Design and Evaluation of Two-Step Biorelevant Dissolution Methods for Docetaxel Oral Formulations.

Dissolution is a pivotal tool for oral formulations. Dissolution could be used to either reduce the risk of product failure through quality control or predict and understand in vivo performance of drug formulations. The latter is always challenging because multiple factors such as selection of media, gastrointestinal components, physiological factors, consideration of fasted and fed state are involved. Previously published dissolution methods such as one-step dissolution in individual simulated gastric fluid, simulated intestinal fluid, or phosphate buffer saline did not signify the realistic gastrointestinal transit effect. Docetaxel (DTX), a poorly water-soluble drug, is commercially available only as injectable dosage forms, and thus many publications studied the development of oral DTX formulations. In our previous report, we developed oral lipid-based DTX granules that showed higher oral absorption in rats compared to DTX powder. However, one-step dissolution in simulated gastric fluid showed no difference between DTX granules and DTX powder. Therefore, the present study aimed to develop new two-step biorelevant dissolution methods for DTX oral formulations. In the study, new two-step biorelevant dissolution methods in fasted or fed states with pancreatin were developed and compared with other previously reported dissolution methods. The new two-step biorelevant dissolution methods successfully discriminated the difference of dissolution between DTX granules and DTX powder, which reflected the in vivo difference of absorption of these two formulations. Moreover, food effects were confirmed for DTX. The new dissolution methods have the potential to be used to predict and understand in vivo performance of oral solid dosage forms.

Current Status of In vitro Models of the Blood-brain Barrier.

Disorders of the brain constitute the most debilitating situation globally with increased mortality rates every year, while brain physiology and cumbersome drug development processes exacerbate this. Although blood-brain barrier (BBB) and its components are important for brain protection, their complexity creates major obstacles for brain drug delivery, and the BBB is the primary cause of treatment failure, leading to disease progression. Therefore, developing an ideal platform that can predict the behavior of a drug delivery system in the brain at the early development phase is extremely crucial. In this direction, in the last two decades, numerous in vitro BBB models have been developed and investigated by researchers to understand the barrier properties and how closely the in vitro models mimic in vivo BBB. In-vitro BBB models mainly involve the culture of endothelial cells or their coculture with other perivascular cells either in two or three-dimensional platforms. In this article, we have briefly summarized the fundamentals of BBB and outlined different types of in vitro BBB models with their pros and cons. Based on the available reports, no model seems to be robust that can truly mimic the entire properties of the in vivo BBB microvasculature. However, human stem cells, coculture and threedimensional models have been found to mimic the complexity of the barrier integrity not completely but more precisely than other in vitro models. More studies aiming towards combining these models together would be needed to develop an ideal in vitro model that can overcome the existing limitations and unravel the mysterious BBB vasculature.

Natural proteins and polysaccharides in the development of micro/nano delivery systems for the treatment of inflammatory bowel disease.

Treatments for inflammatory bowel disease (IBD) are typically immunosuppressive. Despite a range of treatment options, limited efficacy, systemic toxicities like bone marrow suppression, infections and malignancy are their serious setbacks. There exists an unmet medical need for novel therapeutic agents without safety concerns resulting from chronic, systemic immunosuppression. Of late, several natural agents with better therapeutic potential have been reported. It is very likely that restricting the release of the active molecules to the intestine would further improve their clinical efficacy and safety. To this end, novel polymer-based micro/nano formulations protect the drug from gastric environment and slowly release the drug in the colon. However, cost and side-effects associated to synthetic polymers have led to the development of biocompatible, economic and pharmaceutically well-accepted biomacromolecules in exploring their potential in IBD. Since last few years, biological proteins, polysaccharides and their combinations have shown great efficacy in colitis induced animal models. In this review, micro/nano formulations developed using biomacromolecules like chitosan, zein, pectin, casein, alginate, dextran, glucomannan and hyaluronic acid have been reviewed focusing on their potential in protecting active cargo, avoiding premature release, distal colon targeting along with their impact on reshaping the altered gut microbiota and how it can ameliorate the colitis conditions.

Natural Product-Based Nanomedicine in Treatment of Inflammatory Bowel Disease.

: Many synthetic drugs and monoclonal antibodies are currently in use to treat Inflammatory Bowel Disease (IBD). However, they all are implicated in causing severe side effects and long-term use results in many complications. Numerous in vitro and in vivo experiments demonstrate that phytochemicals and natural macromolecules from plants and animals reduce IBD-related complications with encouraging results. Additionally, many of them modify enzymatic activity, alleviate oxidative stress, and downregulate pro-inflammatory transcriptional factors and cytokine secretion. Translational significance of natural nanomedicine and strategies to investigate future natural product-based nanomedicine is discussed. Our focus in this review is to summarize the use of phytochemicals and macromolecules encapsulated in nanoparticles for the treatment of IBD and IBD-associated colorectal cancer.

Formulation and In-vivo Pharmacokinetic Consideration of Intranasal Microemulsion and Mucoadhesive Microemulsion of Rivastigmine for Brain Targeting.

PURPOSE: Presence of tight junctions in blood brain barrier (BBB) pose a major hurdle for delivery of drug and severely affects adequate therapeutic concentration to reach the brain. In present work, we have selected Rivastigmine hydrogen tartrate (RHT), a reversible cholinesterase inhibitor, which exhibits extensive first-pass metabolism, resulting in limited absolute bioavailability (36%). RHT shows extremely low aqueous solubility and poor penetration, resulting in inadequate concentration reaching the brain, thus necessitating frequent oral dosing. To overcome these problems of RHT, microemulsion (ME) and mucoadhesive microemulsion (MME) of RHT were formulated for brain targeting via intranasal delivery route and compared on the basis of in vivo pharmacokinetics. METHODS: ME and MME formulations containing RHT were developed by water titration method. Characterization of ME and MME was done for various physicochemical parameters, nasal spray pattern, and in vivo pharmacokinetics quantitatively and qualitatively (gamma scintigraphy studies). RESULTS: The developed ME and MME were transparent having globule size approximately in the range of 53-55 nm. Pharmacokinetic studies showed higher values for Cmax and DTP for intranasal RHT: CH-ME over RHT-ME, thus indicating the effect of chitosan in modulating tight junctions, thereby enhanced paracellular transport of RHT. CONCLUSION: Gamma scintigraphy and in vivo pharmacokinetic study suggested enhanced RHT concentration, upon intranasal administration of RHT:CH-ME, compare with other groups administered formulations intranasally. These findings suggested the potential of non-invasive intranasal route for brain delivery, especially for therapeutics, facing challenges in oral administration.

"Application of Box-Behnken design for optimization and development of quetiapine fumarate loaded chitosan nanoparticles for brain delivery via intranasal route* ".

The objective of the present investigation was to optimize and develop quetiapine fumarate (QF) loaded chitosan nanoparticles (QF-NP) by ionic gelation method using Box-Behnken design. Three independent variables viz., X1-Concentration of chitosan, X2-Concentration of sodium tripolyphosphate and X3-Volume of sodium tripolyphosphate were taken to investigate their effect on dependent variables (Y1-Size, Y2-PDI and Y3-%EE). Optimized formula of QF-NP was selected from the design space which was further evaluated for physicochemical, morphological, solid state characterization, nasal diffusion and in-vivo distribution for brain targeting following non-invasive intranasal administration. The average particle size, PDI, %EE and nasal diffusion were found to be 131.08±7.45nm, 0.252±0.064, 89.93±3.85% and 65.24±5.26% respectively. Neither toxicity nor structural damage on nasal mucosa was observed upon histopathological examination. Significantly higher brain/blood ratio and 2 folds higher nasal bioavailability in brain with QF-NP in comparison to drug solution following intranasal administration revealed preferential nose to brain transport bypassing blood-brain barrier and prolonged retention of QF at site of action suggesting superiority of chitosan as permeability enhancer. Overall, the above finding shows promising results in the area of developing non-invasive intranasal route as an alternative to oral route for brain delivery.

Non-invasive intranasal delivery of quetiapine fumarate loaded microemulsion for brain targeting: Formulation, physicochemical and pharmacokinetic consideration.

Systemic drug delivery in schizophrenia is a major challenge due to presence of obstacles like, blood-brain barrier and P-glycoprotein, which prohibit entry of drugs into the brain. Quetiapine fumarate (QF), a substrate to P-glycoprotein under goes extensive first pass metabolism leading to limited absorption thus necessitating frequent oral administration. The aim of this study was to develop QF based microemulsion (ME) with and without chitosan (CH) to investigate its potential use in improving the bioavailability and brain targeting efficiency following non-invasive intranasal administration. QF loaded ME and mucoadhesive ME (MME) showed globule size, pH and viscosity in the range of 29-47nm, 5.5-6.5 and 17-40cP respectively. CH-ME with spherical globules having mean size of 35.31±1.71nm, pH value of 5.61±0.16 showed highest ex-vivo nasal diffusion (78.26±3.29%) in 8h with no sign of structural damage upon histopathological examination. Circular plume with an ovality ratio closer to 1.3 for CH-ME depicted ideal spray pattern. Significantly higher brain/blood ratio of CH-ME in comparison to QF-ME and drug solution following intranasal administration revealed prolonged retention of QF at site of action suggesting superiority of CH as permeability enhancer. Following intranasal administration, 2.7 and 3.8 folds higher nasal bioavailability in brain with CH-ME compared to QF-ME and drug solution respectively is indicative of preferential nose to brain transport (80.51±6.46%) bypassing blood-brain barrier. Overall, the above finding shows promising results in the area of developing non-invasive intranasal route as an alternative to oral route for brain delivery.

Application of quality by design approach for intranasal delivery of rivastigmine loaded solid lipid nanoparticles: Effect on formulation and characterization parameters.

In the present investigation, Quality by Design (QbD) approach was applied on the development and optimization of solid lipid nanoparticle (SLN) formulation of hydrophilic drug rivastigmine (RHT). RHT SLN were formulated by homogenization and ultrasonication method using Compritol 888 ATO, tween-80 and poloxamer-188 as lipid, surfactant and stabilizer respectively. The effect of independent variables (X1 - drug: lipid ratio, X2 - surfactant concentration and X3 - homogenization time) on quality attributes of SLN i.e. dependent variables (Y1 - size, Y2 - PDI and Y3 - %entrapment efficiency (%EE)) were investigated using 3(3) factorial design. Multiple linear regression analysis and ANOVA were employed to indentify and estimate the main effect, 2FI, quadratic and cubic effect. Optimized RHT SLN formula was derived from an overlay plot on which further effect of probe sonication was evaluated. Final RHT SLN showed narrow size distribution (PDI- 0.132±0.016) with particle size of 82.5±4.07 nm and %EE of 66.84±2.49. DSC and XRD study showed incorporation of RHT into imperfect crystal lattice of Compritol 888 ATO. In comparison to RHT solution, RHT SLN showed higher in-vitro and ex-vivo diffusion. The diffusion followed Higuchi model indicating drug diffusion from the lipid matrix due to erosion. Histopathology study showed intact nasal mucosa with RHT SLN indicating safety of RHT SLN for intranasal administration.

Nose to brain microemulsion-based drug delivery system of rivastigmine: formulation and ex-vivo characterization.

Alzheimer's disease (AD) is a progressive neurodegenerative disorder leading to irreversible loss of neurons, cognition and formation of abnormal protein aggregates. Rivastigmine, a reversible cholinesterase inhibitor used for the treatment of AD, undergoes extensive first-pass metabolism, thus limiting its absolute bioavailability to only 36% after 3-mg dose. Due to extreme aqueous solubility, rivastigmine shows poor penetration and lesser concentration in the brain thus requiring frequent oral dosing. This investigation was aimed to formulate microemulsion (ME) and mucoadhesive microemulsions (MMEs) of rivastigmine for nose to brain delivery and to compare percentage drug diffused for both systems using in-vitro and ex-vivo study. Rivastigmine-loaded ME and MMEs were prepared by titration method and characterized for drug content, globule size distribution, zeta potential, pH, viscosity and nasal ciliotoxicity study. Rivastigmine-loaded ME system containing 8% w/w Capmul MCM EP, 44% w/w Labrasol:Transcutol-P (1:1) and 48% w/w distilled water was formulated, whereas 0.3% w/w chitosan (CH) and cetyl trimethyl ammonium bromide (as mucoadhesive agents) were used to formulate MMEs, respectively. ME and MMEs formulations were transparent with drug content, globule size and zeta potential in the range of 98.59% to 99.43%, 53.8 nm to 55.4 nm and -2.73 mV to 6.52 mV, respectively. MME containing 0.3% w/w CH followed Higuchi model (r(2) = 0.9773) and showed highest diffusion coefficient. It was free from nasal ciliotoxicity and stable for three months. However, the potential of developed CH-based MME for nose to brain delivery of rivastigmine can only be established after in-vivo and biodistribution study.

Synthesis and characterization of a novel hybrid material as amphoteric ion exchanger for simultaneous removal of cations and anions.

A new hybrid chelating ion exchanger zirconium diethylene triamine (ZrD) has been synthesized by a simple sol-gel route using inexpensive and easily available chemicals. ZrD has been characterized for elemental analysis (ICP-AES, CHN analysis), TGA, FTIR, X-ray diffraction, SEM and EDX. Physical and ion exchange characteristics as well as chemical stability of the material in various media have been studied. Structural determination reveals that ZrD exhibits amphoteric character. Anion exchange capacity (AEC) for Cl(-), Br(-), Cr2O7(2-), F(-) and AsO4(3-) has been determined. Cations are exchanged through chelation where coordinating sites are offered by nitrogen atoms present in the amine groups of ZrD. Distribution coefficient Kd for Co(2+), Ni(2+), Cu(2+), Zn(2+) (transition metal ions) and Hg(2+), Cd(2+), Pb(2+) (heavy metal ions) has been evaluated by batch equilibration techniques in aqueous and various electrolyte media/concentrations. Based on α the separation factor, a few binary separations have been performed on a chromatographic column packed with ZrD. The amphoteric behaviour of ZrD has been demonstrated by simultaneous exchange of Cu(2+) and Cl(-) in CuCl2. A study on the regeneration and reuse of ZrD indicates that it is effective upto four cycles without much decline in performance.