Electron holography on HfO2/HfO2-x bilayer structures with multilevel resistive switching properties.

Unveiling the physical nature of the oxygen-deficient conductive filaments (CFs) that are responsible for the resistive switching of the HfO2-based resistive random access memory (RRAM) devices represents a challenging task due to the oxygen vacancy related defect nature and nanometer size of the CFs. As a first important step to this goal, we demonstrate in this work direct visualization and a study of physico-chemical properties of oxygen-deficient amorphous HfO2-x by carrying out transmission electron microscopy electron holography as well as energy dispersive x-ray spectroscopy on HfO2/HfO2-x bilayer heterostructures, which are realized by reactive molecular beam epitaxy. Furthermore, compared to single layer devices, Pt/HfO2/HfO2-x /TiN bilayer devices show enhanced resistive switching characteristics with multilevel behavior, indicating their potential as electronic synapses in future neuromorphic computing applications.

FIB based fabrication of an operative Pt/HfO2/TiN device for resistive switching inside a transmission electron microscope.

Recent advances in microelectromechanical systems (MEMS) based chips for in situ transmission electron microscopy are opening exciting new avenues in nanoscale research. The capability to perform current-voltage measurements while simultaneously analyzing the corresponding structural, chemical or even electronic structure changes during device operation would be a major breakthrough in the field of nanoelectronics. In this work we demonstrate for the first time how to electrically contact and operate a lamella cut from a resistive random access memory (RRAM) device based on a Pt/HfO2/TiN metal-insulator-metal (MIM) structure. The device was fabricated using a focused ion beam (FIB) instrument and an in situ lift-out system. The electrical switching characteristics of the electron-transparent lamella were comparable to a conventional reference device. The lamella structure was initially found to be in a low resistance state and could be reset progressively to higher resistance states by increasing the positive bias applied to the Pt anode. This could be followed up with unipolar set/reset operations where the current compliance during set was limited to 400 µA. FIB structures allowing to operate and at the same time characterize electronic devices will be an important tool to improve RRAM device performance based on a microstructural understanding of the switching mechanism.