Model systems in heterogeneous catalysis: towards the design and understanding of structure and electronic properties.

We discuss in this paper two case studies related to nano-particle catalyst systems. One concerns a model system for the Cr/SiO2 Phillips catalyst for ethylene polymerization and here we present XPS data to complement the previously published TPD, IRAS and reactivity studies to elucidate the electronic structure of the system in some detail. The second case study provides additional information on Au nano-particles supported on ultrathin MgO(100)/Ag(100) films where we had observed a specific activity of the particle's rim at the metal-oxide interface with respect to CO2 activation and oxalate formation, obviously connected to electron transfer through the MgO film from the metal substrate underneath. Here we present XPS and Auger data, which allows detailed analysis of the observed chemical shifts. This analysis corroborates previous findings deduced via STM.

Surface Termination of Fe3O4(111) Films Studied by CO Adsorption Revisited.

Although the (111) surface of Fe3O4 (magnetite) has been investigated for more than 20 years, substantial controversy remains in the literature regarding the surface termination proposed based on structural and adsorption studies. The present article provides density functional theory results that allow to rationalize experimental results of infrared reflection-absorption spectroscopy and temperature-programmed desorption studies on CO adsorption, thus leading to a unified picture in which the Fe3O4(111) surface is terminated by a 1/4 monolayer of tetrahedrally coordinated Fe3+ ions on top of a close-packed oxygen layer as previously determined by low energy electron diffraction. However, surface defects play a crucial role in adsorption properties and may dominate chemical reactions on Fe3O4(111) when exposed to the ambient.

Local electronic structure, work function, and line defect dynamics of ultrathin epitaxial ZnO layers on a Ag(1 1 1) surface.

Using combined low-temperature scanning tunneling microscopy and Kelvin probe force microscopy we studied the local electronic structure and work function change of the (0 0 0 1)-oriented epitaxial ZnO layers on a Ag(1 1 1) substrate. Scanning tunneling spectroscopy (STS) revealed that the conduction band minimum monotonically downshifts as the number of the ZnO layers increases up to 4 monolayers (ML). However, it was found by field emission resonance (FER) spectroscopy that the local work function of Ag(1 1 1) slightly decreases for 2 ML thick ZnO but it dramatically changes and drops by about 1.2 eV between 2 and 3 ML, suggesting a structural transformation of the ZnO layer. The spatial variation of the conduction band minimum and the local work function change were visualized at the nanometer scale by mapping the STS and FER intensities. Furthermore, we found that the ZnO layers contained line defects with a few tens of nm long, which can be removed by the injection of a tunneling electron into the conduction band.

Supports and modified nano-particles for designing model catalysts.

In order to design catalytic materials, we need to understand the essential causes for material properties resulting from its composite nature. In this paper we discuss two, at first sight, diverse aspects: (a) the effect of the oxide-metal interface on metal nanoparticle properties and (b) the consequences of metal particle modification after activation on the selectivity of hydrogenation reactions. However, these two aspects are intimately linked. The metal nanoparticle's electronic structure changes at the interface as a catalyst is brought to different reaction temperatures due to morphological modifications in the metal and, as we will discuss, these changes in the chemistry lead to changes in the reaction path. As the morphology of the particle varies, facets of different orientations and sizes are exposed, which may lead to a change in the surface chemistry as well. We use two specific reactions to address these issues in some detail. To the best of our knowledge, the present paper reports the first observations of this kind for well-defined model systems. The changes in the electronic structure of Au nanoparticles due to their size and interaction with a supporting oxide are revealed as a function of temperature using CO2 activation as a probe. The presence of spectator species (oxopropyl), formed during an activation step of acrolein hydrogenation, strongly controls the selectivity of the reaction towards hydrogenation of the unsaturated C[double bond, length as m-dash]O bond vs. the C[double bond, length as m-dash]C bond on Pd(111) when compared with oxide-supported Pd nanoparticles.

Ultrathin oxide films on metal supports: structure-reactivity relations.

Well-ordered, thin oxide films have drawn some attention in recent years as suitable oxide supports for modeling highly dispersed metal catalysts at the atomic scale. It turned out, however, that ultrathin oxide films may exhibit interesting catalytic properties in their own right. In this review, we discuss phenomena specifically connected to ultrathin oxide films to explain and understand the physicochemical basis of their reactivity in oxidation reactions. Two sets of systems are discussed, i.e., transition metal oxide films grown on metal substrates and native oxide films formed upon oxidation of metal surfaces.

Morphological and chemical influences on alumina-supported palladium catalysts active for the gas phase hydrogenation of crotonaldehyde.

A series of five alumina-supported palladium catalysts have previously been prepared and characterised by a combination of CO chemisorption and infrared spectroscopy. The reactive attributes of these catalysts are examined using the hydrogenation of crotonaldehyde as a test reaction, using a modified infrared gas cell as a batch reactor. Periodic scanning of the infrared spectrum of the gaseous phase present over the Pd/Al(2)O(3) catalysts was used to construct reaction profiles. Four of the catalysts were able to facilitate a 2-stage hydrogenation process (crotonaldehyde → butanal → butanol), whilst one catalyst was totally selective for the first stage hydrogenation process (crotonaldehyde → butanal). Rate coefficients for the first and second stage hydrogenation processes are normalised to the number of surface palladium atoms for the particular catalyst. Correlation of these kinetic parameters as a function of mean particle size indicates the first stage process to be structure insensitive, whilst the second stage hydrogenation is structure sensitive. Chlorine residues associated with the preparative process of one of the catalysts is seen to selectively poison the second stage hydrogenation process for that catalyst. Structure/activity relationships are considered to explain the observed trends.

Growth and structure of crystalline silica sheet on Ru(0001).

Thin SiO2 films were grown on a Ru(0001) single crystal and studied by photoelectron spectroscopy, infrared spectroscopy and scanning probe microscopy. The experimental results in combination with density functional theory calculations provide compelling evidence for the formation of crystalline, double-layer sheet silica weakly bound to a metal substrate.

Nitrite and nitrate formation on model NOx storage materials: on the influence of particle size and composition.

A well-defined model-catalyst approach has been utilized to study the formation and decomposition of nitrite and nitrate species on a model NO(x) storage material. The model system comprises BaAl(2x)O(1+3x) particles of different size and stoichiometry, prepared under ultrahigh-vacuum (UHV) conditions on Al(2)O(3)/NiAl(110). Adsorption and reaction of NO(2) has been investigated by molecular beam (MB) methods and time-resolved IR reflection absorption spectroscopy (TR-IRAS) in combination with structural characterization by scanning tunneling microscopy (STM). The growth behavior and chemical composition of the BaAl(2x)O(1+3x) particles has been investigated previously. In this work we focus on the effect of particle size and stoichiometry on the reaction with NO(2). Particles of different size and of different Ba(2+) : Al(3+) surface ion ratio are prepared by varying the preparation conditions. It is shown that at 300 K the reaction mechanism is independent of particle size and composition, involving initial nitrite formation and subsequent transformation of nitrites into surface nitrates. The coordination geometry of the surface nitrates, however, changes characteristically with particle size. For small BaAl(2x)O(1+3x) particles high temperature (800 K) oxygen treatment gives rise to particle ripening, which has a minor effect on the NO(2) uptake behavior, however. STM shows that the morphology of the particle system is largely conserved during NO(2) exposure at 300 K. The reaction is limited to the formation of surface nitrites and nitrates, which are characterized by low thermal stability and completely decompose below 500 K. As no further sintering occurs before decomposition, NO(2) uptake and release is a fully reversible process. For large BaAl(2x)O(1+3x) particles, aggregates with different Ba(2+) : Al(3+) surface ion ratio were prepared. It was shown that the stoichiometry has a major effect on the kinetics of NO(2) uptake. For barium-aluminate-like particles with high Al(3+) concentration, the formation of nitrites and nitrates on the BaAl(2x)O(1+3x) particles at 300 K is slow, and kinetically restricted to the formation of surface species. Only at elevated temperature (500 K) are surface nitrates converted into well-defined bulk Ba(NO(3))(2). This bulk Ba(NO(3))(2) exhibits substantially higher thermal stability and undergoes restructuring and sintering before it decomposes at 700 K. For Ba(2+)-rich BaAl(2x)O(1+3x) particles, on the other hand, nitrate formation occurs at a much higher rate than for the barium-aluminate-like particles. Furthermore, nitrate formation is not limited to the surface, but NO(2) exposure gives rise to the formation of amorphous bulk Ba(NO(3))(2) particles even at 300 K.

Morphology and CO adsorption on platinum supported on thin Fe(3)O(4)(111) films.

Nucleation, growth and thermal stability of Pt particles supported on well ordered Fe(3)O(4)(111) thin films grown on Pt(111) were studied by scanning tunnelling microscopy (STM) and temperature programmed desorption (TPD) of CO. STM studies showed that Pt grows through the formation of single-layer islands that coalesce at high coverage. Vacuum annealing at 600 K caused Pt sintering and the formation of extended two-dimensional (2D) islands one and two layers in thickness at sub-monolayer coverage. Well faceted, three-dimensional (3D) Pt nanoparticles formed by annealing to temperatures above 800 K were encapsulated by an FeO(111) monolayer. These results were rationalized in terms of the high adhesion energy for Pt on iron oxide surfaces. CO TPD studies showed that 2D structures, formed at 600 K, exhibit much lower CO adsorption capacity as compared to the Pt(111) single crystal surface. This effect has been tentatively assigned to lattice expansion in the Pt 2D islands leading to weakening of the Pt-CO bond due to reduction of the [Formula: see text] back-donation.

Particle size dependent adsorption and reaction kinetics on reduced and partially oxidized Pd nanoparticles.

Combining scanning tunneling microscopy (STM), IR reflection absorption spectroscopy (IRAS) and molecular beam (MB) techniques, we have investigated particle size effects on a Pd/Fe(3)O(4) model catalyst. We focus on the particle size dependence of (i) CO adsorption, (ii) oxygen adsorption and (iii) Pd nanoparticle oxidation/reduction. The model system, which is based on Pd nanoparticles supported on an ordered Fe(3)O(4) film on Pt(111), is characterized in detail with respect to particle morphology, nucleation, growth and coalescence behavior of the Pd particles. Morphological changes upon stabilization by thermal treatment in oxygen atmosphere are also considered. The size of the Pd particles can be varied roughly between 1 and 100 nm. The growth and morphology of the Pd particles on the Fe(3)O(4)/Pt(111) film were characterized by STM and IRAS of adsorbed CO as a probe molecule. It was found that very small Pd particles on Fe(3)O(4) show a strongly modified adsorption behavior, characterized by atypically weak CO adsorption and a characteristic CO stretching frequency around 2130 cm(-1). This modification is attributed to a strong interaction with the support. Additionally, the kinetics of CO adsorption was studied by sticking coefficient experiments as a function of particle size. For small particles it is shown that the CO adsorption rate is significantly enhanced by the capture zone effect. The absolute size of the capture zone was quantified on the basis of the STM and sticking coefficient data. Finally, oxygen adsorption was studied by means of MB CO titration experiments. Pure chemisorption of oxygen is observed at 400 K, whereas at 500 K partial oxidation of the particles occurs. The oxidation behavior reveals strong kinetic hindrances to oxidation for larger particles, whereas facile oxidation and reduction are observed for smaller particles. For the latter, estimates point to the formation of oxide layers which, on average, are thicker than the surface oxides on corresponding single crystal surfaces.

Surface metal-insulator transition on a vanadium pentoxide (001) single crystal.

In situ band gap mapping of the V2O5(001) crystal surface revealed a reversible metal-to-insulator transition at 350-400 K, which occurs inhomogeneously across the surface and expands preferentially in the direction of the vanadyl (V=O) double rows. Supported by density functional theory and Monte Carlo simulations, the results are rationalized on the basis of the anisotropic growth of vanadyl-oxygen vacancies and a concomitant oxygen loss driven metal-to-insulator transition at the surface. At elevated temperatures irreversible surface reduction proceeds sequentially as V2O5(001) --> V6O13(001) --> V2O3(0001).

Atomic structure of a thin silica film on a Mo(112) substrate: a two-dimensional network of SiO4 tetrahedra.

The structure of a thin single crystalline SiO(2) film grown on Mo(112) has been studied by scanning tunneling microscopy, infrared reflection absorption spectroscopy, and x-ray photoelectron spectroscopy. In excellent agreement with the experimental results, density functional theory calculations show that the film consists of a two-dimensional network of corner sharing [SiO(4)] tetrahedra, with one oxygen of each tetrahedron binding to the protruding Mo atoms of the Mo(112) surface.

Ferryl (Fe=O) termination of the hematite alpha-Fe2O3(0001) surface.

Using scanning tunneling microscopy and infrared reflection absorption spectroscopy we have observed that the alpha-Fe2O3(0001) surface exhibits ferryl (Fe=O) groups, which may coexist with domains of the Fe-terminated surface. We therefore fully support ab initio calculations recently reported in the literature [W. Bergmeyer, H. Schweiger, and E. Wimmer, Phys. Rev. B 69, 195409 (2004)]. The close similarity to the results on the (0001) surfaces of Cr2O3 and V2O3 strongly suggests that the M=O termination under certain oxygen pressure conditions is the most stable for the close-packed surfaces of transition metal oxides with the corundum structure.