Preparation of Monodisperse Silica Mesoporous Microspheres with Narrow Pore Size Distribution.

The purpose of this study is to prepare monodisperse silica mesoporous microspheres with narrow pore size distribution to promote their application in the field of liquid chromatography. An improved emulsion method was used to prepare silica mesoporous microspheres, and the rotary evaporation temperature, emulsification speed, dosage of porogen DMF, and dosage of the catalyst NH3·H2O were optimized. Subsequently, these microspheres were respectively treated by alkali-heating, calcination, and sieving. The D50 (particle size at the cumulative particle size distribution percentage of 50%) of as-prepared silica mesoporous microspheres is 26.3 µm, and the D90/D10 (the ratio of particle size at a cumulative particle size distribution percentage of 90% to a cumulative particle size distribution percentage of 10%) is 1.94. The resultant silica mesoporous microspheres have distinctive pore structures, with a pore volume of more than 1.0 cm3/g, an average pore size of 11.35 nm, and a median pore size of 13.4 nm. The silica mesoporous microspheres with a large particle size, uniform particle size distribution, large average pore size and pore volume, and narrow mesopore size distribution can basically meet the requirements of preparative liquid chromatographic columns.

Cost-Effective Preparation of Hydrophobic and Thermal-Insulating Silica Aerogels.

The aim of this study is to reduce the manufacturing cost of a hydrophobic and heat-insulating silica aerogel and promote its industrial application in the field of thermal insulation. Silica aerogels with hydrophobicity and thermal-insulation capabilities were synthesized by using water-glass as the silicon source and supercritical drying. The effectiveness of acid and alkali catalysis is compared in the formation of the sol. The introduction of sodium methyl silicate for the copolymerization enhances the hydrophobicity of the aerogel. The resultant silica aerogel has high hydrophobicity and a mesoporous structure with a pore volume exceeding 4.0 cm3·g-1 and a specific surface area exceeding 950 m2·g-1. The obtained silica aerogel/fiber-glass-mat composite has high thermal insulation, with a thermal conductivity of less than 0.020 W·m-1·K-1. The cost-effective process is promising for applications in the industrial preparation of silica aerogel thermal-insulating material.

[GE Signa HDxt 1.5 T MRI PAC Module Troubleshooting and Repair].

Through the analysis of PAC module faults in two GE Signa HDxt 1.5 T MRI cases, the fault performance was analyzed. According to the working principle of PAC module, the fault was analyzed and processed, and then the suspicious fault parts were located and repaired to make the equipment run normally. Finally, the operating principles of PAC module in terms of power supply, signal transmission and data transmission were summarized to facilitate the subsequent quickly and find out fault points for maintenance accurately.

Therapeutic role of growth factors in treating diabetic wound.

Wounds in diabetic patients, especially diabetic foot ulcers, are more difficult to heal compared with normal wounds and can easily deteriorate, leading to amputation. Common treatments cannot heal diabetic wounds or control their many complications. Growth factors are found to play important roles in regulating complex diabetic wound healing. Different growth factors such as transforming growth factor beta 1, insulin-like growth factor, and vascular endothelial growth factor play different roles in diabetic wound healing. This implies that a therapeutic modality modulating different growth factors to suit wound healing can significantly improve the treatment of diabetic wounds. Further, some current treatments have been shown to promote the healing of diabetic wounds by modulating specific growth factors. The purpose of this study was to discuss the role played by each growth factor in therapeutic approaches so as to stimulate further therapeutic thinking.

Intestinal obstruction due to idiopathic mesenteric phlebosclerosis colitis: A case report.

Introduction: Idiopathic mesenteric phlebosclerosis colitis (IMP) is a rare condition that impairs colonic venous blood return owing to mesenteric venous sclerosis and fibrosis. At present, many studies have suggested that long-term intake of Chinese herbal medicines is associated with its pathogenesis. IMP has no characteristic clinical manifestations, and most patients with IMP present with acute intestinal obstruction. As a rare disease, the etiology, pathogenesis, pathophysiology, and treatment of IMP are being explored and studied. Case Description: A 60-year-old Chinese male patient with IMP was admitted to our hospital for acute intestinal obstruction, received subtotal colectomy and ileostomy after 10 days of ineffective conservative treatment, and was discharged after postoperative supportive treatment for 1 month. Conclusion: There are many causes of intestinal obstruction, and we report a relatively rare one. After failure of conservative treatment, it is necessary to surgically resect part of the diseased bowel.

Large-Scale Preparation of Silver Nanowire-Based Flexible Transparent Film Heaters by Slot-Die Coating.

Highly flexible silver nanowire-based transparent conductive films (AgNWs TCFs) were large-scale fabricated by slot-die coating AgNWs inks on a flexible polyethylene terephthalate (PET) substrate, and further fabricated into a transparent film heater. Appropriate flow rate, coating speed, and AgNWs concentration allow the construction of the 15 cm × 15 cm AgNW TCFs with a sheet resistance (Rs) of less than 20 Ω/sq, a transmittance (T) at 550 nm higher than 95%, and a haze less than 3.5%. The resultant AgNW TCFs heater possesses high uniformity and superior mechanical stability and can reach a Joule heating temperature of 104 °C with a voltage of 12 V. The slot-die coating method has great potential for large-scale production of AgNW based film heaters promisingly used in window defrost and deicer systems.

Accumulation of high-molecular-weight polycyclic aromatic hydrocarbon impacted the performance and microbial ecology of bioretention systems.

Bioretention has been considered as an effective management practice for urban stormwater in the removal of pollutants including polycyclic aromatic hydrocarbons (PAHs). However, the accumulation of high-molecular-weight (HMW) PAHs in bioretention systems and their potential impact on the pollutants removal performance and microbial ecology are still not fully understood. In this study, comparisons of treatment effectiveness, enzyme activity and microbial community in bioretention systems with different types of media amendments were carried out at different spiking levels of pyrene (PYR). The results showed that the removal efficiencies of chemical oxygen demand (COD) and total nitrogen in the bioretention systems were negatively impacted by the PYR levels. The relative activities of soil dehydrogenase and urease were increasingly inhibited by the elevated PYR level, indicating the declining microbial activity regarding organic matter decomposition. The spiking of PYR negatively affected microbial diversity, and distinct time- and influent-dependent changes in microbial communities were observed. The relative abundance of PAH-degrading microorganisms increased in PYR-spiked systems, while the abundance of nitrifiers decreased. The addition of media amendments was beneficial for the enrichment of microorganisms that are more resistant to PYR-related stress, therefore elevating the COD concentration removal rate by ∼50%. This study gives new insight into the multifaceted impacts of HMW PAH accumulation on microbial fingerprinting and enzyme activities, which may provide guidance on better stormwater management practices via bioretention in terms of improved system longevity and performance.

Biodegradation performance and diversity of enriched bacterial consortia capable of degrading high-molecular-weight polycyclic aromatic hydrocarbons.

Polycyclic aromatic hydrocarbons (PAHs) are key organic pollutants in the environment that pose threats to the ecosystem and human health. The degradation of high molecular weight (HMW) PAHs by enriched bacterial consortia has been previously studied, while the involved metabolisms and microbial communities are still unclear and warrant further investigations. In this study, five bacterial consortia capable of utilizing different PAHs (naphthalene, anthracene, and pyrene) as the sole carbon and energy sources were enriched from PAH-contaminated soil samples. Among the five consortia, consortium TC exhibited the highest pyrene degradation efficiency (91%) after 19 d of incubation. The degradation efficiency was further enhanced up to 99% by supplementing yeast extract. Besides, consortium TC showed tolerances to high concentrations of pyrene (up to 1000 mg/L) and different heavy metal stresses (including Zn2+, Cd2+, and Pb2+). The dominant genus in consortium TC, GS, and PL showing relatively higher degradation efficiency for anthracene and pyrene was Pseudomonas, whereas consortium PG and GD were predominated by genus Achromobacter and class Enterobacteriaceae, respectively. Consortium TC, as a highly efficient HMW PAH-degrading consortium, could be applied for synergistic biodegradation of HMW PAHs and in situ bioremediation of the sites contaminated with both PAHs and heavy metals.

Guidelines for Regulated Cell Death Assays: A Systematic Summary, A Categorical Comparison, A Prospective.

Over the past few years, the field of regulated cell death continues to expand and novel mechanisms that orchestrate multiple regulated cell death pathways are being unveiled. Meanwhile, researchers are focused on targeting these regulated pathways which are closely associated with various diseases for diagnosis, treatment, and prognosis. However, the complexity of the mechanisms and the difficulties of distinguishing among various regulated types of cell death make it harder to carry out the work and delay its progression. Here, we provide a systematic guideline for the fundamental detection and distinction of the major regulated cell death pathways following morphological, biochemical, and functional perspectives. Moreover, a comprehensive evaluation of different assay methods is critically reviewed, helping researchers to make a reliable selection from among the cell death assays. Also, we highlight the recent events that have demonstrated some novel regulated cell death processes, including newly reported biomarkers (e.g., non-coding RNA, exosomes, and proteins) and detection techniques.

Determination of the ED95 of a single bolus dose of dexmedetomidine for adequate sedation in obese or nonobese children and adolescents.

BACKGROUND: With the increasing prevalence of children who are overweight and with obesity, anaesthesiologists must determine the optimal dosing of medications given the altered pharmacokinetics and pharmacodynamics in this population. We therefore determined the single dose of dexmedetomidine that provided sufficient sedation in 95% (ED95) of children with and without obesity as measured by a minimum Ramsay sedation score (RSS) of 4. METHODS: Forty children with obesity (BMI >95th percentile for age and gender) and 40 children with normal weight (BMI 25th-84th percentile), aged 3-17 yr, ASA physical status 1-2, undergoing elective surgery, were recruited. The biased coin design was used to determine the target dose. Positive responses were defined as achievement of adequate sedation (RSS ≥4). The initial dose for both groups was dexmedetomidine 0.3 µg kg-1 i.v. infusion for 10 min. An increment or decrement of 0.1 µg kg-1 was used depending on the responses. Isotonic regression and bootstrapping methods were used to determine the ED95 and 95% confidence intervals (CIs), respectively. RESULTS: The ED95 of dexmedetomidine for adequate sedation in children with obesity was 0.75 µg kg-1 with 95% CI of 0.638-0.780 µg kg-1, overlapping the CI of the ED95 estimate of 0.74 µg kg-1 (95% CI: 0.598-0.779 µg kg-1) for their normal-weight peers. CONCLUSIONS: The ED95 values of dexmedetomidine administered over 10 min were 0.75 and 0.74 µg kg-1 in paediatric subjects with and without obesity, respectively, based on total body weight. CLINICAL TRIAL REGISTRATION: ChiCTR1800014266.

Liquid Transport in Fibrillar Channels of Ion-Associated Cellular Nanowood Foams.

A mechanical disintegration of waste wood biomass and freeze-induced assembly of colloidal nanowood were effectively deployed to explore ion-associated cellular foams (NWFs) with unidirectional channels. Under the assistance of inorganic ions, the as-fabricated foams were significantly enhanced in physical stability, compressive strength, flame retardancy, and thermal barrier, accounting for the tuning effects of pores and channels, surface charges, and microphase interaction by ion effects and freeze orientation. As a result, the vascular-like ion-doped channels benefited from quick capillary liquid transport. Under 1 sun illumination, NWF-V as a 3-D evaporator exhibited a high evaporation rate of 1.50 kg m-2 h-1 and a conversion efficiency of up to 88.9% for seawater desalination. Dramatically, an average of 12.5 kg m-2 of fresh water could be generated on each sunny day by outdoor NWFs for durability beyond 15 days. Under the drive of fuel combustion, an efficient conveying of ethanol or pump oil could be at rates of 0.44 and 0.26 mL min-1, respectively. Moreover, combustion flame with variable color was generated according to the doping cations in NWFs. Therefore, sustainable, green, facile, and multifunctional wood-based cellular foams could be tailored, scaled-up, and applied as color flame burners or desalination evaporators under combustion or solar drive in the energy and environment fields.

Chromium (III) coordination capacity of chitosan.

Polycationic chitosan has a strong coordination to heavy metal ions due to its multifunctional hydroxyl and amino groups. However, due to the fast and facile dissolution of chitosan in acidic medium, it is difficult to measure the exact adsorption amount or coordination capacity accurately. In this work, a simple method of lyophilization plus ethanol-washing was employed to separate and purify chitosan/Cr(III) complex for further determining the coordination capacity. Meanwhile, the coordination structure of Bridge-chitosan-N(OH)3(H2O) and morphology of regenerated fibrillar sponge of CS/Cr(III) were further certified. The coordination capacity of Cr(III) on chitosan increased with the rising concentration of Cr(III) ions till the maximum coordination capacity was reached up to 355.03 mg/g. The mechanisms and characteristic parameters of the adsorption process were fit using two-parameter isotherm models which revealed the following order (based on the coefficient of determination) of Langmuir > Halsey > Freundlich > Temkin > Dubinin-Radushkevich. A proposed coordination formula of CS/Cr (III) might be a good certificate for the homogeneous chemical combination nature of Cr(III) on the monolayer surface of chitosan in a molecular scale.

Facile Synthesis of Methylsilsesquioxane Aerogels with Uniform Mesopores by Microwave Drying.

Methylsilsesquioxane (MSQ) aerogels with uniform mesopores were facilely prepared via a sol⁻gel process followed by microwave drying with methyltrimethoxysilane (MTMS) as a precursor, hydrochloric acid (HCl) as a catalyst, water and methanol as solvents, hexadecyltrimethylammonium chloride (CTAC) as a surfactant and template, and propylene oxide (PO) as a gelation agent. The microstructure, chemical composition, and pore structures of the resultant MSQ aerogels were investigated in detail to achieve controllable preparation of MSQ aerogels, and the thermal stability of MSQ aerogels was also analyzed. The gelation agent, catalyst, solvent, and microwave power have important roles related to the pore structures of MSQ aerogels. Meanwhile, the microwave drying method was found to not only have a remarkable effect on improving production efficiency, but also to be conducive to avoiding the collapse of pore structure (especially micropores) during drying. The resulting MSQ aerogel microwave-dried at 500 W possessed a specific surface area up to 821 m²/g and a mesopore size of 20 nm, and displayed good thermal stability.

Fabrication and Characterization of MSQ Aerogel Coating on ePTFE Thin Films for Cable Sheaths.

With methylsilsesquioxane (MSQ) aerogels synthesized by the sol-gel method as a raw material and Si-Ti sol as a binder, an alcohol-based aerogel slurry consisting of only MSQ aerogel and Si-Ti sol was prepared and coated on expanded polytetrafluoroethylene (ePTFE) to form an MSQ aerogel coating layer, followed by low-temperature heat treatment. The effect of Si-Ti sol content on the microstructure of the MSQ aerogel coating layer was investigated, and the properties of a typical MSQ aerogel-layer-coated ePTFE film were evaluated. The results show that Si-Ti sol has an important role in terms of film-forming capability, surface smoothness, flexibility, and powder dropping of the MSQ aerogel coating layer. With a Si-Ti sol of 10.5 wt.% content as a binder and after heat treatment at 170 °C for 30 min, the coated ePTFE flexible thin film with a layer thickness of 30 µm shows high uniformity, integrity, and electrical insulation properties, with an elongation at break decrease over 130%, a thermal conductivity of 0.1753 W/(m·K) at 25 °C, a dielectric constant of 16.5674, and a dielectric loss of 0.06369, which can be promisingly applied in cable sheaths.

Facile Synthesis of Flexible Methylsilsesquioxane Aerogels with Surface Modifications for Sound- Absorbance, Fast Dye Adsorption and Oil/Water Separation.

New flexible methylsilsesquioxane (MSQ) aerogels have been facilely prepared by a sol-gel process with methyltrimethoxysilane (MTMS) and dimethyldimethoxysilane (DMDMS) as co-precursors, followed by surface modification and ambient pressure drying. The microstructure, mechanical properties and hydrophobicity of these MSQ aerogels after surface modifications of hexamethyldisiloxane (HMDSO) and/or hexamethyldisilazane (HMDS) were investigated in detail, and the applications of surface-modified MSQ aerogels in sound-absorbance, fast dye adsorption and oil/water separation were evaluated, respectively. The MSQ aerogels surface-modified by HMDS possess flexibility, elasticity and superhydrophobicity, and demonstrate good performance in the mentioned applications. The resultant MSQ aerogel used in sound-absorbance has high frequency (about 6 kHz) acoustic absorptivity of up to 80%, benefiting from its macroporous structure and porosity of 94%, and it also possesses intermediate frequency acoustic absorptivity (about 1 kHz) up to 80% owing to its elasticity. This MSQ aerogel can selectively separate oil from oil/water mixtures with high efficiency due to its superhydrophobicity and superlipophilicity, resulting from a lot of methyl groups, density as low as 0.12 cm³·g-1 and a water contact angle as high as 157°. This MSQ aerogel can be assembled to be a monolithic column applied for fast dye adsorption, and shows selective adsorption for anionic dyes and removal efficiency of methyl orange of up to 95%.

The discovery and development of prasugrel.

INTRODUCTION: Prasugrel (CS-747, LY640315) is a third-generation thienopyridine, which gained approval by the FDA in 2009 for its use in patients with acute coronary syndrome undergoing percutaneous coronary intervention. AREAS COVERED: This article focuses on the preclinical profile of prasugrel. Using published preclinical and clinical studies, the authors summarize the pharmacokinetics, pharmacodynamics, and pharmacogenomics of prasugrel and their distinguishing features in efficacy and safety. EXPERT OPINION: Prasugrel has a more rapid, more potent antiplatelet effect with less interindividual response variability when compared to clopidogrel. Those therapeutic advantages are attributed to features of its chemical structure that favor the metabolic conversion of prasugrel to its active metabolite. However, the increased risk of bleeding has been associated with a greater antiplatelet effect and dosing profile; this is especially the case in those patients who are at a higher risk of bleeding complications. It is therefore important for an optimal dosing strategy of prasugrel to be identified to provide a formulation that has the best balance for efficacy and safety.

Overcoming clopidogrel resistance: discovery of vicagrel as a highly potent and orally bioavailable antiplatelet agent.

A series of optically active 2-hydroxytetrahydrothienopyridine derivatives were designed and synthesized as prodrugs of clopidogrel thiolactone in order to overcome clopidogrel resistance. The final compounds were evaluated for their inhibitory effect on ADP-induced platelet aggregation in rats. Compound 9a was selected for further in vitro and in vivo metabolism studies, since its potency was comparable to that of prasugrel and was much higher than that of clopidogrel. Preliminary pharmacokinetic study results showed that the bioavailability of clopidogrel thiolactone generated from 9a was 6-fold higher than that generated from clopidogrel, implying a much lower clinically effective dose for 9a in comparison with clopidogrel. In summary, 9a (vicagrel) holds great promise as a more potent and a safer antiplatelet agent that might have the following advantages over clopidogrel: (1) no drug resistance for CYP2C19 poor metabolizers; (2) lower dose-related toxicity due to a much lower effective dose; (3) faster onset of action.