A systematic review of the role of integrated farming and the participation of universities in ensuring food security: Malaysia's effort.

Food security is critical for promoting health and well-being and achieving sustainable development, especially in developing countries. Despite the recent efforts to improve it, food security is still a concern due to the rapid increase in populations, conflicts, and natural disasters worldwide. Universities, particularly agricultural universities, play an essential role in addressing food security issues by researching, developing new technologies, and providing education and training to farmers and other stakeholders. The main objective of this review is to discuss the role of universities and integrated farming in ensuring food security, specifically in Malaysia. It includes a brief overview of the different types of integrated farming methods that can be used to improve food security and finally discusses the Student Farmer Entrepreneur program, which can be crucial for promoting food security by increasing agricultural productivity, promoting local food production, encouraging sustainable agriculture practices, and supporting rural development. This review also considers the significant impact of the Malaysian government and universities on food security. With integrated farming and the Student Farmer Entrepreneur program, food security can be further improved.

Characterization and isolation method of Gigantochloa scortechinii (Buluh Semantan) cellulose nanocrystals.

This study explored the impact of sodium hydroxide and benzoylation treatment on the production of cellulose nanocrystals from Semantan bamboo (Gigantochloa scortechinii). Bamboo cellulose nanocrystals (BCNs) were obtained via acid hydrolysis, with the effectiveness of an isolation method and chemical treatments demonstrated in removing non-cellulosic constituents. X-ray diffraction analysis revealed a crystalline cellulose II structure for benzoylated BCN (B) and a crystalline cellulose I structure for NaOH-treated BCN (S), with BCN (S) exhibiting a higher crystallinity index (80.55 %) compared to BCN (B) (67.87 %). The yield of BCN (B) (23.68 ± 1.10 %) was higher than BCN (S) (20.65 ± 2.21 %). Transmission electron microscopy images showed a mean diameter of 7.95 ± 2.79 nm for BCN (S) and 9.22 ± 3.38 nm for BCN (B). Thermogravimetric analysis indicated lower thermal stability for BCN (B) compared to BCN (S), with charcoal residues at 600 °C of 31.06 % and 22 %, respectively. Zeta potential values were -41.60 ± 1.97 mV for BCN (S) and -21.80 ± 2.54 mV for BCN (B). Gigantochloa scortechinii holds significant potential for sustainable and eco-friendly applications in the construction, furniture, and renewable energy industries. These findings highlight the versatility and potential of BCNs derived from Gigantochloa scortechinii for various applications.

Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review.

Precision manufacturing requirements are the key to ensuring the quality and reliability of biomedical implants. The powder bed fusion (PBF) technique offers a promising solution, enabling the creation of complex, patient-specific implants with a high degree of precision. This technology is revolutionizing the biomedical industry, paving the way for a new era of personalized medicine. This review explores and details powder bed fusion 3D printing and its application in the biomedical field. It begins with an introduction to the powder bed fusion 3D-printing technology and its various classifications. Later, it analyzes the numerous fields in which powder bed fusion 3D printing has been successfully deployed where precision components are required, including the fabrication of personalized implants and scaffolds for tissue engineering. This review also discusses the potential advantages and limitations for using the powder bed fusion 3D-printing technology in terms of precision, customization, and cost effectiveness. In addition, it highlights the current challenges and prospects of the powder bed fusion 3D-printing technology. This work offers valuable insights for researchers engaged in the field, aiming to contribute to the advancement of the powder bed fusion 3D-printing technology in the context of precision manufacturing for biomedical applications.

Fatigue and Impact Properties of Kenaf/Glass-Reinforced Hybrid Pultruded Composites for Structural Applications.

To address the weight, cost, and sustainability associated with fibreglass application in structural composites, plant fibres serve as an alternative to reduce and replace the usage of glass fibres. However, there remains a gap in the comprehensive research on plant fibre composites, particularly in their durability for viable structural applications. This research investigates the fatigue and impact properties of pultruded kenaf/glass-reinforced hybrid polyester composites tailored for structural applications. Utilising kenaf fibres in mat form, unidirectional E-glass fibre direct roving yarns, and unsaturated polyester resin as key constituents, pultruded kenaf/glass hybrid profiles were fabricated. The study reveals that pultruded WK/UG alternate specimens exhibit commendable fatigue properties (18,630 cycles at 60% ultimate tensile strength, UTS) and fracture energy (261.3 kJ/m2), showcasing promise for moderate load structural applications. Notably, the pultruded 3 WK/UG/3WK variant emerges as a viable contender for low-load structural tasks recorded satisfactory fatigue properties (10,730 cycles at 60% UTS) and fracture energy (167.09 kJ/m2). Fatigue failure modes indicate that the stress applied is evenly distributed. Ductile failures and delaminations during impact test can be attributed to damping and energy absorbing properties of kenaf fibres. Moreover, incorporating kenaf as a hybrid alternative demonstrates substantial reductions in cost (35.7-50%) and weight (9.6-19.1%). This research establishes a foundation for advancing sustainable and efficient structural materials and highlights the significant role of materials design in shaping the future of engineering applications.

Experimental Investigation on the Corrosion Detectability of A36 Low Carbon Steel by the Method of Phased Array Corrosion Mapping.

Petrochemical plants use on-stream inspection often to detect and monitor the corrosion on the equipment and piping system. Compared to ultrasonic thickness gauging and pulse-echo A-scan, phased array corrosion mapping has better coverability and can scan a large area to detect general and localized corrosion. This paper's objective is to obtain documentary evidence for the accuracy of corrosion detection from 30 °C to 250 °C on A36 low-carbon steel by carrying out simulation experiments every 10 °C step. A minimum of three sets of phased array corrosion mapping data in each temperature were collected to study and evaluate the detectability. The data evidence could enhance the confidence level of the plant's end users in using phased array mapping in the future during inspections. The experiments were found to be insufficiently thorough despite addressing the initial concerns, leaving more area for discussion in further studies, such as expanding the investigation to thicker carbon steel, stainless steel, and wedge materials.

Review on Type of Sensors and Detection Method of Anti-Collision System of Unmanned Aerial Vehicle.

Unmanned aerial vehicle (UAV) usage is increasing drastically worldwide as UAVs are used in various industries for many applications, such as inspection, logistics, agriculture, and many more. This is because performing a task using UAV makes the job more efficient and reduces the workload needed. However, for a UAV to be operated manually or autonomously, the UAV must be equipped with proper safety features. An anti-collision system is one of the most crucial and fundamental safety features that UAVs must be equipped with. The anti-collision system allows the UAV to maintain a safe distance from any obstacles. The anti-collision technologies are of crucial relevance to assure the survival and safety of UAVs. Anti-collision of UAVs can be varied in the aspect of sensor usage and the system's working principle. This article provides a comprehensive overview of anti-collision technologies for UAVs. It also presents drone safety laws and regulations that prevent a collision at the policy level. The process of anti-collision technologies is studied from three aspects: Obstacle detection, collision prediction, and collision avoidance. A detailed overview and comparison of the methods of each element and an analysis of their advantages and disadvantages have been provided. In addition, the future trends of UAV anti-collision technologies from the viewpoint of fast obstacle detection and wireless networking are presented.

Ultrasonic Velocity and Attenuation of Low-Carbon Steel at High Temperatures.

On-stream inspections are the most appropriate method for routine inspections during plant operation without undergoing production downtime. Ultrasonic inspection, one of the on-stream inspection methods, faces challenges when performed at high temperatures exceeding the recommended 52 °C. This study aims to determine the ultrasonic velocity and attenuation with known material grade, thickness, and temperatures by comparing theoretical calculation and experimentation, with temperatures ranging between 30 °C to 250 °C on low-carbon steel, covering most petrochemical equipment material and working conditions. The aim of the theoretical analysis was to obtain Young's modulus, Poisson's ratio, and longitudinal velocity at different temperatures. The experiments validated the theoretical results of ultrasonic change due to temperature increase. It was found that the difference between the experiments and theoretical calculation is 3% at maximum. The experimental data of velocity and decibel change from the temperature range provide a reference for the future when dealing with unknown materials information on site that requires a quick corrosion status determination.

Selection of Natural Fibre for Pultruded Hybrid Synthetic/Natural Fibre Reinforced Polymer Composites Using Analytical Hierarchy Process for Structural Applications.

Application of synthetic fibres in composites has been raising environmental issues due to carbon emissions from the production site and reliability on non-renewable resources upon production. Hence, this research sets as a preliminary study to select suitable natural fibres to be hybridized with glass fibres for the development of sustainable and high-performance hybrid composites as potential alternative to conventional pultruded fibreglass composites in structural profile applications. In this study, analytical hierarchy process (AHP) was conducted to select the ideal natural fibre as reinforcement in the hybrid pultruded FRP composites suitable for structural applications. Hence, 13 natural fibre candidates were selected as alternatives and six criteria were chosen and analysed to select the best candidate for pultruded hybrid FRP. Criteria such as tensile strength, tensile modulus, density, cellulose content, elongation, and availability of fibres were assigned as the standard of selecting natural fibres for the application intended in this study. Among the 13 alternatives, kenaf was found to be the most suitable reinforcement for the application as it yielded the highest priority vector at 0.1. The results were then validated by carrying out sensitivity analysis to ensure kenaf is the most suitable material for the research.

Review of Recent Efforts in Cooling Photovoltaic Panels (PVs) for Enhanced Performance and Better Impact on the Environment.

The global need for energy has grown in tandem with mankind's development and spread. This has resulted in an increase in the use of fossil energy sources, a decline in these sources and an increase in pollution, necessitating the search for renewable energy sources. One of the important ways to reduce pollution resulting from the increasing consumption of fossil energy is to enhance the sources of solar energy, of which photovoltaic cells (PV) are one of its most important tools. Therefore, it was necessary to pay attention to improving its efficiency for it to become a promising source of clean energy. PVs turn solar energy into electricity; however, the amount of electricity generated decreases as the temperature of the cells rises in response to the sun's heat. Cooling of the optical surfaces is one of the most important elements to consider while running solar PV systems to obtain maximum efficiency. The electrical efficiency of PVs is enhanced when suitable cooling technology is used, and the rate of cell breakdown is reduced over time, extending the life of the PV panels. There are many materials used to remove unwanted heat in PV cells, and in recent years, the focus has been on integrating nanomaterials in specific proportions with traditional cooling materials such as water to improve their thermal properties. As a bio-material that is environmentally friendly, renewable, sustainable, inexpensive and has high mechanical properties, cellulose nanocrystals (CNCs) are one of the most promising materials for improving the properties of cooling materials for cooling PV cells and improving their performance.

A Review on the Effect of Fabric Reinforcement on Strength Enhancement of Natural Fiber Composites.

The main objective of this study is to examine the impact of reinforcements on the strength of natural fiber composites. Recent advancements in natural fiber composites have minimized the usage of man-made fibers, especially in the field of structural applications such as aircraft stiffeners and rotor blades. However, large variations in the strength and modulus of natural fiber degrade the properties of the composites and lower the safety level of the structures under dynamic load. Without compromising the safety of the composite structure, it is significant to enrich the strength and modulus of natural fiber reinforcement for real-time applications. The strength and durability of natural fiber can be enriched by reinforcing natural fiber. The reinforcement effect on natural fiber in their woven, braided, and knit forms enhances their structural properties. It improves the properties of natural fiber composites related to reinforcement with short and random-orientation fibers. The article also reviews the effect of the hybridization of natural fiber with cellulosic fiber, synthetic fiber, and intra-ply hybridization on its mechanical properties, dynamic mechanical properties, and free vibration characteristics, which are important for predicting the life and performance of natural fiber composites for weight-sensitive applications under dynamic load.

Effect of Prosopis Juliflora Thorns on Mechanical Properties of Plastic Waste Reinforced Epoxy Composites.

Plastics are unavoidable at this times, putting our planet in danger. The Prosopis juliflora (PJ) thorns are collected, processed, and powdered. The mechanical characteristics of these powders are examined when combined with polymer composites. Pores are the main cause of moisture input, hence using powder filler materials reduces the number of pores in the composite, increasing water resistance. The composites are made by altering three parameters: waste plastic content, filler powder composition, and chemical treatment. It was discovered that the integration of thorn powder increased the wear resistance. The composites were tested in accordance with ASTM standards, and the results were optimized. Based on the results, composite specimens were created and tested for validation.

A review on the orthotics and prosthetics and the potential of kenaf composites as alternative materials for ankle-foot orthosis.

Since ancient Egypt, orthosis was generally made from wood and then later replaced with metal and leather which are either heavy, bulky, or thick decreasing comfort among the wearers. After the age of revolution, the manufacturing of products using plastics and carbon composites started to spread due to its low cost and form-fitting feature whereas carbon composite were due to its high strength/stiffness to weight ratio. Both plastic and carbon composite has been widely applied into medical devices such as the orthosis and prosthesis. However, carbon composite is also quite expensive, making it the less likely material to be used as an Ankle-Foot Orthosis (AFO) material whereas plastics has low strength. Kenaf composite has a high potential in replacing all the current materials due to its flexibility in controlling the strength to weight ratio properties, cost-effectiveness, abundance of raw materials, and biocompatibility. The aim of this review paper is to discuss on the possibility of using kenaf composite as an alternative material to fabricate orthotics and prosthetics. The discussion will be on the development of orthosis since ancient Egypt until current era, the existing AFO materials, the problems caused by these materials, and the possibility of using a Kenaf fiber composite as a replacement of the current materials. The results show that Kenaf composite has the potential to be used for fabricating an AFO due to its tensile strength which is almost similar to polypropylene's (PP) tensile strength, and the cheap raw material compared to other type of materials.