFOS analysis in a sample of river water treated with solid-phase extraction, which further improved LOD toward 5.6 × 10⁻¹° mol.L⁻¹ for PFOS and 6.4 × 10⁻¹° mol.L⁻¹ for PFOA and allows the method to be used for river water contamination screening or decomposition studies.

Study on the use of boromycin as a chiral selector in capillary electrophoresis.

The first application of boromycin as a chiral selector in capillary electrophoresis is described. Given boromycin's insolubility in water, a non-aqueous background electrolyte based on methanol was used for enantiomeric discrimination of selected chiral primary amines (α-methylbenzylamine, R,S-tryptophanol, R,S-norepinephrine, R,S-octopamine, R,S-p-hydroxynorephedrine and R,S-2-amino-1-phenylethanol). A basic study of experimental conditions including the influence of boromycin concentration, the composition and concentration of background electrolyte and also the influence of different organic solvents was performed. The best separation condition was 75 mM Tris/50mM boric acid in methanol, pHws 9.0, with a positive separation voltage. The enantiomeric separation of the primary amines was achieved within 14 min with resolution values greater than 1.5 for the majority of the studied analytes.

Determination of rosiglitazone and metformin in human serum by CE-ESI-MS.

A new method for the determination of anti-diabetic drugs metformin and rosiglitazone based on the use of capillary electrophoresis with electrospray mass spectrometry was developed. The proposed method allowed their separation within 11 min by using 50 mM formic acid at +20 kV. Positive electrospray ionization and selected ion monitoring [M+H](+) of metformin (m/z=130) and rosiglitazone (m/z=358) were performed. Several important experimental parameters influencing electrospray ionization of metformin and rosiglitazone were studied. The final composition of sheath liquid was water/methanol/formic acid (50:49.5:0.5, v/v/v), at a flow rate of 2 µL/min. The developed method was applied for the determination of metformin and rosiglitazone simultaneously in human serum after protein precipitation with acetonitrile. The limits of detection of developed method were 4.42 and 2.14 ng/mL for rosiglitazone and for metformin, respectively, which is sufficient for therapeutic serum concentration levels monitoring for both studied drugs.

Preparative isotachophoresis with surface enhanced Raman scattering as a promising tool for clinical samples analysis.

A surface enhanced Raman scattering (SERS) spectrometry is an interesting alternative for a rapid molecular recognition of analytes at very low concentration levels. The hyphenation of this technique with advanced separation methods enhances its potential as a detection technique. Until now, it has been hyphenated mainly with common chromatographic and electrophoretic techniques. This work demonstrates for a first time a power of preparative isotachophoresis-surface enhanced Raman scattering spectrometry (pITP-SERS) combination on the analysis of model analyte (buserelin) in a complex biological sample (urine). An off-line identification of target analyte was performed using a comparison of Raman spectra of buserelin standard with spectra obtained by the analyses of the fractions from preparative isotachophoretic runs. SERS determination of buserelin was based on the method of standard addition to minimize the matrix effects. The linearity of developed method was obtained in the concentration range from 0.2 to 1.5 nmol L(-1) with coefficient of determination 0.991. The calculated limit of detection is in tens of pico mols per liter.

Study of electromigration effects on a pH boundary during the on-line electrokinetic preconcentration by capillary electrophoresis.

A contribution to the description of electrokinetic effects on the pH boundary formed by sodium borate pH 9.5 and sodium phosphate pH 2.5 electrolytes for on-line preconcentration of weak acids is presented in this article. Simulations of electrokinetic injections together with experimental studies using contactless conductivity detection verified that the preconcentration is induced mainly by dissociation changes of analytes on the pH boundary and transient ITP state. Moreover, a study of the addition of organic solvent to the injection electrolyte was performed with impressive results. Subnanomolar LODs of hydroxybenzoic acids were achieved with 80% of methanol in the injection electrolyte which represents more than 70 000-fold preconcentration in comparison with classical CZE method.