Lignin-derived Sustainable Nano-platforms: A Multifunctional Solution for an Efficient Dye Removal.

In contrast to conventional non-biobased adsorbents, lignin emerges as a cost-effective and environmentally benign alternative for water treatment. This study identifies unexpected and unpredicted multifunctional properties of lignin nanoparticles (LNPs). LNPs, which are prepared by simple physical processes, demonstrated for the first time to behave as multifunctional materials able to adsorb and photodegrade methylene blue (MB) in aqueous medium upon UV irradiation. Furthermore, the synthetic approach adopted to synthesize LNPs - and therefore their surface properties - strongly affects their performances. More specifically, LNPs obtained by solvent-antisolvent nanoprecipitation (SLNPs) show the highest MB adsorption properties (98% removal), reaching a maximum adsorption capacity of 43 mg g-1, and the fastest adsorption kinetics with respect to other lignin-based adsorbents. Conversely, hydrotropic LNPs (HLNPs) exhibit exceptional photocatalytic activity, resulting in 98% MB degradation over 6 hours of UV irradiation, combined with the ability to be easily recycled and reused.  The present effort paves the way for the use of LNPs as efficient multifunctional materials able to perform concurrently adsorption and photocatalytic degradation of dye pollutants, toward the creation of a sustainable biobased water treatment platform.

Multifunctional polymer-based nanocomposites for synergistic adsorption and photocatalytic degradation of mixed pollutants in water.

Water pollution is a growing concern for mankind due to its harmful effects on humans, animals and plants. Usually, several pollutants are present in wastewater. For example, dyes and antibiotics are found in wastewater because of their widespread use in factories and hospitals. However, one single technique, e.g. either adsorption or photocatalysis, cannot easily remove more than one kind of pollutant, especially by using one single material in water. For this reason, here multifunctional iron(ii,iii) oxide/poly(N-isopropylacrylamide-co-methacrylic acid)/silver-titanium dioxide (Fe3O4/P(NIPAM-co-MAA)/Ag-TiO2) nanocomposites were used to remove a mixture of pollutants from water. Specifically, three types of experiments were performed to evaluate the adsorption capacity and photodegradation activity of the nanocomposites towards the dye basic fuchsin (BF) and the antibiotic ciprofloxacin (CIP), which were added sequentially to the nanocomposites dispersion or were concurrently present as a mixture. The results demonstrated that the nanocomposites could adsorb BF, and subsequently photodegrade CIP under visible-light irradiation, if BF was the first added pollutant. As well, the nanocomposites could first degrade CIP under visible-light irradiation, and then adsorb BF if they were initially put in contact with CIP. Finally, the ability of adsorbing BF and photodegrading CIP was confirmed in the co-presence of the two pollutants.

Photocatalytic degradation of methylene blue at nanostructured ZnO thin films.

The photocatalytic degradation of the wastewater dye pollutant methylene blue (MB) at ZnO nanostructured porous thin films, deposited by direct current reactive magnetron sputtering on Si substrates, was studied. It was observed that over 4 photocatalytic cycles (0.3 mg · l-1MB solution, 540 minUV irradiation), the rate constantkof MB degradation decreased by ∼50%, varying in the range (1.54 ÷ 0.78) · 10-9(mol·l-1·min-1). For a deeper analysis of the photodegradation mechanism, detailed information on the nanostructured ZnO surface morphology and local surface and subsurface chemistry (nonstoichiometry) were obtained by using scanning electron microscopy (SEM) and x-ray photoelectron spectroscopy (XPS) as complementary analytical methods. The SEM studies revealed that at the surface of the nanostructured ZnO thin films a coral reef structure containing polycrystalline coral dendrites is present, and that, after the photocatalytic experiments, the sizes of individual crystallites increased, varying in the range 43 ÷ 76 nm for the longer axis, and in the range 28 ÷ 58 nm for the shorter axis. In turn, the XPS studies showed a slight non-stoichiometry, mainly defined by the relative [O]/[Zn] concentration of ca. 1.4, whereas [C]/[Zn] was ca. 1.2, both before and after the photocatalytic experiments. This phenomenon was directly related to the presence of superficial ZnO lattice oxygen atoms that can participate in the oxidation of the adsorbed MB molecules, as well as to the presence of surface hydroxyl groups acting as hole-acceptors to produce OH· radicals, which can be responsible for the generation of superoxide ions. In addition, after experiments, the XPS measurements revealed the presence of carboxyl and carbonyl functional groups, ascribable to the oxidation by-products formed during the photodegradation of MB.

Reusable and Antibacterial Polymer-Based Nanocomposites for the Adsorption of Dyes and the Visible-Light-Driven Photocatalytic Degradation of Antibiotics.

Adsorption and advanced oxidation processes, especially photocatalysis, are amongst the most common water treatment methodologies. Unfortunately, using each of these techniques independently does not fully eliminate the pollutants of diverse nature, which are present in wastewater. Here, an avenue for multifunctional materials for water treatment is opened by reporting for the first time the preparation, characterization, and study of the properties of a novel multifunctional nanocomposite with both adsorption and visible-light-driven photocatalysis abilities. These multifunctional nanocomposites, namely iron (II, III) oxide/poly(N-isopropylacrylamide-co-methacrylic acid)/silver-titanium dioxide (Fe3O4/P(NIPAM-co-MAA)/Ag-TiO2), are prepared by combining magnetic polymeric microspheres (Fe3O4/P(NIPAM-co-MAA)) with silver-decorated titanium dioxide nanoparticles (Ag-TiO2 NPs). Cationic dyes, such as basic fuchsin (BF), can be adsorbed by the nanocomposites thanks to the carboxylic groups of Fe3O4/P(NIPAM-co-MAA) microspheres. Concomitantly, the presence of Ag-TiO2 NPs endows the system with the visible-light-driven photocatalytic degradation ability toward antibiotics such as ciprofloxacin (CIP) and norfloxacin (NFX). Furthermore, the proposed nanocomposites show antibacterial activity toward Escherichia coli (E. coli), thanks to the presence of silver nanoparticles (Ag NPs). Due to the superparamagnetic properties of iron (II, III) oxide nanoparticles (Fe3O4 NPs), the nanocomposites can be also recycled and reused, after the cleaning process, by using an external magnetic field.

Lignin-based nano-enabled agriculture: A mini-review.

Nowadays sustainable nanotechnological strategies to improve the efficiency of conventional agricultural practices are of utmost importance. As a matter of fact, the increasing use of productive factors in response to the growing food demand plays an important role in determining the environmental impact of agriculture. In this respect, low-efficiency conventional practices are becoming obsolete. On the other hand, the exploitation of nanoscaled systems for the controlled delivery of fertilizers, pesticides and herbicides shows great potential towards the development of sustainable, efficient and resilient agricultural processes, while promoting food security. In this context, lignin - especially in the form of its nanostructures - can play an important role as sustainable biomaterial for nano-enabled agricultural applications. In this review, we present and discuss the current advancements in the preparation of lignin nanoparticles for the controlled release of pesticides, herbicides, and fertilizers, as well as the latest findings in terms of plant response to their application. Special attention has been paid to the state-of-the-art literature concerning the release performance of these lignin-based nanomaterials, whose efficiency is compared with the conventional approaches. Finally, the major challenges and the future scenarios of lignin-based nano-enabled agriculture are considered.

Synthesis, characterization and photocatalytic properties of nanostructured lanthanide doped ß-NaYF4/TiO2 composite films.

The photocatalytic approach is known to be one of the most promising advanced oxidation processes for the tertiary treatment of polluted water. In this paper, ß-NaYF4/TiO2 composite films have been synthetized through a novel sol-gel/spin-coating approach using a mixture of ß-diketonate complexes of Na and Y, and Yb3+, Tm3+, Gd3+, Eu3+ as doping ions, together with the TiO2 P25 nanoparticles. The herein pioneering approach represents an easy, straightforward and industrially appealing method for the fabrication of doped ß-NaYF4/TiO2 composites. The effect of the doped ß-NaYF4 phase on the photocatalytic activity of TiO2 for the degradation of methylene blue (MB) has been deeply investigated. In particular, the upconverting TiO2/ß-NaYF4: 20%Yb, 2% Gd, x% Tm (x = 0.5 and 1%) and the downshifting TiO2/ß-NaYF4: 10% Eu composite films have been tested on MB degradation both under UV and visible light irradiation. An improvement up to 42.4% in the degradation of MB has been observed for the TiO2/ß-NaYF4: 10% Eu system after 240 min of UV irradiation.

Simple Strategies to Modulate the pH-Responsiveness of Lignosulfonate-Based Delivery Systems.

The extensive use of non-degradable microplastics in a wide plethora of daily life products is causing serious pollution problems. More ecofriendly solutions are therefore urgently needed. In this context, the use of lignin, a largely available aromatic polymer, may represent a viable option. Due to the self-assembly ability of its molecules, lignin is in fact an ideal matrix for the fabrication of nanostructures. In this study, lignosulfonate microcapsules containing a limonene core were prepared and characterized in terms of their dimensions and of the physicochemical characteristics of the capsule-forming lignosulfonate molecules. The main purpose is to elucidate the key properties governing the pH-responsive behavior of the capsules to be able to achieve better control over the release kinetics of the entrapped compound(s). The results demonstrate that both the molecular weight and the concentration of sulfonate groups are the most important factors in this respect. Based on these findings, two strategies were followed to further tailor the capsules' behavior: (i) fractionation of the starting lignosulfonate by solvent extraction and (ii) introduction of a specific additive in the formulation. The first approach permitted to fabricate highly resistant capsules both in acidic, as well as in alkaline conditions, while in the second case the chemical structure of the additive, the diester diveratryl sebacate, allowed for fast kinetics of release, as values above 70% were reached after 24 h of incubation at pH 4 and pH 12.

Thermoelectric Energy Harvesting from Single-Walled Carbon Nanotube Alkali-Activated Nanocomposites Produced from Industrial Waste Materials.

A waste-originated one-part alkali-activated nanocomposite is introduced herein as a novel thermoelectric material. For this purpose, single-walled carbon nanotubes (SWCNTs) were utilized as nanoinclusions to create an electrically conductive network within the investigated alkali-activated construction material. Thermoelectric and microstructure characteristics of SWCNT-alkali-activated nanocomposites were assessed after 28 days. Nanocomposites with 1.0 wt.% SWCNTs exhibited a multifunctional behavior, a combination of structural load-bearing, electrical conductivity, and thermoelectric response. These nanocomposites (1.0 wt.%) achieved the highest thermoelectric performance in terms of power factor (PF), compared to the lower SWCNTs' incorporations, namely 0.1 and 0.5 wt.%. The measured electrical conductivity (σ) and Seebeck coefficient (S) were 1660 S·m-1 and 15.8 µV·K-1, respectively, which led to a power factor of 0.414 µW·m-1·K-2. Consequently, they have been utilized as the building block of a thermoelectric generator (TEG) device, which demonstrated a maximum power output (Pout) of 0.695 µW, with a power density (PD) of 372 nW·m-2, upon exposure to a temperature gradient of 60 K. The presented SWCNT-alkali-activated nanocomposites could establish the pathway towards waste thermal energy harvesting and future sustainable civil engineering structures.

Enhanced visible-light photodegradation of fluoroquinolone-based antibiotics and E. coli growth inhibition using Ag-TiO2 nanoparticles.

Antibiotics in wastewater represent a growing and worrying menace for environmental and human health fostering the spread of antimicrobial resistance. Titanium dioxide (TiO2) is a well-studied and well-performing photocatalyst for wastewater treatment. However, it presents drawbacks linked with the high energy needed for its activation and the fast electron-hole pair recombination. In this work, TiO2 nanoparticles were decorated with Ag nanoparticles by a facile photochemical reduction method to obtain an increased photocatalytic response under visible light. Although similar materials have been reported, we advanced this field by performing a study of the photocatalytic mechanism for Ag-TiO2 nanoparticles (Ag-TiO2 NPs) under visible light taking in consideration also the rutile phase of the TiO2 nanoparticles. Moreover, we examined the Ag-TiO2 NPs photocatalytic performance against two antibiotics from the same family. The obtained Ag-TiO2 NPs were fully characterised. The results showed that Ag NPs (average size: 23.9 ± 18.3 nm) were homogeneously dispersed on the TiO2 surface and the photo-response of the Ag-TiO2 NPs was greatly enhanced in the visible light region when compared to TiO2 P25. Hence, the obtained Ag-TiO2 NPs showed excellent photocatalytic degradation efficiency towards the two fluoroquinolone-based antibiotics ciprofloxacin (92%) and norfloxacin (94%) after 240 min of visible light irradiation, demonstrating a possible application of these particles in wastewater treatment. In addition, it was also proved that, after five Ag-TiO2 NPs re-utilisations in consecutive ciprofloxacin photodegradation reactions, only a photocatalytic efficiency drop of 8% was observed. Scavengers experiments demonstrated that the photocatalytic mechanism of ciprofloxacin degradation in the presence of Ag-TiO2 NPs is mainly driven by holes and ˙OH radicals, and that the rutile phase in the system plays a crucial role. Finally, Ag-TiO2 NPs showed also antibacterial activity towards Escherichia coli (E. coli) opening the avenue for a possible use of this material in hospital wastewater treatment.

Towards Utilising Photocrosslinking of Polydiacetylenes for the Preparation of "Stealth" Upconverting Nanoparticles.

We demonstrate a novel strategy for preparing hydrophilic upconverting nanoparticles (UCNPs) by harnessing the photocrosslinking ability of diacetylenes. Replacement of the hydrophobic oleate coating on the UCNPs with 10,12-pentacosadiynoic acid, followed by overcoating with diacetylene phospholipid and subsequent photocrosslinking under 254 nm irradiation produces water-dispersible polydiacetylene-coated UCNPs. These UCNPs resist the formation of a biomolecular corona and show great colloidal stability. Furthermore, amine groups on the diacetylene phospholipid allow for functionalisation of the UCNPs with, for example, radiolabels or targeting moieties. These results demonstrate that this new surface-coating method has great potential for use in the preparation of UCNPs with improved biocompatibility.

Facile preparation of multifunctionalisable 'stealth' upconverting nanoparticles for biomedical applications.

Pure hexagonal (ß-phase) NaYF4-based hydrophobic upconverting nanoparticles (UCNPs) were surface-modified with O-phospho-l-threonine (OPLT), alendronic acid, and PEG-phosphate ligands to generate water-dispersible UCNPs. Fourier-transform infrared (FTIR) spectroscopy was used to establish the presence of the ligands on the UCNP surface. These UCNPs exhibit great colloidal stability and a near-neutral surface at physiological pH, as confirmed by dynamic light scattering (DLS) and zeta potential (ζ) measurements, respectively. The particles also display excellent long-term stability, with no major adverse effect on the size of UCNPs when kept at pH 7.4. Upon exposure to human serum, PEG-phosphate- and alendronate-coated UCNPs showed no formation of biomolecular corona, as confirmed by SDS-PAGE analysis. The photophysical properties of water-dispersible UCNPs were investigated using steady-state as well as time-resolved luminescence spectroscopy, under excitation at ca. 800 nm. The results clearly show that the UCNPs demonstrate bright upconversion (UC) luminescence. Furthermore, the presence of reactive groups on the NPs, such as free amine groups in alendronate-coated UCNPs, enables further functionalisation of UCNPs with, for example, small molecules, peptides, proteins, and antibodies. Overall these protein corona resistant UCNPs show great biocompatibility and are worthy of further investigation as potential new biomaging probes.

Rapid Synthesis of Sub-10†nm Hexagonal NaYF4-Based Upconverting Nanoparticles using Therminol®â€ 66.

We report a simple one-pot method for the rapid preparation of sub-10 nm pure hexagonal (ß-phase) NaYF4-based upconverting nanoparticles (UCNPs). Using Therminol®â€…66 as a co-solvent, monodisperse UCNPs could be obtained in unusually short reaction times. By varying the reaction time and reaction temperature, it was possible to control precisely the particle size and crystalline phase of the UCNPs. The upconversion (UC) luminescence properties of the nanocrystals were tuned by varying the concentrations of the dopants (Nd3+ and Yb3+ sensitizer ions and Er3+ activator ions). The size and phase-purity of the as-synthesized core and core-shell nanocrystals were assessed by using complementary transmission electron microscopy, dynamic light scattering, X-ray diffraction, and small-angle X-ray scattering studies. In-depth photophysical evaluation of the UCNPs was pursued by using steady-state and time-resolved luminescence spectroscopy. An enhancement in the UC intensity was observed if the nanocrystals, doped with optimized concentrations of lanthanide sensitizer/activator ions, were further coated with an inert/active shell. This was attributed to the suppression of surface-related luminescence quenching effects.

Synthesis of a highly Mg2+-selective fluorescent probe and its application to quantifying and imaging total intracellular magnesium.

Magnesium plays a crucial role in many physiological functions and pathological states. Therefore, the evolution of specific and sensitive tools capable of detecting and quantifying this element in cells is a very desirable goal in biological and biomedical research. We developed a Mg2+-selective fluorescent dye that can be used to selectively detect and quantify the total magnesium pool in a number of cells that is two orders of magnitude smaller than that required by flame atomic absorption spectroscopy (F-AAS), the reference analytical method for the assessment of cellular total metal content. This protocol reports itemized steps for the synthesis of the fluorescent dye based on diaza-18-crown-6-hydroxyquinoline (DCHQ5). We also describe its application in the quantification of total intracellular magnesium in mammalian cells and the detection of this ion in vivo by confocal microscopy. The use of in vivo confocal microscopy enables the quantification of magnesium in different cellular compartments. As an example of the sensitivity of DCHQ5, we studied the involvement of Mg2+ in multidrug resistance in human colon adenocarcinoma cells sensitive (LoVo-S) and resistant (LoVo-R) to doxorubicin, and found that the concentration was higher in LoVo-R cells. The time frame for DCHQ5 synthesis is 1-2 d, whereas the use of this dye for total intracellular magnesium quantification takes 2.5 h and for ion bioimaging it takes 1-2 h.

A fluorescent ratiometric nanosized system for the determination of Pd(II) in water.

The fluorescent ligand (L) based on the N2S2 pyridinophane macrocycle and the 7-nitrobenzo[1,2,5]oxadiazole (NBD) fluorogenic fragment has been synthesized to coordinate Pd(II) ions. Loaded on dye-doped silica nanoparticles, L can be used as a ratiometric fluorescent chemosensor for Pd(II) in water with high selectivity toward other metal ions including the platinum group ones.

Cancer-cell-targeted theranostic cubosomes.

This work was devoted to the development of a new type of lipid-based (cubosome) theranostic nanoparticle able to simultaneously host camptothecin, a potent anticancer drug, and a squarain-based NIR-emitting fluorescent probe. Furthermore, to confer targeting abilities on these nanoparticles, they were dispersed using mixtures of Pluronic F108 and folate-conjugated Pluronic F108 in appropriate ratios. The physicochemical characterization, performed via SAXS, DLS, and cryo-TEM techniques, proved that aqueous dispersions of such cubosomes can be effectively prepared, while the photophysical characterization demonstrated that these nanoparticles may be used for in vivo imaging purposes. The superior ability of these innovative nanoparticles in targeting cancer cells was emphasized by investigating the lipid droplet alterations induced in HeLa cells upon exposure to targeted and nontargeted cubosomes.

A novel fluorescent chemosensor allows the assessment of intracellular total magnesium in small samples.

The present study investigated the analytical capabilities of a new fluorescent chemosensor, named DCHQ5, a phenyl derivative belonging to the family of diaza-crown-hydroxyquinolines, for the quantitative assessment of total intracellular Mg content. The results obtained were compared to the analytical performances of DCHQ1 - the parent probe of the series which so far was the only suitable species for the quantitative assessment of the intracellular total magnesium and showed comparable results to atomic absorption spectroscopy. Different protocols were tested in several cell lines both by flow cytometry and by steady state fluorescence spectroscopy assays. The results obtained support the possibility to use DCHQ5 to accurately quantify the intracellular total Mg in much smaller samples than DCHQ1, also displaying an increased stable intracellular staining. These features, combined with the high fluorescence enhancement upon cation binding, and the possibility to be excited both in the UV and visible region, make DCHQ5 a valuable and versatile analytical tool for Mg assessment in biological samples.

A quest for supramolecular gelators: silver(I) complexes with quinoline-urea derivatives.

The quinoline urea derivatives 1,3-di(quinolin-5-yl)urea (DQ5U), 1-phenyl-3-(quinolin-6-yl)urea (PQ6U), 1-(isoquinolin-5-yl)-3-phenylurea (PiQ5U) and 1-phenyl-3-(3,5-bis(pyrid-2-yl)-1,2,4-triazol-4-yl)urea (PPT4U) have been synthesised and structurally characterized by powder and single crystal X-ray diffraction. Their gelator behaviour in the formation of Ag-complexes has been explored. Compound DQ5U proved capable of gelating the mixed solvent EtOH-DMF 1 : 2 (v/v) when mixed with 1 equivalent of AgNO3. In the case of PQ6U, two polymorphic forms of the complex [Ag(PQ6U)2]NO3, plus the solvated form [Ag(PQ6U)2]NO3·CH3CN, were crystallized. Photophysical characterization of the ligands has been conducted in solution, while fluorescence microscopy has been used to examine the microstructure and photophysical properties of the gels formed by PQ5U and DQ5U with AgNO3.

Multimodal use of new coumarin-based fluorescent chemosensors: towards highly selective optical sensors for Hg(2+) probing.

Despite several types of fluorescent sensing molecules have been proposed and examined to signal Hg(2+) ion binding, the development of fluorescence-based devices for in-field Hg(2+) detection and screening in environmental and industrial samples is still a challenging task. Herein, we report the synthesis and characterization of three new coumarin-based fluorescent chemosensors featuring mixed thia/aza macrocyclic framework as receptors units, that is, ligands L1-L3. These probes revealed an OFF-ON selective response to the presence of Hg(2+) ions in MeCN/H2 O 4:1 (v/v), which allowed imaging of this metal ion in Cos-7 cells in vitro. Once included in silica core-polyethylene glycol (PEG) shell nanoparticles or supported on polyvinyl chloride (PVC)-based polymeric membranes, ligands L1-L3 can also selectively sense Hg(2+) ions in pure water. In particular we have developed an optical sensing array tacking advantage of the fluorescent properties of ligand L3 and based on the computer screen photo assisted technique (CSPT). In the device ligand L3 is dispersed into PVC membranes and it quantitatively responds to Hg(2+) ions in natural water samples.

Luminescent chemosensors based on silica nanoparticles.

The field of nanoparticles is amazingly many-sided and consequently their applications range between many different areas from industry to bio-analysis and catalysis. In particular, luminescent nanoparticles attract close attention in the areas of biology, medical diagnosis and therapy, where they already find many applications. In this so fascinating and wide framework we have focussed our attention on luminescent silica nanoparticles able to act as sensing materials. We highlight here the importance, especially with the aim of sensing, of gaining precise knowledge and control of their structures; the performance of a chemosensor is, in fact, totally dependent on its design. We then briefly present the state of the art and the progress both in the synthetic protocols and in the application of luminescent silica nanoparticles as chemosensors. We present many recent examples, organized into two main sections, the first dealing with systems presenting the signalling units on the surface (dye coated silica nanoparticles, DCSNs) and the second with systems entrapping the dyes inside the silica matrix (dye doped silica nanoparticles, DDSNs).