High luminous efficiency and excellent thermal performance in rod-shaped YAG:Ce phosphor ceramics for laser lighting.

High power and high brightness laser lighting puts forward new requirements for phosphor converters such as high luminous efficiency, high thermal conductivity and high saturation threshold due to the severe thermal effect. The structure design of phosphor converters is proposed as what we believe to be a novel strategy for less heat production and more heat conduction. In this work, the rod-shaped YAG:Ce phosphor ceramics (PCs) and disc-shaped YAG:Ce PCs as control group were fabricated by the gel casting and vacuum sintering, to comparatively study the luminescence performance for LD lighting, on the premise that the total number of transverse Ce3+ ions and the volume of samples from two comparison groups were same. All rod YAG:Ce PCs with low Ce3+ concentration exhibited the high luminous efficiency and better thermal stability than YAG:Ce discs with high Ce3+ concentration. Under the laser power density of 47.8 W/mm2, the luminous saturation was never observed in all rod-shaped YAG:Ce PCs. The high luminous efficacy of 245∼274 lm/W, CRI of 56.3∼59.5 and CCT of 4509∼4478 K were achieved. More importantly, due to the extremely low Ce3+ doping concentration (0.01 at%), rod-shaped ceramics based LDs devices showed the excellent thermal performance and their surface temperatures were even below 30.5 °C surprisingly under the laser power density of 20.3 W·mm-2 (2 W). These results indicate that the rod shape of phosphor converter is a promising structure engineering for high power laser lighting.

High luminous efficiency and high saturation threshold in highly transparent LuAG:Ce phosphor ceramics for laser diodes lighting.

Lu3Al5O12:Ce (LuAG:Ce) phosphor ceramics (PCs) with the excellent thermal stability and high saturation threshold are considered as the best green-fluorescent converters for high-power laser diodes (LDs) lighting. In this study, the effects of sintering additives and sintering processes on the transmittance and microstructure of LuAG:Ce PCs were systematically studied, and the luminescence performance of ceramics with different transmittance was compared. LuAG:Ce PCs with the transmittance of 80% (@800 nm, 1.5 mm) were obtained by using 0.1 wt.% MgO and 0.5 wt.% TEOS as sintering additives, combined with optimized vacuum pre-sintering and hot isostatic pressing. Compared to the non-HIP samples, the transmittance had increased by 11%. The microstructure of ceramics indicated that high transparency was closely related to the decrease in intergranular pores. Notably, the luminous efficiency of 253 lm/W and its saturation thresholds of > 46 W/mm2 were obtained simultaneously in green-emitting LDs devices. Moreover, under 3W laser irradiation, highly transparent ceramics had the low surface temperature of 66.4 °C, indicating the good heat dissipation performance. The observed high luminous efficiency and high saturation threshold of LuAG:Ce PCs were attributed to fewer pores and oxygen vacancies. Therefore, this work proves that highly transparent LuAG:Ce PCs are promising green-fluorescent converters for high-power LDs lighting.

BcOPR3 Mediates Defense Responses to Biotrophic and Necrotrophic Pathogens in Arabidopsis and Non-heading Chinese Cabbage.

In plants, the salicylic acid (SA) and jasmonic acid (JA) signaling pathways usually mediate the defense response to biotrophic and necrotrophic pathogens, respectively. Our previous work showed that after non-heading Chinese cabbage (NHCC) was infected with the biotrophic pathogen Hyaloperonospora parasitica, expression of the JA biosynthetic gene BcOPR3 is induced; however, its molecular mechanism remains unclear. Here, we overexpressed BcOPR3 in Arabidopsis and silenced BcOPR3 in NHCC001 plants to study the defensive role of BcOPR3 in plants against pathogen invasion. The results showed that overexpression of BcOPR3 increased the susceptibility of Arabidopsis to Pseudomonas syringae pv. tomato DC3000 (Pst DC3000) but enhanced its resistance to Botrytis cinerea. BcOPR3-silenced NHCC001 plants with a 50% reduction in BcOPR3 expression increased their resistance to downy mildew by reducing the hyphal density and spores of H. parasitica. In addition, BcOPR3-partly silenced NHCC001 plants were also resistant to B. cinerea, which could be the result of a synergistic effect of JA and SA. These findings indicate a complicated role of BcOPR3 in the mediating defense responses to biotrophic and necrotrophic pathogens.

BcWRKY1 confers salt sensitivity via inhibiting Reactive oxygen species scavenging.

WRKY transcription factors play important roles in abiotic stress by directly regulating stress-related genes. However, the molecular mechanism of its involvement in salt stress in pak-choi is still poorly understood. In this study, we elucidated the function of BcWRKY1 from pak-choi (Brassica rapa ssp. chinensis) in salt stress. The expression level of BcWRKY1 showed the highest in rosette leaves among different tissues and was induced by salt and ABA treatment in pak-choi. Subcellular localization showed that BcWRKY1 was located in nucleus. The transgenic Arabidopsis overexpressing BcWRKY1 exhibited enhanced salt sensitivity and higher H2O2 contents, which were further confirmed by silencing BcWRKY1 in pak-choi. In addition, the expression of ZAT12 was negatively regulated with BcWRKY1 under salt stress both in pak-choi and Arabidopsis. Yeast one-hybrid and dual luciferase reporter assay showed that BcWRKY1 could bind to the promoter of BcZAT12, and BcsAPX expression was activated by BcZAT12. To sum up, we propose a BcWRKY1-BcZAT12-BcsAPX regulatory model that involves in pak-choi salt stress response.