Topical drug delivery by Sepineo P600 emulgel: Relationship between rheology, physical stability, and formulation performance.

The objective of this present work was to develop and optimize oil-in-water (O/W) emulsion-based gels, namely emulgels that allow maximum topical drug delivery while having desired microstructure and acceptable physical stability. Emulgels containing 2.0 wt% lidocaine were prepared using various concentrations (0.75-5.0 wt%) of Sepineo P600. Their droplet size distribution, physical stability, rheological behaviors, in vitro drug release, and skin permeation profiles were evaluated. Results show that the concentration of Sepineo P600 significantly influenced the microstructure, rheology, and physical stability of the emulgel formulations. The physico-chemical properties also reveals that at least 1.0 wt% Sepineo P600 was needed to produce stable emulgel formulations. All formulations exhibited non-Newtonian shear-thinning properties which are desirable for topical applications. Both the release and permeation rates decreased with increasing viscosity and rigidity of the formulation. The lower the complex modulus of the emulgels, the higher the steady-state flux of the drug through the skin. Adding Sepineo P600 to emulgel systems resulted in increased rheological properties, which in turn slowed the diffusion of the drug for in vitro release. Although as expected skin permeation was rate limiting since in vitro release was 3 to 4 log-fold faster than skin flux. However, an interesting finding was that the derived skin/vehicle partition coefficient suggested the ionic interaction between lidocaine and Sepineo polymer reducing the free drug, i.e., thermodynamic activity and hence the flux with increasing Sepineo P600 concentration. Overall, this study has provided us with valuable insights into understanding the relationship between the microstructure (rheology), physical stability and skin drug delivery properties which will help to design and optimize topical emulgel formulations.

Sustainable Alternatives to Petroleum-Derived Excipients in Pharmaceutical Oil-in-Water Creams.

Recently, vast efforts towards sustainability have been made in the pharmaceutical industry. In conventional oil-in-water (O/W) cream formulations, various petroleum-based excipients, namely mineral oil and petrolatum, are commonly used. Natural or synthetic excipients, derived from vegetable sources, were explored as alternatives to petroleum-based excipients in prototype topical creams, with 1% (w/w) lidocaine. A conventional cream comprised of petroleum-derived excipients was compared to creams containing sustainable excipients in terms of key quality and performance attributes, physicochemical properties, and formulation performance. The petrolatum-based control formulation had the highest viscosity of 248.0 Pa·s, a melting point of 42.7°C, a low separation index at 25°C of 0.031, and an IVRT flux of 52.9 µg/cm2/h. Formulation SUS-4 was the least viscous formulation at 86.9 Pa·s, had the lowest melting point of 33.6°C, the highest separation index of 0.120, and the highest IVRT flux of 139.4 µg/cm2/h. Alternatively, SUS-5 had a higher viscosity of 131.3 Pa·s, a melting point of 43.6°C, a low separation index of 0.046, and the lowest IVRT flux of 25.2 µg/cm2/h. The cumulative drug permeation after 12 h from SUS-4, SUS-5, and the control were 126.2 µg/cm2, 113.8 µg/cm2, and 108.1 µg/cm2, respectively. The composition of the oil-in-water creams had influence on physicochemical properties and drug release; however, skin permeation was not impacted. Sustainable natural or synthetic excipients in topical cream formulations were found to be suitable alternatives to petroleum-based excipients with comparable key quality attributes and performance attributes and should be considered during formulation development.

Safety, Pharmacokinetics, and Efficacy Signals of Larsucosterol (DUR-928) in Alcohol-Associated Hepatitis.

INTRODUCTION: This study is to evaluate the safety and pharmacokinetics (PK) of larsucosterol (DUR-928 or 25HC3S) in subjects with alcohol-associated hepatitis (AH), a devastating acute illness without US Food and Drug Administration-approved therapies. METHODS: This phase 2a, multicenter, open-label, dose escalation study evaluated the safety, PK, and efficacy signals of larsucosterol in 19 clinically diagnosed subjects with AH. Based on the model for end-stage liver disease (MELD) score, 7 subjects were considered to have moderate AH and 12 to have severe AH. All subjects received 1 or 2 intravenous infusions (72 hours apart) of larsucosterol at a dose of 30, 90, or 150 mg and were followed up for 28 days. Efficacy signals from a subgroup of subjects with severe AH were compared with those from 2 matched arms of those with severe AH treated with standard of care (SOC), including corticosteroids, from a contemporaneous study. RESULTS: All 19 larsucosterol-treated subjects survived the 28-day study. Fourteen (74%) of all subjects including 8 (67%) of the subjects with severe AH were discharged ≤72 hours after receiving a single infusion. There were no drug-related serious adverse events nor early terminations due to the treatment. PK profiles were not affected by disease severity. Biochemical parameters improved in most subjects. Serum bilirubin levels declined notably from baseline to day 7 and day 28, and MELD scores were reduced at day 28. The efficacy signals compared favorably with those from 2 matched groups treated with SOC. Lille scores at day 7 were <0.45 in 16 of the 18 (89%) subjects with day 7 samples. Lille scores from 8 subjects with severe AH who received 30 or 90 mg larsucosterol (doses used in phase 2b trial) were statistically significantly lower ( P < 0.01) than those from subjects with severe AH treated with SOC from the contemporaneous study. DISCUSSION: Larsucosterol was well tolerated at all 3 doses in subjects with AH without safety concerns. Data from this pilot study showed promising efficacy signals in subjects with AH. Larsucosterol is being evaluated in a phase 2b multicenter, randomized, double-blinded, placebo-controlled (AHFIRM) trial.

Comparative Study of Dermal Pharmacokinetics Between Topical Drugs Using Open Flow Microperfusion in a Pig Model.

PURPOSE: Accurate methods to determine dermal pharmacokinetics are important to increase the rate of clinical success in topical drug development. We investigated in an in vivo pig model whether the unbound drug concentration in the interstitial fluid as determined by dermal open flow microperfusion (dOFM) is a more reliable measure of dermal exposure compared to dermal biopsies for seven prescription or investigational drugs. In addition, we verified standard dOFM measurement using a recirculation approach and compared dosing frequencies (QD versus BID) and dose strengths (high versus low drug concentrations). METHODS: Domestic pigs were topically administered seven different drugs twice daily in two studies. On day 7, drug exposures in the dermis were assessed in two ways: (1) dOFM provided the total and unbound drug concentrations in dermal interstitial fluid, and (2) clean punch biopsies after heat separation provided the total concentrations in the upper and lower dermis. RESULTS: dOFM showed sufficient intra-study precision to distinguish interstitial fluid concentrations between different drugs, dose frequencies and dose strengths, and had good reproducibility between studies. Biopsy concentrations showed much higher and more variable values. Standard dOFM measurements were consistent with values obtained with the recirculation approach. CONCLUSIONS: dOFM pig model is a robust and reproducible method to directly determine topical drug concentration in dermal interstitial fluid. Dermal biopsies were a less reliable measure of dermal exposure due to possible contributions from drug bound to tissue and drug associated with skin appendages.

Influence of Manufacturing Process on the Microstructure, Stability, and Sensorial Properties of a Topical Ointment Formulation.

The manufacturing process for ointments typically involves a series of heating, cooling, and mixing steps. Precise control of the level of mixing through homogenization and the cooling rate, as well as temperature at different stages, is important in delivering ointments with the desired quality attributes, stability, and performance. In this work, we investigated the influence of typical plant processing conditions on the microstructure, stability, and sensorial properties of a model ointment system through a Design of Experiments (DoE) approach. Homogenization speed at the cooling stage after the addition of the solvent (propylene glycol, PG) was found to be the critical processing parameter that affects stability and the rheological and sensorial properties of the ointment. A lower PG addition temperature was also found to be beneficial. The stabilization of the ointment at a lower PG addition temperature was hypothesized to be due to more effective encapsulation by crystallizing mono- and diglycerides at the lower temperature. The in vitro release profiles were found to be not influenced by the processing parameters, suggesting that for the ointment platform studied, processing affects the microstructure, but the effects do not translate into the release profile, a key performance indicator. Our systematic study represents a Quality-by-Design (QbD) approach to the design of a robust manufacturing process for delivering stable ointments with the desired performance attributes and properties.

A randomized controlled trial to investigate the use of acute coronary syndrome therapy in patients hospitalized with COVID-19: the COVID-19 Acute Coronary Syndrome trial.

BACKGROUND: Patients hospitalized with COVID-19 suffer thrombotic complications. Risk factors for poor outcomes are shared with coronary artery disease. OBJECTIVES: To investigate the efficacy of an acute coronary syndrome regimen in patients hospitalized with COVID-19 and coronary disease risk factors. METHODS: A randomized controlled, open-label trial across acute hospitals (United Kingdom and Brazil) added aspirin, clopidogrel, low-dose rivaroxaban, atorvastatin, and omeprazole to standard care for 28 days. Primary efficacy and safety outcomes were 30-day mortality and bleeding. The key secondary outcome was a daily clinical status (at home, in hospital, on intensive therapy unit admission, or death). RESULTS: Three hundred twenty patients from 9 centers were randomized. The trial terminated early due to low recruitment. At 30 days, there was no significant difference in mortality (intervention vs control, 11.5% vs 15%; unadjusted odds ratio [OR], 0.73; 95% CI, 0.38-1.41; p = .355). Significant bleeds were infrequent and were not significantly different between the arms (intervention vs control, 1.9% vs 1.9%; p > .999). Using a Bayesian Markov longitudinal ordinal model, it was 93% probable that intervention arm participants were more likely to transition to a better clinical state each day (OR, 1.46; 95% credible interval [CrI], 0.88-2.37; Pr [beta > 0], 93%; adjusted OR, 1.50; 95% CrI, 0.91-2.45; Pr [beta > 0], 95%) and median time to discharge to home was 2 days shorter (95% CrI, -4 to 0; 2% probability that it was worse). CONCLUSION: Acute coronary syndrome treatment regimen was associated with a reduction in the length of hospital stay without an excess in major bleeding. A larger trial is needed to evaluate mortality.

A randomized controlled trial to investigate the use of acute coronary syndrome therapy in patients hospitalized with COVID-19: the COVID-19 Acute Coronary Syndrome trial

BACKGROUND: patients hospitalised with covid-19 suffer thrombotic complications. risk factors for poor outcomes are shared with coronary artery disease. Objectives: to investigate efficacy of an acute coronary syndrome regimen in patients hospitalised with covid-19 and coronary disease risk factors. PATIENTS/METHODS: a randomised controlled open-label trial across acute hospitals (uk and brazil) added aspirin, clopidogrel, low-dose rivaroxaban, atorvastatin, and omeprazole to standard care for 28-days. primary efficacy and safety outcomes were 30-day mortality and bleeding. the key secondary outcome was a daily clinical status (at home, in hospital, on intensive therapy unit admission, death). RESULTS: 320 patients from 9 centres were randomised. the trial terminated early due to low recruitment. at 30 days there was no significant difference in mortality (intervention: 11.5% vs control: 15%, unadjusted or 0.73, 95%ci 0.38 to 1.41, p=0.355). significant bleeds were infrequent and not significantly different between the arms (intervention: 1.9% vs control 1.9%, p>0.999). using a bayesian markov longitudinal ordinal model, it was 93% probable that intervention arm participants were more likely to transition to a better clinical state each day (or 1.46, 95% cri 0.88 to 95 2.37, pr(beta>0) =93%; adjusted or 1.50, 95% cri 0.91 to 2.45, pr(beta>0) =95%) and median time to discharge home was two days shorter (95% cri -4 to 0, 2% probability that it was worse). CONCLUSIONS: acute coronary syndrome treatment regimen was associated with a 99 reduction in the length of hospital stay without an excess in major bleeding. a larger trial is needed to evaluate mortality.

Assessing and Predicting Physical Stability of Emulsion-Based Topical Semisolid Products: A Review.

The emulsion-based topical semisolid dosage forms present a high degree of complexity due to their microstructures which is apparent from their compositions comprising at least two immiscible liquid phases, often times of high viscosity. These complex microstructures are thermodynamically unstable, and the physical stability of such preparations is governed by formulation parameters such as phase volume ratio, type of emulsifiers and their concentration, HLB value of the emulsifier, as well as by process parameters such as homogenizer speed, time, temperature etc. Therefore, a detailed understanding of the microstructure in the DP and critical factors that influence the stability of emulsions is essential to ensure the quality and shelf-life of emulsion-based topical semisolid products. This review aims to provide an overview of the main strategies used to stabilize pharmaceutical emulsions contained in semisolid products and various characterization techniques and tools that have been utilized so far to evaluate their long-term stability. Accelerated physical stability assessment using dispersion analyzer tools such as an analytical centrifuge to predict the product shelf-life has been discussed. In addition, mathematical modeling for phase separation rate for non-Newtonian systems like semisolid emulsion products has also been discussed to guide formulation scientists to predict a priori stability of these products.

Continuous Manufacturing of Oil in Water (O/W) Emulgel by Extrusion Process.

Pharmaceutical industries and drug regulatory agencies are inclining towards continuous manufacturing due to better control over the processing conditions and in view to improve product quality. In the present work, continuous manufacturing of O/W emulgel by melt extrusion process was explored using lidocaine as an active pharmaceutical ingredient. Emulgel was characterized for pH, water activity, globule size distribution, and in vitro release rate. Additionally, effect of temperature (25°C and 60°C) and screw speed (100, 300, and 600 rpm) on the globule size and in vitro release rate was studied. Results indicated that at a given temperature, emulgel prepared under screw speed of 300 rpm resulted in products with smaller globules and faster drug release.

Evaluation of cannabidiol nanoparticles and nanoemulsion biodistribution in the central nervous system after intrathecal administration for the treatment of pain.

We investigated how the biodistribution of cannabidiol (CBD) within the central nervous system (CNS) is influenced by two different formulations, an oil-in-water (O/W) nanoemulsion and polymer-coated nanoparticles (PCNPs). We observed that both CBD formulations administered were preferentially retained in the spinal cord, with high concentrations reaching the brain within 10 min of administration. The CBD nanoemulsion reached Cmax in the brain at 210 ng/g within 120 min (Tmax), whereas the CBD PCNPs had a Cmax of 94 ng/g at 30 min (Tmax), indicating that rapid brain delivery can be achieved through the use of PCNPs. Moreover, the AUC0-4h of CBD in the brain was increased 3.7-fold through the delivery of the nanoemulsion as opposed to the PCNPs, indicating higher retention of CBD at this site. Both formulations exhibited immediate anti-nociceptive effects in comparison to the respective blank formulations.

Effects of haemodynamically atrio-ventricular optimized His bundle pacing on heart failure symptoms and exercise capacity: the His Optimized Pacing Evaluated for Heart Failure (HOPE-HF) randomized, double-blind, cross-over trial.

AIMS: Excessive prolongation of PR interval impairs coupling of atrio-ventricular (AV) contraction, which reduces left ventricular pre-load and stroke volume, and worsens symptoms. His bundle pacing allows AV delay shortening while maintaining normal ventricular activation. HOPE-HF evaluated whether AV optimized His pacing is preferable to no-pacing, in a double-blind cross-over fashion, in patients with heart failure, left ventricular ejection fraction (LVEF) ≤40%, PR interval ≥200 ms and either QRS ≤140 ms or right bundle branch block. METHODS AND RESULTS: Patients had atrial and His bundle leads implanted (and an implantable cardioverter-defibrillator lead if clinically indicated) and were randomized to 6 months of pacing and 6 months of no-pacing utilizing a cross-over design. The primary outcome was peak oxygen uptake during symptom-limited exercise. Quality of life, LVEF and patients' holistic symptomatic preference between arms were secondary outcomes. Overall, 167 patients were randomized: 90% men, 69 ± 10 years, QRS duration 124 ± 26 ms, PR interval 249 ± 59 ms, LVEF 33 ± 9%. Neither peak oxygen uptake (+0.25 ml/kg/min, 95% confidence interval [CI] -0.23 to +0.73, p = 0.3) nor LVEF (+0.5%, 95% CI -0.7 to 1.6, p = 0.4) changed with pacing but Minnesota Living with Heart Failure quality of life improved significantly (-3.7, 95% CI -7.1 to -0.3, p = 0.03). Seventy-six percent of patients preferred His bundle pacing-on and 24% pacing-off (p < 0.0001). CONCLUSION: His bundle pacing did not increase peak oxygen uptake but, under double-blind conditions, significantly improved quality of life and was symptomatically preferred by the clear majority of patients. Ventricular pacing delivered via the His bundle did not adversely impact ventricular function during the 6 months.

Ablation versus anti-arrhythmic therapy for reducing all hospital episodes from recurrent atrial fibrillation: a prospective, randomized, multi-centre, open label trial.

AIMS: There is rising healthcare utilization related to the increasing incidence and prevalence of atrial fibrillation (AF) worldwide. Simplifying therapy and reducing hospital episodes would be a valuable development. The efficacy of a streamlined AF ablation approach was compared to drug therapy and a conventional catheter ablation technique for symptom control in paroxysmal AF. METHODS AND RESULTS: We recruited 321 patients with symptomatic paroxysmal AF to a prospective randomized, multi-centre, open label trial at 13 UK hospitals. Patients were randomized 1:1:1 to cryo-balloon ablation without electrical mapping with patients discharged same day [Ablation Versus Anti-arrhythmic Therapy for Reducing All Hospital Episodes from Recurrent (AVATAR) protocol]; optimization of drug therapy; or cryo-balloon ablation with confirmation of pulmonary vein isolation and overnight hospitalization. The primary endpoint was time to any hospital episode related to treatment for atrial arrhythmia. Secondary endpoints included complications of treatment and quality-of-life measures. The hazard ratio (HR) for a primary endpoint event occurring when comparing AVATAR protocol arm to drug therapy was 0.156 (95% CI, 0.097-0.250; P < 0.0001 by Cox regression). Twenty-three patients (21%) recorded an endpoint event in the AVATAR arm compared to 76 patients (74%) within the drug therapy arm. Comparing AVATAR and conventional ablation arms resulted in a non-significant HR of 1.173 (95% CI, 0.639-2.154; P = 0.61 by Cox regression) with 23 patients (21%) and 19 patients (18%), respectively, recording primary endpoint events (P = 0.61 by log-rank test). CONCLUSION: The AVATAR protocol was superior to drug therapy for avoiding hospital episodes related to AF treatment, but conventional cryoablation was not superior to the AVATAR protocol. This could have wide-ranging implications on how demand for AF symptom control is met. TRIAL REGISTRATION: Clinical Trials Registration: NCT02459574.

Arthroscopic Allograft Bone Block Procedure with Remplissage for Bipolar Lesions.

Anterior shoulder instability with bone loss is a challenging condition. The two most performed procedures, Bankart repair & Latarjet, are not without issues. We describe a technique where arthroscopic free bone grafting was performed in conjunction with remplissage. We feel that this combined arthroscopic procedure offers advantages that include reduced risk of conventional Latarjet complications, including neurological deficits and metal hardware complications while preserving subscapularis and coracoid. Furthermore, these advantages may not come at the cost of compromised outcomes, particularly recurrence rate, as the remplissage may compensate for the possible lack of "sling effect" with free bone graft reconstruction.

Crystallization and Rheology of Mono- and Diglycerides and Their Role in Stabilization of Emulsion Droplets in Model Topical Ointments.

The crystallization behavior of commercial mono- and diglycerides (MDG) in paraffin oil is studied to develop an in-depth understanding of the polymorphic transitions useful for the physical stability of petroleum oil-based topical emulsions. Optical microscopy and differential scanning calorimetry measurements showed the formation of plate-like and spherulite crystals at high and low temperatures, in sequence, while cooling a solution of MDG dissolved in oil. High-resolution NMR and X-ray scattering demonstrate that 1-monoglycerides (mixture of 1-glyceride monostearate and 1-glyceride monopalmitate) cocrystallize to an inverse-lamellar structure (Lα polymorph) that mainly forms plate-like crystals at a higher temperature. The Lα polymorph is seen to exist up to room temperature during the cooling process. At lower temperatures, 1,3-diglycerides (mixture of 1,3-glyceryl distearate and 1,3-glyceryl dipalmitate) crystallize into ß-polymorphs that form spherulites. The spherulites tend to assemble into elongated strands via aggregation, leading to the formation of a percolating network structure. The sizes of both types of crystals decrease with an increasing cooling rate, leading to a higher mechanical modulus due to the increased network connectivity of spherulites. In an emulsion, monoglycerides in the form of Lα polymorphs having plate-like crystal morphology show a higher affinity to the polar liquid/oil interface, thereby providing better interfacial stability compared to the spherulitic ß-polymorphs. However, diglycerides in the form of spherulites form bulk network structures which provide network stabilization to the suspended droplets. This work demonstrates that MDG, a commercially available ingredient that combines the differential functionality of monoglycerides and diglycerides, is an effective, bifunctional, emulsifying agent for petrolatum-based topical emulsions.

API-polymer interactions in Sepineo P600 based topical gel formulation- impact on rheology.

In the present study, topical gel and emulsion gel were formulated using Acrylamide/ Sodium Acryloyldimethyl taurate copolymer (Sepineo P600) as a gelling agent, and their rheological attributes and physical stability were evaluated upon incorporation of API. Lidocaine, a free base drug (pKa 7.92) was used as a model drug in all formulations. Medium- chain Triglycerides (MCT) was used as a dispersed phase to prepare the emulgel. Results show that the rheological properties of both gel and emulgel such as viscosity, elastic moduli and yield stress were significantly influenced by the pH of the topical formulations and API concentration. A lower pH (pH < pKa) leads to the increase in number of cationic species of lidocaine, which results in the weakening of the structure of the gel matrix by charge screening of polymer-polymer repulsions. Interactions between API and polymer chains through electrostatic attraction may play a major role in altering the rheology, which could potentially impact the physical stability against phase separation of the internal phase in emulsion gel samples. This study provides valuable insights into rheological behaviors of Sepineo P600 gel and emulgel which can be modified or tuned though the interplay of the API properties and critical formulation parameters such as pH. The tunable rheological properties with simpler manufacturing process make Sepineo P600 gel and emulsion gel very suitable systems for use in semisolid topical formulations.

Semisolid Pharmaceutical Product Characterization Using Non-invasive X-ray Microscopy and AI-Based Image Analytics.

This work reports the use of X-ray microscopy (XRM) imaging to characterize the microstructure of semisolid formulations containing multiple immiscible phases. For emulsion-based semisolid formulations, the disperse phase globule size and its distribution can be critical quality attributes of the product. Optical microscopy and light diffraction techniques are traditionally used to characterize globule size distribution. These techniques are subjected to sample preparation bias and present challenges from matrix interference and data processing. XRM imaging is an emergent technique that when combined with intelligent data processing has been used to characterize microstructures of pharmaceutical dosage forms including oral solid formulations, controlled release microspheres, and lyophilized products. This work described our first attempt to use XRM imaging to characterize two complex emulsion-based semisolid formulations, a petrolatum-based ointment with a dispersed phase comprising a hydrophilic liquid, and an oil-in-water cream. This initial assessment of technology showed that microstructure details such as globule size distribution, volume fraction, spatial distribution uniformity, inter-globule spacing, and globule sphericity could be obtained and parameterized. It was concluded that XRM imaging, combined with artificial intelligence-based image processing is feasible to generate advanced characterization of semisolid formulation microstructure through 3D visualization and parameterization of globule attributes. This technique holds promise to provide significantly richer microstructure details of semisolid formulations. When fully developed and validated, it is potentially useful for quantitative comparison of microstructure equivalence of semisolid formulations.

Model for Long Acting Injectables (Depot Formulation) Based on Pharmacokinetics and Physical Chemical Properties.

The objective was to develop a model to a priori identify the most suitable depot technology for a candidate based upon its therapeutic index (TI), pharmacokinetics (PK), and physical chemical properties. A depot map of release rates needed to achieve target PK in TI against release rates predicted based on intrinsic dissolution rate (IDR) and particle size (PS) clearly identified three zones: (a) products and candidates around the line of identity for which suspension is the appropriate depot technology, (b) area to the right of line of identity in which depot candidates would require a controlled release technology such as PLGA microspheres since in vivo release rate needed for PK in TI is significantly lower than predicted based on IDR and PS, and (c) area to the left of the line of identity where IDR is not sufficient to achieve target in vivo release rate for PK in TI and hence enhanced dissolution is needed such as with nanoparticles. Dose-solubility technology map of approved depot products and candidates showed clusters of products around a depot technology such as suspensions and microspheres, for drugs with high dose/low solubility and low dose/high solubility compounds, respectively. Novel PK-based computational tool showed how all combinations of depot doses and release rate constants for a candidate can be calculated to achieve plasma levels within the TI bounded by minimum effective and minimum toxic concentrations (MEC and MTC). The PK predictions for several drugs such as estradiol, risperidone, medroxyprogesterone acetate (MPA), and ziprasidone showed how these predictions can guide scientists to target specific depot doses and release rates into the depot formulation. In parallel, IDR of depot compounds clearly showed differentiation of compounds by successful depot technologies to achieve target dose and duration. For drugs with IDR between 0.1 and 1 mg/h/cm2, aqueous suspension has successfully delivered depot PK profile, while for candidates with IDRs greater than 1 mg/h/cm2, controlled release technology such as microsphere or in situ gel was required. The framework, prediction tools, and depot map will reduce the need for semi-empirical formulation work and preclinical studies to design depot formulations. Graphical Abstract.

Use of Free Anterolateral Thigh Flap in Reconstruction of Soft Tissue Defects in Orthopedic Oncology: What are the Outcomes?

INTRODUCTION: Soft tissue defects due to trauma with crush injuries and post-tumor excision are large in size. Free anterolateral flap provides a stable and durable coverage of soft tissue defects and leads to good functional outcomes. MATERIALS AND METHODS: Between January 2017 and January 2019, eight males and six female patients with soft tissue defects were operated upon using a free anterolateral thigh flaps. The defects in ten patients were due to post-tumor extirpation and in four patients due to wound breakdown following post-tumor extirpation. RESULTS: The average flap dimension was 14 cm × 12 cm. The mean follow-up was 11 months (4-28 months). All the flaps survived well except in one patient who with an upper limb defect, had flap necrosis owing to which patient needed to undergo abdominal flap coverage. Two patients with sarcoma developed local recurrence and had to undergo above­knee amputation. CONCLUSION: The method of reconstruction depends on the size of defect and area to be covered and need of post-surgery mobilization and need for radiotherapy. The free anterolateral thigh flap has varied uses in orthopedics with very good extent of coverage and provides very potent coverage of neurovascular structures, bones, tendons, and implants.

Impact of COVID -19 in cancer patients on severity of disease and fatal outcomes: A systematic review and meta-analysis.

BACKGROUND AND AIMSBACKGROUND: Currently there is limited knowledge on cancer and COVID-19; we conducted a systematic review and meta-analysis to evaluate the impact of cancer on serious events including ICU admission rate and mortality in COVID 19. METHODS: PubMed, Cochrane Central Register of Clinical Trials were searched on April 16, 2020, to extract published articles that reported the outcomes of cancer in COVID-19 patients. The search terms were "coronavirus" and "clinical characteristics" with no language or time restrictions. We identified 512 published results and 13 studies were included in the analysis. RESULTS: There were 3775 patients, of whom 63 (1·66%) had a cancer. The pooled estimates of ICU admission in COVID 19 patients with and without cancer were 40% versus 8·42%.The odds ratio of ICU admission rates between the cancer and non-cancer groups was 2.88 with a 95% CI of 1·18 to 7·01 (p = 0·026). The pooled estimates of death rate in COVID -19 patients with and without cancer were 20·83% versus 7·82%. The odds ratio of death rates between the cancer and non-cancer groups was 2.25 with a 95% CI ranging from 0·71 to 7·10 with p value of 0·166. The pooled prevalence of cancer patients was 2% (95 CI 1-4). CONCLUSIONS: Presence of cancer in COVID-19 leads to higher risk of developing serious events i.e. ICU admission, mechanical ventilation and mortality. The presence of cancer has a significant impact on mortality rate in COVID-19 patients.