Regulating the Potential of Anion Redox to Reduce the Voltage Hysteresis of Li-Rich Cathode Materials.

Layered Li-rich oxides (LROs) that exhibit anionic and cationic redox are extensively studied due to their high energy storage capacities. However, voltage hysteresis, which reduces the energy conversion efficiency of the battery, is a critical limitation in the commercial application of LROs. Herein, using two Li2RuO3 (LRO) model materials with C2/c and P21/m symmetries, we explored the relationship between voltage hysteresis and the electronic structure of Li2RuO3 by neutron diffraction, in situ X-ray powder diffraction, X-ray absorption spectroscopy, macro magnetic study, and electron paramagnetic resonance (EPR) spectroscopy. The charge-transfer band gap of the LRO cathode material with isolated eg electron filling decreases, reducing the oxidation potential of anion redox and thus displaying a reduced voltage hysteresis. We further synthesized Mn-based Li-rich cathode materials with practical significance and different electron spin states. Low-spin Li1.15Ni0.377Mn0.473O2 with isolated eg electron filling exhibited a reduced voltage hysteresis and high energy conversion efficiency. We rationalized this finding via density functional theory calculations. This discovery should provide critical guidance in designing and preparing high-energy layered Li-rich cathode materials for use in next-generation high-energy-density Li-ion batteries based on anion redox activity.

Sub-2 nm Ultrasmall High-Entropy Alloy Nanoparticles for Extremely Superior Electrocatalytic Hydrogen Evolution.

The development of sufficiently effective catalysts with extremely superior performance for electrocatalytic hydrogen production still remains a formidable challenge, especially in acidic media. Here, we report ultrasmall high-entropy alloy (us-HEA) nanoparticles (NPs) with the best-level performance for hydrogen evolution reaction (HER). The us-HEA (NiCoFePtRh) NPs show an average diameter of 1.68 nm, which is the smallest size in the reported HEAs. The atomic structure, coordinational structure, and electronic structure of the us-HEAs were comprehensively clarified. The us-HEA/C achieves an ultrahigh mass activity of 28.3 A mg-1noble metals at -0.05 V (vs the reversible hydrogen electrode, RHE) for HER in 0.5 M H2SO4 solution, which is 40.4 and 74.5 times higher than those of the commercial Pt/C and Rh/C catalysts, respectively. Moreover, the us-HEA/C demonstrates an ultrahigh turnover frequency of 30.1 s-1 at 50 mV overpotential (41.8 times higher than that of the Pt/C catalyst) and excellent stability with no decay after 10 000 cycles. Operando X-ray absorption spectroscopy and theoretical calculations reveal the actual active sites, tunable electronic structures, and a synergistic effect among five elements, which endow significantly enhanced HER activity. This work not only engineers a general and scalable strategy for synthesizing us-HEA NPs and elucidates the complex structural information and catalytic mechanisms of multielement HEA system in depth, but also highlights HEAs as sufficiently advanced catalysts and accelerates the research of HEAs in energy-related applications.

Inhibition of oxygen dimerization by local symmetry tuning in Li-rich layered oxides for improved stability.

Li-rich layered oxide cathode materials show high capacities in lithium-ion batteries owing to the contribution of the oxygen redox reaction. However, structural accommodation of this reaction usually results in O-O dimerization, leading to oxygen release and poor electrochemical performance. In this study, we propose a new structural response mechanism inhibiting O-O dimerization for the oxygen redox reaction by tuning the local symmetry around the oxygen ions. Compared with regular Li2RuO3, the structural response of the as-prepared local-symmetry-tuned Li2RuO3 to the oxygen redox reaction involves the telescopic O-Ru-O configuration rather than O-O dimerization, which inhibits oxygen release, enabling significantly enhanced cycling stability and negligible voltage decay. This discovery of the new structural response mechanism for the oxygen redox reaction will provide a new scope for the strategy of enhancing the anionic redox stability, paving unexplored pathways toward further development of high capacity Li-rich layered oxides.

O2-Type Li0.78[Li0.24Mn0.76]O2 Nanowires for High-Performance Lithium-Ion Battery Cathode.

Continued improvement in the electrochemical performance of Li-Mn-O oxide cathode materials is key to achieving advanced low-cost Li-ion batteries with high energy densities. In this study, O2-type Li0.78[Li0.24Mn0.76]O2 nanowires were synthesized by a solvothermal reaction to produce P2-type Na5/6[Li1/4Mn3/4]O2 nanowires, which were then subjected to molten salt Li-ion exchange. The resulting nanowires have diameters less than 20 nm and lengths of several micrometers. The full-Mn-based nanowires cathode material delivers a reversible capacity of 275 mAh g-1 at 0.1 C and 200 mAh g-1 at a high current rate of 15 C with a capacity retention of more than 80% and the voltage decay was dramatically suppressed after 100 cycles. This excellent performance is ascribed to the highly stable oxygen redox reaction and lack of layered-to-spinel phase transition in the O2-type structure during cycling.

A High-Performance Li-Mn-O Li-rich Cathode Material with Rhombohedral Symmetry via Intralayer Li/Mn Disordering.

The search for new high-performance and low-cost cathode materials for Li-ion batteries is a challenging issue in materials research. Commonly used cobalt- or nickel-based cathodes suffer from limited resources and safety problems that greatly restrict their large-scale application, especially for electric vehicles and large-scale energy storage. Here, a novel Li-Mn-O Li-rich cathode material with R 3 ¯ m symmetry is developed via intralayer Li/Mn disordering in the Mn-layer. Due to the special atomic arrangement and higher R 3 ¯ m symmetry with respect to the C2/m symmetry, the oxygen redox activity is modulated and the Li in the Li-layer is preferentially thermodynamically extracted from the crystal structure instead of Li in the Mn-layer. The as-obtained material delivers a reversible capacity of over 300 mAh g-1 at 25 mA g-1 and rate capability of up to 260 mAh g-1 at 250 mA g-1 within 2.0-4.8 V. The excellent performance is attributed to its highly structural reversibility, mitigation of Jahn-Teller distortion, lower bandgap, and faster Li-ion 2D channels during the lithium-ion de/intercalation process. This material is not only a promising cathode material candidate but also raises new possibilities for the design of low-cost and high-performance cathode materials.

Suppressing Voltage Decay of a Lithium-Rich Cathode Material by Surface Enrichment with Atomic Ruthenium.

Lithium-rich layered oxides are promising cathode materials for high-energy-density lithium-ion batteries. However, the development of cathode materials based on these layered oxides has been limited by voltage fading, poor rate performance, and the low tap density of these materials. In this work, we prepared a material consisting of micrometer-scale spherical lithium-rich layered oxide particles with a three-dimensional conductivity network design and modified the surface of the primary particles with ruthenium. The as-obtained product with a maximum tap density of 2.1 g cm-3 shows a superior high reversible capacity with 280 mA h·g-1 at 0.1 C, a capacity retention of 98.1% after 100 cycles, and an outstanding rate capability. More importantly, enrichment of the primary particle surface with ruthenium can effectively suppress voltage decay. This cathode is feasible to construct high-energy and high-power lithium-ion batteries. This novel design may furthermore open the door to new material engineering applications for high-performance cathode materials.