Changes in wet bulb globe temperature and risk to heat-related hazards in Bangladesh.

The rise in temperatures and changes in other meteorological variables have exposed millions of people to health risks in Bangladesh, a densely populated, hot, and humid country. To better assess the threats climate change poses to human health, the wet bulb globe temperature (WBGT) is an important indicator of human heat stress. This study utilized high-resolution reanalysis data from the fifth-generation European Centre for Medium-Range Weather Forecasts (ECMWF ERA5) to analyze the spatiotemporal changes in outdoor WBGT across Bangladesh from 1979 to 2021, employing Liljegren's model. The study revealed an increase in the annual average WBGT by 0.08-0.5 °C per decade throughout the country, with a more pronounced rise in the southeast and northeast regions. Additionally, the number of days with WBGT levels associated with high and extreme risks of heat-related illnesses has shown an upward trend. Specifically, during the monsoon period (June to September), there has been an increase of 2-4 days per decade, and during the pre-monsoon period (March to May), an increase of 1-3 days per decade from 1979 to 2021. Furthermore, the results indicated that the escalation in WBGT has led to a five-fold increase in affected areas and a three-fold increase in days of high and extreme heat stress during the monsoon season in recent years compared to the earlier period. Trend and relative importance analyses of various meteorological variables demonstrated that air temperature is the primary driver behind Bangladesh's rising WBGT and related health risks, followed by specific humidity, wind speed, and solar radiation.

Spatiotemporal changes in future precipitation of Afghanistan for shared socioeconomic pathways.

Global warming induces spatially heterogeneous changes in precipitation patterns, highlighting the need to assess these changes at regional scales. This assessment is particularly critical for Afghanistan, where agriculture serves as the primary livelihood for the population. New global climate model (GCM) simulations have recently been released for the recently established shared socioeconomic pathways (SSPs). This requires evaluating projected precipitation changes under these new scenarios and subsequent policy updates. This research employed six GCMs from the CMIP6 to project spatial and temporal precipitation changes across Afghanistan under all SSPs, including SSP1-1.9, SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5. The employed GCMs were bias-corrected using the Global Precipitation Climatological Center's (GPCC) monthly gridded precipitation data with a 1.0° spatial resolution. Subsequently, the climate change factor was calculated to assess precipitation changes for both the near future (2020-2059) and the distant future (2060-2099). The bias-corrected projections' multi-model ensemble (MME) revealed increased precipitation across most of Afghanistan for SSPs with higher emissions scenarios. The bias-corrected simulations showed a substantial increase in summer precipitation of around 50%, projected under SSP1-1.9 in the southwestern region, while a decline of over 50% is projected in the northwestern region until 2100. The annual precipitation in the northwest region was projected to increase up to 15% for SSP1-2.6. SSP2-4.5 showed a projected annual precipitation increase of around 20% in the southwestern and certain eastern regions in the far future. Furthermore, a substantial rise of approximately 50% in summer precipitation under SSP3-7.0 is expected in the central and western regions in the far future. However, it is crucial to note that the projected changes exhibit considerable uncertainty among different GCMs.

Selecting the optimal gridded climate dataset for Nigeria using advanced time series similarity algorithms.

Choosing a suitable gridded climate dataset is a significant challenge in hydro-climatic research, particularly in areas lacking long-term, reliable, and dense records. This study used the most common method (Perkins skill score (PSS)) with two advanced time series similarity algorithms, short time series distance (STS), and cross-correlation distance (CCD), for the first time to evaluate, compare, and rank five gridded climate datasets, namely, Climate Research Unit (CRU), TERRA Climate (TERRA), Climate Prediction Center (CPC), European Reanalysis V.5 (ERA5), and Climatologies at high resolution for Earth's land surface areas (CHELSA), according to their ability to replicate the in situ rainfall and temperature data in Nigeria. The performance of the methods was evaluated by comparing the ranking obtained using compromise programming (CP) based on four statistical criteria in replicating in situ rainfall, maximum temperature, and minimum temperature at 26 locations distributed over Nigeria. Both methods identified CRU as Nigeria's best-gridded climate dataset, followed by CHELSA, TERRA, ERA5, and CPC. The integrated STS values using the group decision-making method for CRU rainfall, maximum and minimum temperatures were 17, 10.1, and 20.8, respectively, while CDD values for those variables were 17.7, 11, and 12.2, respectively. The CP based on conventional statistical metrics supported the results obtained using STS and CCD. CRU's Pbias was between 0.5 and 1; KGE ranged from 0.5 to 0.9; NSE ranged from 0.3 to 0.8; and NRMSE between - 30 and 68.2, which were much better than the other products. The findings establish STS and CCD's ability to evaluate the performance of climate data by avoiding the complex and time-consuming multi-criteria decision algorithms based on multiple statistical metrics.

Heatwaves in Peninsular Malaysia: a spatiotemporal analysis.

One of the direct and unavoidable consequences of global warming-induced rising temperatures is the more recurrent and severe heatwaves. In recent years, even countries like Malaysia seldom had some mild to severe heatwaves. As the Earth's average temperature continues to rise, heatwaves in Malaysia will undoubtedly worsen in the future. It is crucial to characterize and monitor heat events across time to effectively prepare for and implement preventative actions to lessen heatwave's social and economic effects. This study proposes heatwave-related indices that take into account both daily maximum (Tmax) and daily lowest (Tmin) temperatures to evaluate shifts in heatwave features in Peninsular Malaysia (PM). Daily ERA5 temperature dataset with a geographical resolution of 0.25° for the period 1950-2022 was used to analyze the changes in the frequency and severity of heat waves across PM, while the LandScan gridded population data from 2000 to 2020 was used to calculate the affected population to the heatwaves. This study also utilized Sen's slope for trend analysis of heatwave characteristics, which separates multi-decadal oscillatory fluctuations from secular trends. The findings demonstrated that the geographical pattern of heatwaves in PM could be reconstructed if daily Tmax is more than the 95th percentile for 3 or more days. The data indicated that the southwest was more prone to severe heatwaves. The PM experienced more heatwaves after 2000 than before. Overall, the heatwave-affected area in PM has increased by 8.98 km2/decade and its duration by 1.54 days/decade. The highest population affected was located in the central south region of PM. These findings provide valuable insights into the heatwaves pattern and impact.

Contamination and ecological risk assessment of Cr, As, Cd and Pb in water and sediment of the southeastern Bay of Bengal coast in a developing country.

Safe levels of heavy metals in the surface water and sediment of the eastern Bay of Bengal coast have not been universally established. Current study characterized heavy metals such as arsenic (As), chromium (Cr), cadmium (Cd) and lead (Pb) in surface water and sediments of the most important fishing resource at the eastern Bay of Bengal coast, Bangladesh. Both water and sediment samples were analyzed using inductively coupled plasma mass spectrometer. Considering both of the seasons, the mean concentrations of Cr, As, Cd, and Pb in water samples were 33.25, 8.14, 0.48, and 21.14 µg/L, respectively and in sediment were 30.47, 4.48, 0.20, and 19.98 mg/kg, respectively. Heavy metals concentration in water samples surpassed the acceptable limits of usable water quality, indicating that water from this water resource is not safe for drinking, cooking, bathing, and any other uses. Enrichment factors also directed minor enrichment of heavy metals in sediment of the coast. Other indexes for ecological risk assessment such as pollution load index (PLI), contamination factor (CF), geoaccumulation index (Igeo), modified contamination degree (mCd), and potential ecological risk index (PERI) also indicated that sediment of the coastal watershed was low contamination. In-depth inventorying of heavy metals in both water and sediment of the study area are required to determine ecosystem health for holistic risk assessment and management.

Development of global monthly dataset of CMIP6 climate variables for estimating evapotranspiration.

Reliable projection of evapotranspiration (ET) is important for planning sustainable water management for the agriculture field in the context of climate change. A global dataset of monthly climate variables was generated to estimate potential ET (PET) using 14 General Circulation Models (GCMs) for four main shared socioeconomic pathways (SSPs). The generated dataset has a spatial resolution of 0.5° × 0.5° and a period ranging from 1950 to 2100 and can estimate historical and future PET using the Penman-Monteith method. Furthermore, this dataset can be applied to various PET estimation methods based on climate variables. This paper presents that the dataset generated to estimate future PET could reflect the greenhouse gas concentration level of the SSP scenarios in latitude bands. Therefore, this dataset can provide vital information for users to select appropriate GCMs for estimating reasonable PETs and help determine bias correction methods to reduce between observation and model based on the scale of climate variables in each GCM.

Seasonal correlation of meteorological parameters and PM2.5 with the COVID-19 confirmed cases and deaths in Baghdad, Iraq.

The COVID-19 pandemic was a serious global health emergency in 2020 and 2021. This study analyzed the seasonal association of weekly averages of meteorological parameters, such as wind speed, solar radiation, temperature, relative humidity, and air pollutant PM2.5, with confirmed COVID-19 cases and deaths in Baghdad, Iraq, a major megacity of the Middle East, for the period June 2020 to August 2021. Spearman and Kendall correlation coefficients were used to investigate the association. The results showed that wind speed, air temperature, and solar radiation have positive and strong correlations with the confirmed cases and deaths in the cold season (autumn and winter 2020-2021). The total COVID-19 cases negatively correlated with relative humidity but were not significant in all seasons. Besides, PM2.5 strongly correlated with COVID-19 confirmed cases for the summer of 2020. The death distribution by age group showed the highest deaths for those aged 60-69. The highest number of deaths was 41% in the summer of 2020. The study provided useful information about the COVID-19 health emergency and meteorological parameters, which can be used for future health disaster planning, adopting prevention strategies and providing healthcare procedures to protect against future infraction transmission.

Predicted changes in future precipitation and air temperature across Bangladesh using CMIP6 GCMs.

Understanding spatiotemporal variability in precipitation and temperature and their future projections is critical for assessing environmental hazards and planning long-term mitigation and adaptation. In this study, 18 Global Climate Models (GCMs) from the most recent Coupled Model Intercomparison Project phase 6 (CMIP6) were employed to project the mean annual, seasonal, and monthly precipitation, maximum air temperature (Tmax), and minimum air temperature (Tmin) in Bangladesh. The GCM projections were bias-corrected using the Simple Quantile Mapping (SQM) technique. Using the Multi-Model Ensemble (MME) mean of the bias-corrected dataset, the expected changes for the four Shared Socioeconomic Pathways (SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5) were evaluated for the near (2015-2044), mid (2045-2074), and far (2075-2100) futures in comparison to the historical period (1985-2014). In the far future, the anticipated average annual precipitation increased by 9.48%, 13.63%, 21.07%, and 30.90%, while the average Tmax (Tmin) rose by 1.09 (1.17), 1.60 (1.91), 2.12 (2.80), and 2.99 (3.69) °C for SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5, respectively. According to predictions for the SSP5-8.5 scenario in the distant future, there is expected to be a substantial rise in precipitation (41.98%) during the post-monsoon season. In contrast, winter precipitation was predicted to decrease most (11.12%) in the mid-future for SSP3-7.0, while to increase most (15.62%) in the far-future for SSP1-2.6. Tmax (Tmin) was predicted to rise most in the winter and least in the monsoon for all periods and scenarios. Tmin increased more rapidly than Tmax in all seasons for all SSPs. The projected changes could lead to more frequent and severe flooding, landslides, and negative impacts on human health, agriculture, and ecosystems. The study highlights the need for localized and context-specific adaptation strategies as different regions of Bangladesh will be affected differently by these changes.

Machine learning algorithms for high-resolution prediction of spatiotemporal distribution of air pollution from meteorological and soil parameters.

This study uses machine learning (ML) models for a high-resolution prediction (0.1°×0.1°) of air fine particular matter (PM2.5) concentration, the most harmful to human health, from meteorological and soil data. Iraq was considered the study area to implement the method. Different lags and the changing patterns of four European Reanalysis (ERA5) meteorological variables, rainfall, mean temperature, wind speed and relative humidity, and one soil parameter, the soil moisture, were used to select the suitable set of predictors using a non-greedy algorithm known as simulated annealing (SA). The selected predictors were used to simulate the temporal and spatial variability of air PM2.5 concentration over Iraq during the early summer (May-July), the most polluted months, using three advanced ML models, extremely randomized trees (ERT), stochastic gradient descent backpropagation (SGD-BP) and long short-term memory (LSTM) integrated with Bayesian optimizer. The spatial distribution of the annual average PM2.5 revealed the population of the whole of Iraq is exposed to a pollution level above the standard limit. The changes in temperature and soil moisture and the mean wind speed and humidity of the month before the early summer can predict the temporal and spatial variability of PM2.5 over Iraq during May-July. Results revealed the higher performance of LSTM with normalized root-mean-square error and Kling-Gupta efficiency of 13.4% and 0.89, compared to 16.02% and 0.81 for SDG-BP and 17.9% and 0.74 for ERT. The LSTM could also reconstruct the observed spatial distribution of PM2.5 with MapCurve and Cramer's V values of 0.95 and 0.91, compared to 0.9 and 0.86 for SGD-BP and 0.83 and 0.76 for ERT. The study provided a methodology for forecasting spatial variability of PM2.5 concentration at high resolution during the peak pollution months from freely available data, which can be replicated in other regions for generating high-resolution PM2.5 forecasting maps.

Projection of temperature extremes of Egypt using CMIP6 GCMs under multiple shared socioeconomic pathways.

Global warming has amplified the frequency of temperature extremes, especially in hot dry countries, which could have serious consequences for the natural and built environments. Egypt is one of the hot desert climate regions that are more susceptible to climate change and associated hazards. This study attempted to project the changes in temperature extremes for three Shared Socioeconomic Pathways (SSPs), namely, SSP1-2.6, SSP2-4.5, and SSP5-8.5 and two future periods (early future: 2020-2059 and late future: 2060-2099) by using daily maximum (Tmax) and minimum temperature (Tmin) of general circulation model (GCMs) of Coupled Model Inter-comparison Project phase 6 (CMIP6). The findings showed that most temperature extreme indices would increase especially by the end of the century. In the late future, the change in the mean Tmin (4.3 °C) was projected to be higher than the mean Tmax (3.7 °C). Annual maximum Tmax, temperature above 95th percentile of Tmax, and the number of hot days above 40 °C and 45 °C were projected to increase in the range 3.0‒5.4 °C, 1.5‒4.8 °C, 20‒95 days, and 10‒52 days, respectively. In contrast, the annual minimum of Tmin, temperature below the 5th percentile, and the annual percentage of cold nights were projected to change in the range of 2.95‒5.0 °C, 1.4‒3.6 °C, and - 0.1‒0.1%, respectively. In all the cases, the lowest changes would be for SSP1-2.6 in the early period and the greatest changes for SSP5-8.5 in the late period. The study indicates that the country is likely to experience a rise in hot extremes and a decline in cold extremes. Therefore, Egypt should take long-term adaptation plans to build social resiliency to rising hot extremes.

Adaptation measures under the impacts of climate and land-use/land-cover changes using HSPF model simulation: Application to Gongola river basin, Nigeria.

Recently, there is an upsurge in flood emergencies in Nigeria, in which their frequencies and impacts are expected to exacerbate in the future due to land-use/land cover (LULC) and climate change stressors. The separate and combined forces of these stressors on the Gongola river basin is feebly understood and the probable future impacts are not clear. Accordingly, this study uses a process-based watershed modelling approach - the Hydrological Simulation Program FORTRAN (HSPF) (i) to understand the basin's current and future hydrological fluxes and (ii) to quantify the effectiveness of five management options as adaptation measures for the impacts of the stressors. The ensemble means of the three models derived from the Coupled Model Intercomparison Project Phase 5 (CMIP5) are employed for generating future climate scenarios, considering three distinct radiative forcing peculiar to the study area. Also, the historical and future LULC (developed from the hybrid of Cellular Automata and Markov Chain model) are used to produce the LULC scenarios for the basin. The effective calibration, uncertainty and sensitivity analyses are used for optimising the parameters of the model and the validated result implies a plausible model with efficiency of up to 75 %. Consequently, the results of individual impacts of the stressors yield amplification of the peak flows, with more profound impacts from climate stressor than the LULC. Therefore, the climate impact may trigger a marked peak discharge that is 48 % higher as compared to the historical peak flows which are equivalent to 10,000-year flood event. Whilst the combine impacts may further amplify this value by 27 % depending on the scenario. The proposed management interventions such as planned reforestation and reservoir at Dindima should attenuate the disastrous peak discharges by almost 36 %. Furthermore, the land management option should promote the carbon-sequestering project of the Paris agreement ratified by Nigeria. While the reservoir would serve secondary functions of energy production; employment opportunities, aside other social aspects. These measures are therefore expected to mitigate feasibly the negative impacts anticipated from the stressors and the approach can be employed in other river basins in Africa confronted with similar challenges.

Sources and management of marine litter pollution along the Bay of Bengal coast of Bangladesh.

Marine debris is often detected everywhere in the oceans after it enters the marine ecosystems from various sources. Marine litter pollution is a major threat to the marine ecosystem in Bangladesh. A preliminary study was conducted to identify the sources of marine litter (plastics, foamed plastic, clothes, glass, ceramic, metals, paper, and cardboard) along the Bay of Bengal coast. From the observations, the range of abundance of the collected marine litter was 0.14-0.58 items/m2. From the ten sampling sites, the highest amount of marine litter was observed for aluminium cans (3500), followed by plastic bottles (3200). The spatial distribution pattern indicated that all the study areas had beach litter of all types of materials. The present investigation showed that plastics were the dominating pollutants in the marine ecosystem in Bangladesh. The clean-coast index (CCI) value indicated that the Cox's Bazar coast was clean to dirty class. The abundance, distribution, and pollution of marine litter along the coastal belts pose a potential threat to the entire ecosystem. This study will help come up with ways to manage and get rid of marine litter along the coast in an effective way.

Developing a high-resolution gridded rainfall product for Bangladesh during 1901-2018.

A high-resolution (1 km × 1 km) monthly gridded rainfall data product during 1901-2018, named Bangladesh Gridded Rainfall (BDGR), was developed in this study. In-situ rainfall observations retrieved from a number of sources, including national organizations and undigitized data from the colonial era, were used. Leave-one-out cross-validation was used to assess product's ability to capture spatial and temporal variability. The results revealed spatial variability of the percentage bias (PBIAS) in the range of -2 to 2%, normalized root mean square error (NRMSE) <20%, and correlation coefficient (R2) >0.88 at most of the locations. The temporal variability in mean PBIAS for 1901-2018 was in the range of -4.5 to 4.3%, NRMSE between 9 and 19% and R2 in the range of 0.87 to 0.95. The BDGR also showed its capability in replicating temporal patterns and trends of observed rainfall with greater accuracy. The product can provide reliable insights regarding various hydrometeorological issues, including historical floods, droughts, and groundwater recharge for a well-recognized global climate hotspot, Bangladesh.

Farasan Island of Saudi Arabia confronts the measurable impacts of global warming in 45 years.

Coastal vulnerability assessment is the key to coastal management and sustainable development. Sea level rise (SLR) and anthropogenic activities have triggered more extreme climatic events and made the coastal region vulnerable in recent decades. Many parts of the world also noticed increased sediment deposition, tidal effects, and changes in the shoreline. Farasan Island, located in the south-eastern part of Saudi Arabia, experienced changes in sediment deposition from the Red Sea in recent years. This study used Digital Shoreline Analysis System (DSAS) to delineate the shoreline changes of Farasan Island during 1975-2020. Multi-temporal Landsat data and DSAS were used for shoreline calculation based on endpoint rate (EPR) and linear regression. Results revealed an increase in vegetation area on the island by 17.18 km2 during 1975-1989 and then a decrease by 69.85 km2 during 1990-2020. The built-up land increased by 5.69 km2 over the study period to accommodate the population growth. The annual temperature showed an increase at a rate of 0.196 °C/year. The sea-level rise caused a shift in the island's shoreline and caused a reduction of land by 80.86 km2 during 1975-2020. The highly influenced areas by the environmental changes were the north, central, northwest, southwest, and northeast parts of the island. Urban expansion and sea-level rise gradually influence the island ecosystem, which needs proper attention, management, policies, and awareness planning to protect the environment of Farasan Island. Also, the study's findings could help develop new strategies and plan climate change adaptation.

Thermal bioclimatic indicators over Southeast Asia: present status and future projection using CMIP6.

Mapping potential changes in bioclimatic characteristics are critical for planning mitigation goals and climate change adaptation. Assessment of such changes is particularly important for Southeast Asia (SEA) - home to global largest ecological diversity. Twenty-three global climate models (GCMs) of Coupled Model Intercomparison Project Phase 6 (CMIP6) were used in this study to evaluate changes in 11 thermal bioclimatic indicators over SEA for two shared socioeconomic pathways (SSPs), 2-4.5 and 5-8.5. Spatial changes in the ensemble mean, 5th, and 95th percentile of each indicator for near (2020-2059) and far (2060-2099) periods were examined in order to understand temporal changes and associated uncertainty. The results indicated large spatial heterogeneity and temporal variability in projected changes of bioclimatic indicators. A higher change was projected for mainland SEA in the far future and less in maritime region during the near future. At the same time, uncertainty in the projected bioclimatic indices was higher for mainland than maritime SEA. Analysis of mean multi-model ensemble revealed a change in mean temperature ranged from - 0.71 to 3.23 °C in near and from 0.00 to 4.07 °C in far futures. The diurnal temperature range was projected to reduce over most of SEA (ranging from - 1.1 to - 2.0 °C), while isothermality is likely to decrease from - 1.1 to - 4.6%. A decrease in isothermality along with narrowing of seasonality indicated a possible shift in climate, particularly in the north of mainland SEA. Maximum temperature in the warmest month/quarter was projected to increase a little more than the coldest month/quarter and the mean temperature in the driest month to increase more than the wettest month. This would cause an increase in the annual temperature range in the future.

Vulnerability of Australia to heatwaves: A systematic review on influencing factors, impacts, and mitigation options.

BACKGROUND: Heatwaves have received major attention globally due to their detrimental effects on human health and the environment. The frequency, duration, and severity of heatwaves have increased recently due to changes in climatic conditions, anthropogenic forcing, and rapid urbanization. Australia is highly vulnerable to this hazard. Although there have been an increasing number of studies conducted in Australia related to the heatwave phenomena, a systematic review of heatwave vulnerability has rarely been reported in the literature. OBJECTIVES: This study aims to provide a systematic and overarching review of the different components of heatwave vulnerability (e.g., exposure, sensitivity, and adaptive capacity) in Australia. METHODS: A systematic review was conducted using the PRISMA protocol. Peer-reviewed English language articles published between January 2000 and December 2021 were selected using a combination of search keywords in Web of Science, Scopus, and PubMed. Articles were critically analyzed based on three specific heatwave vulnerability components: exposure, sensitivity, and adaptive capacity. RESULTS AND DISCUSSION: A total of 107 articles meeting all search criteria were chosen. Although there has been an increasing trend of heat-related studies in Australia, most of these studies have concentrated on exposure and adaptive capacity components. Evidence suggests that the frequency, severity, and duration of heatwaves in Australian cities has been increasing, and that this is likely to continue under current climate change scenarios. This study noted that heatwave vulnerability is associated with geographical and climatic factors, space, time, socioeconomic and demographic factors, as well as the physiological condition of people. Various heat mitigation and adaptation measures implemented around the globe have proven to be efficient in reducing the impacts of heatwaves. CONCLUSION: This study provides increased clarity regarding the various drivers of heatwave vulnerability in Australia. Such knowledge is crucial in informing extreme heat adaptation and mitigation planning.

Differences in extremes and uncertainties in future runoff simulations using SWAT and LSTM for SSP scenarios.

This study compared the performance of Long Short-Term Memory networks (LSTM) and Soil Water Assessment Tool (SWAT) in simulating observed runoff and projecting future runoff using 11 CMIP6 GCMs. The projected runoff was estimated for two Shared Socioeconomic Pathways (SSPs), 2-4.5 and 5-8.5 for near (2021-2060) and far (2061-2100) futures, respectively. The biases in GCM simulated climate variables were corrected using quantile mapping considering observations at 6 weather stations as reference data over the historical period (1985-2014). Five evaluation metrics were used to quantify the GCM's and hydrological models' capability to reconstruct climate variables and runoff in the Yeongsan Basin of South Korea. Uncertainties in LSTM and SWAT simulated runoff for the historical and projected periods were quantified using Bayesian Model Averaging (BMA) and reliability ensemble averaging (REA), respectively. The results showed significant improvement in bias-corrected GCMs in replicating observations in terms of all evaluation metrics. The extreme runoff estimated using general extreme value (GEV) distribution revealed the better capability of LSTM than SWAT in reproducing observed runoff at all gauging locations. The SWAT projected an increase (17.7%) while LSTM projected a decrease (-13.6%) in the future runoff for both SSPs at most locations. The uncertainty in LSTM simulated runoff was lower than in SWAT runoff at all stations for the historical period. However, the uncertainty in SWAT projected runoff was lower than LSTM projected runoff for both SSPs. This study helps assessing the ability of deep-learning versus physically-based models in hydrological modeling and therefore opens new perspectives for hydrological modeling applications.

Spatiotemporal changes in aerosols over Bangladesh using 18 years of MODIS and reanalysis data.

In this study, combined Dark Target and Deep Blue (DTB) aerosol optical depth at 550 nm (AOD550 nm) data the Moderate Resolution Imaging Spectroradiometer (MODIS) flying on the Terra and Aqua satellites during the years 2003-2020 are used as a reference to assess the performance of the Copernicus Atmosphere Monitoring Services (CAMS) and the second version of Modern-Era Retrospective analysis for Research and Applications (MERRA-2) AOD over Bangladesh. The study also investigates long-term spatiotemporal variations and trends in AOD, and determines the relative contributions from different aerosol species (black carbon: BC, dust, organic carbon: OC, sea salt: SS, and sulfate) and anthropogenic emissions to the total AOD. As the evaluations suggest higher accuracy for CAMS than for MERRA-2, CAMS is used for further analysis of AOD over Bangladesh. The annual mean AOD from both CAMS and MODIS DTB is high (>0.60) over most parts of Bangladesh except for the eastern areas of Chattogram and Sylhet. Higher AOD is observed in spring and winter than in summer and autumn, which is mainly due to higher local anthropogenic emissions during the winter to spring season. Annual trends from 2003-2020 show a significant increase in AOD (by 0.006-0.014 year-1) over Bangladesh, and this increase in AOD was more evident in winter and spring than in summer and autumn. The increasing total AOD is caused by rising anthropogenic emissions and accompanied by changes in aerosol species (with increased OC, sulfate, and BC). Overall, this study improves understanding of aerosol pollution in Bangladesh and can be considered as a supportive document for Bangladesh to improve air quality by reducing anthropogenic emissions.

Predicting daily soil temperature at multiple depths using hybrid machine learning models for a semi-arid region in Punjab, India.

Prediction of soil temperature (ST) at multiple depths is important for maintaining the physical, chemical, and biological activities in soil for various scientific aspects. The present study was conducted in a semi-arid region of Punjab to predict the daily ST at 5-cm (ST5), 15-cm (ST15), and 30-cm (ST30) soil depths by employing the three-hybrid machine learning (ML) paradigms, i.e. support vector machine (SVM), multilayer perceptron (MLP), adaptive neuro-fuzzy inference system (ANFIS) optimized with slime mould algorithm (SMA), particle swarm optimization (PSO), and spotted hyena optimizer (SHO) algorithms. Five scenarios with different input variables were constructed using daily meteorological parameters, and the optimal one was extracted by exploiting the GT (gamma test). The feasibility of the proposed hybrid SVM, MLP, and ANFIS models was inspected based on performance metrics and visual interpretation. According to the results, the SVM-SMA model yields better estimates than other models at 5-cm, 15-cm, and 30-cm soil depths, respectively, for scenario 5 in the validation phase. Furthermore, conferring to the results, the SMA algorithm-based SVM model had lower (higher) values of mean absolute error, root mean square error, and index of scattering (Nash-Sutcliffe efficiency, coefficient of correlation, and Willmott index of agreement) and proved the better feasibility of SVM models in predicting daily ST at multiple depths on the study site.

Uncertainties in evapotranspiration projections associated with estimation methods and CMIP6 GCMs for South Korea.

This study compared the performance capabilities of three potential evapotranspiration (PET) methods, Thornthwaite (TW), Hargreaves and Samani (HS), and Penman-Monteith (PM), to simulate historical and future daily PET levels in South Korea using climate variables from Coupled Model Intercomparison Project 6 (CMIP6) Global Climate Models (GCMs). Five evaluation metrics were used to quantify the reproducibility of the climate variables and PETs at ten stations in South Korea for the historical period used here (1985-2014). The changes and uncertainty associated with the changes in PET in the near (2031-2060) and far (2071-2100) futures were calculated for two shared socioeconomic pathways (SSPs) of 2-4.5 and 5-8.5. As a result, PETs estimated using the three methods for the historical period showed high performance in terms of five evaluation metrics. Overall, PETs showed an increase for both the future periods and the SSPs. The PET estimated using the PM method showed the greatest increase, while that estimated using HS showed the most modest increase in the future. The PM method also showed the highest reliability and lowest uncertainty in the PET estimations, while the opposite was true for HS. This study contributes to our understanding of rational PET methods by which to calculate hydrological factors such as drought indexes for future periods via GCM simulations.