Novel composite from chitosan and a metal-organic framework for removal of tartrazine dye from aqueous solutions; adsorption isotherm, kinetic, and optimization using Box-Benkhen design.

Cosmetics, textiles, foodstuffs, and medicines frequently contain the yellow dye tartrazine. It has carcinogenic properties and can trigger allergies. In this study, a unique NH2-MIL-101(Cr)/chitosan composite (MIL/chitosan composite) was created using a hydrothermal process. The effectiveness of this composite in removing Tartrazine (TZ) from aqueous solutions was investigated. It was characterized via FT-IR, XPS, XRD, and BET analysis. The surface area of the MIL/chitosan nanoadsorbent sample was 1256.64 m2/g, where after five times recycling, it was reduced to 1068.14 m2/g. The study analyzed the impact of dye concentration, pH, temperature, and MIL/chitosan composite dosage. Experimental measurements were taken for the equilibrium isotherms of dye adsorption. The kinetic models and adsorption isotherm were used to analyze the results. The adsorption process was found to match Langmuir and pseudo-second-order kinetic models. Chemisorption was the mechanism of the adsorption process. Based on thermodynamic parameters, it was determined that the adsorption process was endothermic. The MIL/chitosan composite was recycled up to five cycles. Using the MIL/chitosan composite towards the adsorption of the tartrazine from the real sample has been checked. The interaction process between the MIL/chitosan nanoadsorbent and Tartrazine adsorbate has been investigated. The TZ electrical characteristics, reactivity, and shape were ascertained through the application of density functional theory (DFT). The placement of electrophilic and nucleophilic attack sites is in good agreement with the molecular orbitals (HOMO and LUMO) and MEP results, according to DFT. The optimization of adsorption results was accomplished using Box-Behnken design (BBD).

Carboxymethyl-imidazolium O-vanillin Schiff base grafted into NH2-tagged MIL-101 (Cr) for effective removal of cupric ions from aqueous effluents.

A novel adsorbent (MIL-CMIVSB) was fabricated by modification of H2N-MIL-101(Cr) with carboxymethyl-imidazolium O-vanillin Schiff base. The MIL-CMIVSB's physicochemical characteristics were examined using the pertinent characterization methods. NH2-MIL-101(Cr) has a BET surface area of 1492.4 m2g-1, while MIL-CMIVSB adsorbent had 1278.7 m2g-1. Batch adsorption experiments examined the MIL-CMIVSB's cupric ion adsorption capacity from aqueous solutions at different adsorbent doses (0.1-3 mg), pH (2.0-10.0), contact times (0-240 min), metal ion initial concentrations (10-300 mg/L), and temperatures (298-308 K). The optimum conditions were 1 mg/mL of MIL-CMIVSB adsorbent, 46 min adsorption time, pH 7, 100 ppm initial cupric ion concentration, and 303 K temperature. MIL-CMIVSB effectively and selectively removes cupric ions with an adsorption capability of 359.05 ± 12.06 mg/g. The nonlinear Liu isotherm governed Cu(II) sorption performance on MIL-CMIVSB (KL = 0.257 ± 0.01 mg/g, R2 = 0.99892) and pseudo-2nd-order kinetically (k2 = 0.00116 × 10-4 g/mg min, R2 = 0.99721).

Penile reconstruction after complete bladder exstrophy repair.

INTRODUCTION: The decreased penile length in patients born with bladder exstrophy (BE) results partly from pubic symphysis diastasis and the separation of the corporal bodies. Also, intrinsic shortening of anterior corporal compartment, residual penile dorsal curvature, and postsurgical scarred skin share in creation of short penile length. OBJECTIVE: The goal of this study was to look at whether adult men who had bladder exstrophy (BE) surgery as babies needed and benefited from penile reconstruction, which included penile lengthening and repair of any redo penile pathology that was present at the same time. STUDY DESIGN: We reviewed the records of 31 repaired BE patients with mean age of 21.4 ± 3.7 years. The patients complained of their dissatisfaction with short penile length, residual dorsal penile curvature, distal dorsal or hypospadiac urethral opening and scared penopubic skin. The penile lengthening was performed by sub-periosteal detachment of the corporal bodies from the pubic rami in all cases. In 8 patients full thickness dermal grafts were used to penile resurfacing after its lengthening. Twelve patients underwent coronal or glanular urethroplasty. Phalloplasty was performed in one patient using forearm free graft. RESULTS: Subjective evaluation by the patient reported satisfactory results in 25/31 (80.6 %). The degree of penile lengthening measured at 6 months and one year postoperatively showed increased length which varied between 50 % and 150 % of the preoperative penile length. DISCUSSION: We hypothesize that congenital causes, such as short anterior corporeal compartment, wide pubic rami diastasis, and short penile urethra, as well as iatrogenic causes, such as post-surgical peno-pubic scars, could account for the coexisting multifactorial causes of penile shortening in male adults with BE. Penile lengthening is permitted, in our opinion, provided that the crura from the pubic rami is carefully and partially mobilized. CONCLUSIONS: The short phallus, residual dorsal chordee and distal urethroplasty can be corrected successfully in the majority of patients. Adult males with BE may have short penis that requires another reconstructive stage. The short phallus, residual chordee and distal urethroplasty can be corrected` successfully in the majority of patients.

The long-term consequences of the hypospadias salvage repair issue.

PURPOSE: To present the long-term results of redo-hypospadias at our tertiary referral center following a failed prior repair. METHODS: One hundred sixty-four individuals with a history of unsuccessful repairs qualified for our retrospective cohort study. Our inclusion criteria were as follows: pre-operative data that was accessible, redo-hypospadias that was successfully repaired, and at least three years of follow-up at the last hospital visit. RESULTS: The mean patient age was 91.3 ± 21.1 months. The mean follow-up after successful repair was 41.3 ± 3.1 months. Ninety-two (group A) had one prior repair, and 72 (group B) had 2 or 3 repairs. Group A underwent six primary techniques: 32 underwent Onlay Island Flap (OIF), 10 underwent Mathieu, 12 underwent Tubularized Incised Plate Urethroplasty (TIPU), 8 underwent Urethral Mobilization (UM), and 34 underwent Buccal Mucosal Graft (BMG) { dorsal inlay Graft Urethroplasty (DIGU) in 4 and staged BMG in 30 patients}. In group B, four procedures were used: TIPU in 4, UM in 6, and BMG in 62 (staged BMG in 50 cases and DIGU in 12). CONCLUSIONS: The selected type of repair will depend on many factors, like residual healthy local skin and expertise. Safe techniques for repair of redo hypospadias after its 1st failure include TIPU, Mathieu, UM, OIF, and DIGU for distal varieties. After 2nd or 3rd repair DIGU, UM, and TIPU can be performed in distal types, while staged BMG can be applied for proximal ones.

A comprehensive review on the application of semiconducting materials in the degradation of effluents and water splitting.

In this comprehensive review article, we delve into the critical intersection of environmental science and materials science. The introduction sets the stage by emphasizing the global water shortage crisis and the dire consequences of untreated effluents on ecosystems and human health. As we progress into the second section, we embark on an intricate exploration of piezoelectric and photocatalytic principles, illuminating their significance in wastewater treatment and sustainable energy production. The heart of our review is dedicated to a detailed analysis of the detrimental impacts of effluents on human health, underscoring the urgency of effective treatment methods. We dissected three key materials in the realm of piezo-photocatalysis: ZnO-based materials, BaTiO3-based materials, and bismuth-doped materials. Each material is scrutinized for its unique properties and applications in the removal of pollutants from wastewater, offering a comprehensive understanding of their potential to address this critical issue. Furthermore, our exploration extends to the realm of hydrogen production, where we discuss various types of hydrogen and the role of piezo-photocatalysis in generating clean and sustainable hydrogen. By illuminating the synergistic potential of these advanced materials and technologies, we pave the way for innovative solutions to the pressing challenges of water pollution and renewable energy production. This review article not only serves as a valuable resource for researchers and scholars in the fields of material science and environmental engineering but also underscores the pivotal role of interdisciplinary approaches in addressing complex global issues.

Long term evaluation of continence after complete primary bladder exstrophy repair.

INTRODUCTION: Continence after bladder exstrophy (BE) repair remains a major debatable challenge to pediatric urologists, together with the lack of standard definitions and long-term results in large series. OBJECTIVE: We assessed the long-term urinary continence in 142 toilet-trained cases after one (1-) stage of complete primary repair of bladder exstrophy (CPRE) and consequent procedures to achieve this goal in a single tertiary referral center. STUDY DESIGN: The current retrospective study included 123 boys and 19 girls with BE that were repaired by (1-) stage CPRE. The Mean age at (BE) repair was 9.5 ± 2.6 weeks. Complete penile disassembly (CPD) was used for epispadias repair in 42 (34.1%) and modified Cantwell-Ransley repair (MCR) was used in 81 (65.9%) boys. Bilateral anterior transverse innominate osteotomies (ATIO) were applied in all. Urinary continence was expressed in terms of the dry interval (DI). Continence procedures were afforded if CPRE failed to achieve DI ≥ 3 h (hrs.), those were in the form of endoscopic bladder neck injection (BNI), bladder neck reconstruction (BNR), and bladder neck closure (BNC) with catheterizable stoma. RESULTS: The mean age at follow up was 12.1 ± 5.2 years. DI ≥ 3 h was gained in 23 (16.2%) after CPRE alone, while complementary post-CPRE continence procedures were required to reach this goal in the remaining patients. Deflux injection was reported in 10 (7%), CIC in 8 (5.6%), BNR in 32 (22.5), and BNC with catheterizable stoma alone in 37 (26.1%), or with Charleston pouch in 32 (22.5%). DISCUSSION: We think that ≥3 h DI with voiding represents an appropriate definition of continence after BE repair. According to the results in the current series, we think that successful anatomical closure of BE is achievable, but the functional outcome in terms of continence and its evaluation is tricky. Results of continence were reported to change with age of the child, and it is difficult to evaluate both before toilet training age and long-term follow up. CONCLUSIONS: Long-term follow up of CPRE with bilateral ATIO alone or with BNI results in ≥3 h DI in a few cases; BNR after CPRE can provide a good chance for continence; otherwise, BNC with catheterizable stoma is a valid option.

Evaluation of two commercially available rapid stool antigen tests for the diagnosis of Helicobacter pylori infection.

INTRODUCTION: Helicobacter pylori (H. pylori) is one of the most prevalent infections, which can cause chronic gastritis, peptic ulcers and even gastric cancer. Prompt diagnosis and subsequent eradication are essential. Many commercially available H. pylori stool antigen diagnostic kits are used. However, the diagnostic performance of these tests has not yet been evaluated. This study aimed to evaluate two commercial rapid H. pylori Stool Antigen-Lateral Flow Immunochromatography Assay kits (HpSA-LFIA). METHODOLOGY: A total of 88 adult patients with dyspeptic symptoms were included in the study. Full case history was obtained, and fresh stool samples were tested for HpSA by two different kits: RightSign® (BiotesT, Hangzhou, China) and OnSite® (CTK biotech, Poway, USA) and HpSA-enzyme-linked immunosorbent assay (ELISA) as a reference standard. RESULTS: Of the 88 patients, H. pylori infection was positive in 32 (36.4%), negative in 53 (60.2%), and indeterminate in 3 (3.4%) by ELISA. The sensitivity, specificity, positive predictive value, and negative predictive value were as follows: 96.6%, 66.1%, 62%, and 97.4%, respectively for RightSign® test and 96.9%, 50%, 52.5%, and 96.6%, respectively for OnSite® test. CONCLUSIONS: HpSA-LFIA, RightSign® and OnSite®, are good negative tests, however they cannot be used as a sole test for diagnosis and needs other confirmatory tests in case of positive results.

Does primary urethral realignment improve the outcome of pediatric pelvic fracture urethral injury? A randomized controlled trial.

OBJECTIVE: To assess the efficacy of primary urethral realignment in the prevention of urethral stenosis and in simplifying delayed urethroplasty after complete pelvic fracture urethral injury in male children. METHODS: This randomized comparative trial included 40 boys <18 years with complete pelvic fracture urethral injury. The initial management was a primary urethral realignment in 20 boys and suprapubic cystostomy alone in the remaining 20 boys. The boys who underwent primary urethral realignment were assessed regarding the development of urethral stenosis. Boys who needed to be delayed urethroplasty in the two groups were compared regarding urethral defect length, intraoperative details, postoperative outcomes, number of procedures, and time to achieve normal voiding. RESULTS: Although 14 (70%) patients were able to void after primary urethral realignment, all of them developed urethral stenosis and needed delayed urethroplasty. No statistically significant difference between the two groups was found regarding urethral defect length, intraoperative details, and postoperative outcomes. Patients in the primary urethral realignment group underwent significantly more procedures (p < 0.001) and took a significantly longer time to achieve normal voiding (p = 0.002). CONCLUSION: Primary urethral realignment is neither able to prevent urethral stenosis nor effective in simplifying later urethroplasty after complete pelvic fracture urethral injury in male children. It exposes the patients to more surgical procedures and a prolonged clinical course.

Adsorption and Removal of Tetrabromobisphenol A by Adsorption on Functionalized Mesoporous Silica Nanotubes: Isotherms, Kinetics, Thermodynamics, and Optimization via Box-Behnken Design.

In pursuit of environmental safety, a novel and efficient method-dispersive solid-phase extraction based on functionalized mesoporous silica nanotubes (FMSNT nanoadsorbent)-was developed to remove tetrabromobisphenol A (TBBPA) from water samples. Characterization and comprehensive analysis of the FMSNT nanoadsorbent, including maximum adsorption capacity of 815.85 mg g-1 for TBBPA and its water stability, confirmed its potential. Subsequent analysis revealed the impact of multiple factors, for instance pH, concentration, dose, ionic strength, time, and temperature, on the adsorption process. The findings revealed that the adsorption of TBBPA followed the Langmuir and pseudo-second-order kinetics models while primarily driven by hydrogen bond interactions between bromine ions or hydroxyl groups of TBBPA and amino protons around the cavity. The novel FMSNT nanoadsorbent showed high stability and efficiency even after five times of recycling. Moreover, the overall process was identified as chemisorption, endothermic, and spontaneous. Finally, the Box-Behnken design was applied to optimize the results, confirming good reusability even after five cycles.

Effective Adsorption and Removal of Doxorubicin from Aqueous Solutions Using Mesostructured Silica Nanospheres: Box-Behnken Design Optimization and Adsorption Performance Evaluation.

The aim of this study is to evaluate the efficacy of mesoporous silica nanospheres as an adsorbent to remove doxorubicin (DOX) from aqueous solution. The surface and structural properties of mesoporous silica nanospheres were investigated using BET, SEM, XRD, TEM, ζ potential, and point of zero charge analysis. To optimize DOX removal from aqueous solution, a Box-Behnken surface statistical design (BBD) with four times factors, four levels, and response surface modeling (RSM) was used. A high amount of adsorptivity from DOX (804.84 mg/g) was successfully done under the following conditions: mesoporous silica nanospheres dose = 0.02 g/25 mL; pH = 6; shaking speed = 200 rpm; and adsorption time = 100 min. The study of isotherms demonstrated how well the Langmuir equation and the experimental data matched. According to thermodynamic characteristics, the adsorption of DOX on mesoporous silica nanospheres was endothermic and spontaneous. The increase in solution temperature also aided in the removal of DOX. The kinetic study showed that the model suited the pseudo-second-order. The suggested adsorption method could recycle mesoporous silica nanospheres five times, with a modest reduction in its ability for adsorption. The most important feature of our adsorbent is that it can be recycled five times without losing its efficiency.

Enhanced Adsorption and Evaluation of Tetracycline Removal in an Aquatic System by Modified Silica Nanotubes.

In the present study, a nanocomposite adsorbent based on mesoporous silica nanotubes (MSNTs) loaded with 3-aminopropyltriethoxysilane (3-APTES@MSNTs) was synthesized. The nanocomposite was employed as an effective adsorbent for the adsorption of tetracycline (TC) antibiotics from aqueous media. It has an 848.80 mg/g maximal TC adsorption capability. The structure and properties of 3-APTES@MSNT nanoadsorbent were detected by TEM, XRD, SEM, FTIR, and N2 adsorption-desorption isotherms. The later analysis suggested that the 3-APTES@MSNT nanoadsorbent has abundant surface functional groups, effective pore size distribution, a larger pore volume, and a relatively higher surface area. Furthermore, the influence of key adsorption parameters, including ambient temperature, ionic strength, initial TC concentration, contact time, initial pH, coexisting ions, and adsorbent dosage, had also been investigated. The 3-APTES@MSNT nanoadsorbent's ability to adsorb the TC molecules was found to be more compatible with Langmuir isothermal and pseudo-second-order kinetic models. Moreover, research on temperature profiles pointed to the process' endothermic character. In combination with the characterization findings, it was logically concluded that the 3-APTES@MSNT nanoadsorbent's primary adsorption processes involved interaction, electrostatic interaction, hydrogen bonding interaction, and the pore-fling effect. The synthesized 3-APTES@MSNT nanoadsorbent has an interestingly high recyclability of >84.6 percent up to the fifth cycle. The 3-APTES@MSNT nanoadsorbent, therefore, showed promise for TC removal and environmental cleanup.

New nano materials-based optical sensor for application in rapid detection of Fe(II) and Pd(II) ions.

For the analytical determination of Fe(II) and Pd(II) concentrations, a novel optical sensor based on spectrophotometric technique was used. The optical sensor was prepared by direct immobilization of a novel synthesized chromophore, 5-amino-phenanthrolin-3 formyl salicylic acid, onto nanocellulose. Human vision can identify the color associated with Fe II ions, and spectrophotometric methods can measure it with detection and quantification limits of 0.239 and 0.796 ppb, respectively. Pd(II) detection and quantification limits were 0.318 ppb and 1.06 ppb, respectively. The effects of various parameters on the detection of Fe(II) or Pd(II) ion content were investigated and optimized. The optical phenanthroline-nanocellulose (5-Phen) sensor could be reproduced multiple times and used with a higher capacity each time. The results demonstrated that the 5-Phen sensor could measure Fe(II) in human blood serum accurately and successfully even without any pre-concentration.

Functionalized MOF as a Sensitive Spectroscopic Probe for Hg2+, Co2+, and Al3+ Ions Detection in Aqueous Media.

A modified metal-organic framework (MOF) named Al-MIL-53-N=SA-Br was synthesized via a Schiff-base reaction between the MOFs (Al-MIL-53-NH2) and 5-bromo salicylaldehyde. The robust functionalized Al-MIL-53-N=SA-Br was used as a novel spectrophotometric sensor for detecting Hg2+, Co2+, and Al3+ ions. In a wide range of concentrations, the absorption spectral intensity of Al-MIL-53-N=SA-Br increased linearly upon increasing the concentration of Hg2+, Co2+, and Al3+ ions. The limit of detection (LOD) of the proposed Al-MIL-53-N=SA-Br sensor reached 1.52 ppm of Hg2+ ion (7.56 × 10-9 M). Therefore, this study introduces a novel ratiometric Hg2+, Co2+, and Al3+ ions chemosensor. Simple treatment using thiourea or ethylenediaminetetraacetic acid can remove the metal ions from the used sensor and use it many times with a high efficiency. In addition, the Al-MIL-53-N=SA-Br sensor has a high adsorption capacity for these metal ions. The design of the robust Al-MIL-53-N=SA-Br sensor provided high stability, reproducibility, selectivity, high sensitivity, and a facile sensing design. Furthermore, the good absorption spectral stability of Al-MIL-53-N=SA-Br in aqueous media, the broad linear in sensing, and the low LOD of the Hg2+, Co2+, and Al3+ ions show its high potential in determining these ions in real water.

A randomised trial comparing transurethral to percutaneous cystolithotripsy in boys.

OBJECTIVE: To compare the efficacy and morbidity of transurethral cystolithotripsy (TUCL) and percutaneous CL (PCCL) in the management of bladder stones in male children. PATIENTS AND METHODS: A total of 100 boys, aged <14 years with a single bladder or urethral stone of <30 mm, were randomised into two equal groups. Initial diagnostic urethro-cystoscopy and push back of urethral stones were done for patients in both groups. Patients in Group A had TUCL, while those in Group B had PCCL through a 20-F sheath using a 12-F nephroscope. The two groups were compared regarding preoperative criteria, intraoperative details, and postoperative outcomes. RESULTS: The patients in this study had a median (range) age of 36 (4-144) months and stone size of 10 (5-26) mm. There was no statistically significant difference between the two groups for preoperative criteria. The assigned procedure was successful in 48 (96%) patients in Group A and 49 (98%) in Group B (P = 1). Complications were encountered in 11 (22%) patients in Group A and five (10%) in Group B (P = 0.171). The median (range) operative time was 21.5 (4-90) min in Group A and 13 (5-70) min in Group B (P < 0.001). In all, 47 (94%) stones needed disintegration in Group A vs 22 (44%) in Group B (P < 0.001). CONCLUSION: Both techniques have comparable success and complications rates. However, PCCL has a shorter operative time and less need for stone disintegration.

Spectrophotometric and Fluorometric Methods for the Determination of Fe(III) Ions in Water and Pharmaceutical Samples.

Chemical sensors based on mesoporous silica nanotubes (MSNTs) for the quick detection of Fe(III) ions have been developed. The nanotubes' surface was chemically modified with phenolic groups by reaction of the silanol from the silica nanotubes surface with 3-aminopropyltriethoxysilane followed by reaction with 3-formylsalicylic acid (3-fsa) or 5-formylsalicylic acid (5-fsa) to produce the novel nanosensors. The color of the resultant 3-fsa-MSNT and 5-fsa-MSNT sensors changes once meeting a very low concentration of Fe(III) ions. Color changes can be seen by the naked eye and tracked with a smartphone or fluorometric or spectrophotometric techniques. Many experimental studies have been conducted to find out the optimum conditions for colorimetric and fluorometric determining of the Fe(III) ions by the two novel sensors. The response time, for the two sensors, that is necessary to achieve a steady spectroscopic signal was less than 15 s. The suggested methods were validated in terms of the lowest limit of detection (LOD), the lowest limit of quantification (LOQ), linearity, and precision according to International Conference on Harmonization (ICH) guidelines. The lowest limit of detection that was obtained from the spectrophotometric technique was 18 ppb for Fe(III) ions. In addition, the results showed that the two sensors can be used eight times after recycling using 0.1 M EDTA as eluent with high efficiency (90%). As a result, the two sensors were successfully used to determine Fe(III) in a variety of real samples (tap water, river water, seawater, and pharmaceutical samples) with great sensitivity and selectivity.

Taxonomic revision of the subgenus Eutricharaea Thomson in Egypt, with a key to the species and the description of two new species (Hymenoptera, Anthophila, Megachilidae, genus Megachile Latreille).

The subgenus Eutricharaea Thomson of the genus Megachile Latreille (Hymenoptera: Megachilidae) in Egypt is revised. Fifteen species are recognized, of which two are new: Megachile laniventris Praz sp. nov. and M. rufomandibularis Praz sp. nov. In addition, three unclear taxa known from few specimens in one sex are documented to facilitate future work. The following new synonymies are proposed: M. microxantha Cockerell 1937, M. privigna Rebmann 1968, and M. submucida Alfken 1926 are synonymized with M. leucostoma Prez 1907 (syn. nov.); M. blanda Rebmann 1968 with M. walkeri Dalla Torre 1896 (syn. nov.); M. uniformis Alfken 1934 (not M. uniformis Mitchell 1929) and the replacement name M. minutuloides Alfken 1936 with M. minutissima Radoszkowski 1876 (syn. nov.); and M. tkalcui Zanden 1996 with M. rugipuncta Alfken 1934 (syn. nov.). Lectotypes are designated for M. soikai Benoist 1961, M. rugipuncta, M. tenuistriga Alfken 1938, M. niveascopa Ferton 1908, and M. naevia Kohl 1906. The previously unknown males of M. impressipuncta Alfken 1934 and M. rugipuncta, as well as the undescribed female of M. soikai are described. Illustrated keys for both males and females are provided and DNA barcodes are published for most species.

Sensitive Determination of SARS-COV-2 and the Anti-hepatitis C Virus Agent Velpatasvir Enabled by Novel Metal-Organic Frameworks.

Herein, we report on the electrochemical determination of velpatasvir (VLP) as the main constituent of Epclusa, a SARS-COV-2 and anti-hepatitis C virus (HCV) agent, using a novel metal-organic framework (MOF). The NH2-MIL-53(Al) MOF was successfully modified with 5-bromo-salicylaldehyde to synthesize 5-BSA=N-MIL-53(Al) MOF. The synthesized MOF has been characterized using Fourier transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy, cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy. The modified MOF showed higher electrochemical activity and response than the bare NH2-MIL-53(Al) MOF. Compared to the bare carbon paste electrode (CPE), the 5-BSA=N-MIL-53(Al)/CPE platform was shown to enhance the electrochemical oxidation and detection of the anti-SARS-COV-2 and anti-HCV agent. Under optimized conditions, the 5-BSA=N-MIL-53(Al)/CPE platform showed a linear range of 1.11 × 10-6 to 1.11 × 10-7 and 1.11 × 10-7 to 25.97 × 10-6 M Britton-Robinson buffer (pH 7) with a detection limit and limit of quantification of 8.776 × 10-9 and 2.924 × 10-8 M, respectively. Repeatability, storage stability, and reproducibility in addition to selectivity studies and interference studies were conducted to illustrate the superiority of the electrode material. The study also included a highly accurate platform for the determination of VLP concentrations in both urine and plasma samples with reasonable recovery.

Mesopores silica nanotubes-based sensors for the highly selective and rapid detection of Fe2+ ions in wastewater, boiler system units and biological samples.

Mesopores silica nanotubes (MSNTs)-based chemical sensors for the rapid detection and of highly selective Fe2+ ions have been prepared. The novel nanosensors were prepared via immobilization of 1,10-phenanthroline-5-amine (PA) and bathophenanthroline (BP) onto the MSNTs. The resultant PA and BP sensors display high sensitivity for detection the Fe2+ ions in tap water, river water, sea water, two units in simple cycle power station, and biological samples. More interestingly, upon meeting ultra-trace amount of Fe2+ ions, a red complex appears at once. Color changes can be seen from the naked eye and tracked with a smartphone or spectrophotometric techniques. The response time that is necessary to achieve a stable signal was less than 15 s. The Univariate (Univar) calibration technique had been utilized for the determination of figures of merits. The detection limit obtained from the digital image analysis was 19 ppb (7.04 × 10-7 M) for Fe2+ ions, while the obtained from the spectrophotometric method was 6.7 ppb (2.48 × 10-7 M). Therefore, the two sensors had been successfully used in the determination of Fe2+ in several real samples with high sensitivity and selectivity. In addition, they can be used as a simple, rapid, and portable method to detect and quantify the pre rust in any cooler system.

The Economic Costs of Childhood Disability: A Literature Review.

BACKGROUND: This literature review investigates the economic costs of childhood disability analysing methodologies used and summarizing the burden worldwide comparing developed and developing countries. METHODS: Four electronic databases were searched. Studies were categorised according to country, perspective, methods of costing, disability category, and time horizon. Annual costs were converted to 2019 current US dollars then compared to the country's per capita current health expenditure (CHE) and gross domestic product (GDP). RESULTS: Of 2468 references identified, 20 were included in the review. Annual burden of childhood disability ranged ≈$450-69,500 worldwide. Childhood disability imposes a heavy economic burden on families, health systems, and societies. The reason for the wide range of costs is the variability in perspective, costs included, methods, and disability type. CONCLUSION: The annual societal costs for one disabled child could be up to the country's GDP per capita. The burden is heavier on households in developing countries as most of the costs are paid out-of-pocket leading to impoverishment of the whole family. Efforts should be directed to avoid preventable childhood disabilities and to support disabled children and their households to make them more independent and increase their productivity. More studies from developing countries are needed.

Critical Application of Adult Nephrolithometric Scoring Systems to Children Undergoing Mini-Percutaneous Nephrolithotomy.

Objective: To evaluate and compare the ability of the Guy's stone score (GSS), the S.T.O.N.E. nephrolithometry, and the Clinical Research Office of the Endourology Society (CROES) nomogram to predict the outcome of mini-percutaneous nephrolithotomy (MPNL) in children, and to identify which of the predictors involved in these scoring systems can separately affect this outcome. Patients and Methods: All children younger than 14 years who had MPNL in our center over a period of 3 years were included prospectively. Bivariate analyses were done to evaluate the associations of the three scoring systems and the predictors composing them with single-session stone clearance and complications. Receiver operating characteristic (ROC) curve analyses of the three scoring systems were conducted to evaluate and compare their abilities to predict the outcomes. Decision curve analyses for the three scoring systems were conducted to evaluate the clinical benefit of using each of them to predict stone clearance. Results: We consecutively enrolled 92 renal units in 89 children with a median age of 9.5 years. Single-session stone clearance was achieved in 76 (82.6%) renal units. Complications occurred with 19 (20.7%) procedures. Stone multiplicity (p = 0.043), staghorn stone (p = 0.007), prior stone treatment (p < 0.001), number of calices involved (p = 0.006), stone burden (p = 0.003), GSS (p < 0.001), S.T.O.N.E. nephrolithometry (p = 0.012), and CROES nomogram (p < 0.001) had significant associations with stone clearance. Only stone attenuation was significantly associated with complications (p = 0.031). For prediction of stone clearance, CROES nomogram demonstrated the greatest area under the ROC curve and the greatest net benefit on decision curve analyses. Conclusions: For children undergoing MPNL, CROES nomogram is the best to predict stone clearance. However, none of the studied scoring systems predicted complications efficiently.