Facile extraction and determination of organophosphorus pesticides using poly (8-hydroxyquinoline) functionalized magnetic multi-walled carbon nanotubes nanocomposite in water, fruits, and vegetables samples.

This study presents a dispersive micro-solid phase extraction (D-µ-SPE) approach for extracting and determining of two organophosphorus pesticides (OPPs), including diazinon and chlorpyrifos as model analytes in various samples. For this purpose, we synthesized, characterized, and utilized magnetic multi-walled carbon nanotubes coated with poly 8-hydroxyquinoline (MWCNTs/Fe3O4@PHQ) as a novel sorbent. The impact of various parameters, including sorbent type, sample pH, sample volume, sorbent amount, desorption solvent (type and volume), extraction time, and ionic strength on the extraction efficiency was investigated and optimized. Following the extraction, the desorbed pesticides in acetone were analyzed using gas chromatography with an FID detector. Under the optimized experimental conditions, the proposed method showed excellent linearity in the range of 3-1000 µg/L, low detection limit (0.9-1.5 µg/L), good relative recoveries (86-101.5 %), and high precision (RSD < 6.5 %). Finally, the applicability of this method was evaluated by analyzing the target OPPs in a variety of real samples, and obtained satisfactory results.

Dispersive magnetic solid phase extraction of triazole fungicides based on polybenzidine/magnetic nanoparticles in environmental samples.

A polybenzidine-modified Fe3O4@SiO2 nanocomposite was successfully synthesized through a chemical oxidation method and employed as a novel sorbent in dispersive magnetic solid phase extraction (DMSPE) for the preconcentration and determination of three triazole fungicides (TFs), namely diniconazole, tebuconazole, and triticonazole in river water, rice paddy soil, and grape samples. The synthesis method involved a polybenzidine self-assembly coating on Fe3O4@SiO2 magnetic composite. Characterization techniques such as FT-IR, XRD, FESEM, EDX, and VSM were used to confirm the correctness of the synthesized nano-sorbent. The target TFs were determined in actual samples using the synthesized nanocomposite sorbent in combination with gas chromatography-flame ionization detection (FID). Several variables were carefully optimized , including the sample pH, sorbent dosage, extraction time, ionic strength, and desorption condition (solvent type, volume, and time). Under the optimized experimental conditions, the method exhibited linearity in the concentration range 5-1000 ng mL-1 for triticonazole and 2-1000 ng mL-1 for diniconazole and tebuconazole. The limits of detection (LOD) for the three TFs were in the range 0.6-1.5 ng mL-1. The method demonstrated acceptable precision with intra-day and inter-day relative standard deviation (RSD) values of less than 6.5%. The enrichment factors ranged from 248 to 254. Finally, the method applicability was evaluated by determining TFs in river water, rice paddy soil, and grape samples with recoveries in the range 90.5-106, indicating that the matrix effect was negligible in the proposed DMSPE procedure.

Electrically assisted liquid-phase microextraction combined with capillary electrophoresis for quantification of propranolol enantiomers in human body fluids.

In this study, electromembrane extraction (EME) combined with cyclodextrin (CD)-modified capillary electrophoresis (CE) was applied for the extraction, separation, and quantification of propranolol (PRO) enantiomers from biological samples. The PRO enantiomers were extracted from aqueous donor solutions, through a supported liquid membrane (SLM) consisting of 2-nitrophenyl octyl ether (NPOE) impregnated on the wall of the hollow fiber, and into a 20-µL acidic aqueous acceptor solution into the lumen of hollow fiber. Important parameters affecting EME efficiency such as extraction voltage, extraction time, pH of the donor and acceptor solutions were optimized using a Box-Behnken design (BBD). Then, under these optimized conditions, the acceptor solution was analyzed using an optimized CD-modified CE. Several types of CD were evaluated and best results were obtained using a fused-silica capillary with ammonium acetate (80 mM, pH 2.5) containing 8 mM hydroxypropyl-ß-CD as a chiral selector, applied voltage of 18 kV, and temperature of 20°C. The relative recoveries were obtained in the range of 78-95%. Finally, the performance of the present method was evaluated for the extraction and determination of PRO enantiomers in real biological samples.

Combination of graphene oxide-based solid phase extraction and electro membrane extraction for the preconcentration of chlorophenoxy acid herbicides in environmental samples.

Combination of different extraction methods is an interesting and debatable work in the field of sample preparation. In the current study, for the first time, solid phase extraction combined with electro membrane extraction (SPE-EME) was developed for ultra-preconcentration and determination of chlorophenoxy acid herbicides in environmental samples using capillary electrophoresis (CE). In the mentioned method, first, a 100mL of chlorophenoxy acid herbicides (2-methyl-4-chlorophenoxyacetic acid (MCPA), 2-(2,4-dichlorophenoxy) propanoic acid (2,4-DP) and 2-(4-chloro-2-methylphenoxy) propanoic acid (MCPP)) was passed through a column of graphene oxide as a solid phase, and then the adsorbed herbicides were eluted by 4.0mL of 8% acetic acid (HOAC) in methanol. Then, the elution solvent was evaporated and the herbicides residue was dissolved in 4.0mL of double distilled water (pH 9.0). Afterwards, the herbicides in 4.0mL of the aqueous solution were transferred to an EME glass vial. In the EME step, the herbicides were extracted from the sample solution into the basic acceptor solution (pH 13.0) under electrical potential, which was held inside the lumen of the fiber with 1-octanol as the supported liquid membrane (SLM). Under the optimized conditions, high enrichment factors were obtained in the range of 1950-2000. The limits of quantification (LOQs) and method detection limits (MDLs) were obtained in the range of 1.0-1.5 and 0.3-0.5ngmL(-1), respectively. Finally, the performance of the present method was evaluated for extraction and determination of chlorophenoxy acid herbicides in environmental samples.

A new method for the enhancement of electromembrane extraction efficiency using carbon nanotube reinforced hollow fiber for the determination of acidic drugs in spiked plasma, urine, breast milk and wastewater samples.

A new design of low voltage electromembrane extraction (EME) using carbon nanotube reinforced hollow fiber was developed for the determination of acidic drugs in biological and wastewater samples. The supported liquid membrane (SLM) with carbon nanotubes as the sorbent interface was used in this research. CNTs have large surface area and high adsorption capacity for a wide range of organic and inorganic species. Therefore, the presence of CNTs in SLM increased the overall analyte partition coefficient in the membrane and lead to enhancement in analyte transport. Optimization of the variables affecting this method was carried out in order to achieve the best extraction efficiency. Ibuprofen and naproxen, nonsteroid anti-inflammatory drugs (NSAIDs), were selected as model acidic drugs. Optimal extractions were accomplished with 1-octanol with 3.0 mg mL(-1) CNTs as the SLM, with 5V as the driving force, and with pH 7.4 in donor and pH 12 in acceptor solutions. Equilibrium extraction conditions were obtained after 10 min of operation with the whole assembly agitated at 500 rpm. Under the optimized extraction conditions, the proposed EME technique provided good linearity (>0.998), repeatability (RSD=2.7-3.2), low limits of detection (1-3 ng mL(-1)), excellent preconcentration (PF=180-188) and high recoveries (90-94%). In comparison with the conventional EME method, this method showed better results (lower voltage, higher preconcentration factors and higher recoveries). Finally, the developed method was successfully used for the determination of ibuprofen and naproxen in different spiked matrices including plasma, urine, breast milk and wastewater samples.

Simultaneous determination of acidic and basic drugs using dual hollow fibre electromembrane extraction combined with CE.

The simultaneous extraction of acidic and basic drugs from biological samples is a significant challenge for sample preparation. A novel and efficient method named dual hollow fibre electromembrane extraction combined with CE was applied for the simultaneous extraction and preconcentration of acidic and basic drugs in a single step. Under applied potential of 40 V during the extraction, ibuprofen as an acidic drug and thebaine as a basic drug migrated from a 4 mL aqueous sample solution at neutral pH into 20 µL of each basic (pH 12.5) and acidic (pH 2.0) acceptor phase, respectively; 1-octanol and 2-nitrophenyl octyl ether were immobilised in the pores of anodic and cathodic hollow fibres as supported liquid membranes, respectively. A Box-Behnken design and the response surface methodology were used for the optimisation of different parameters on the extraction efficiency. Under the optimised conditions, the enrichment factors were between 150 and 170 and also the LODs ranged from 3 to 7 ng/mL in different samples. The method was reproducible so that intra- and inter-day RSDs% (n = 5) were less than 5.9%. Finally, the method was successfully applied for the simultaneous extraction and determination of acidic and basic drugs from plasma and urine samples.