Magnetic Particle Imaging-Guided Thermal Simulations for Magnetic Particle Hyperthermia.

Magnetic particle hyperthermia (MPH) enables the direct heating of solid tumors with alternating magnetic fields (AMFs). One challenge with MPH is the unknown particle distribution in tissue after injection. Magnetic particle imaging (MPI) can measure the nanoparticle content and distribution in tissue after delivery. The objective of this study was to develop a clinically translatable protocol that incorporates MPI data into finite element calculations for simulating tissue temperatures during MPH. To verify the protocol, we conducted MPH experiments in tumor-bearing mouse cadavers. Five 8-10-week-old female BALB/c mice bearing subcutaneous 4T1 tumors were anesthetized and received intratumor injections of Synomag®-S90 nanoparticles. Immediately following injection, the mice were euthanized and imaged, and the tumors were heated with an AMF. We used the Mimics Innovation Suite to create a 3D mesh of the tumor from micro-computerized tomography data and spatial index MPI to generate a scaled heating function for the heat transfer calculations. The processed imaging data were incorporated into a finite element solver, COMSOL Multiphysics®. The upper and lower bounds of the simulated tumor temperatures for all five cadavers demonstrated agreement with the experimental temperature measurements, thus verifying the protocol. These results demonstrate the utility of MPI to guide predictive thermal calculations for MPH treatment planning.

Understanding photochemical degradation mechanisms in photoactive layer materials for organic solar cells.

Over the past decades, the field of organic solar cells (OSCs) has witnessed a significant evolution in materials chemistry, which has resulted in a remarkable enhancement of device performance, achieving efficiencies of over 19%. The photoactive layer materials in OSCs play a crucial role in light absorption, charge generation, transport and stability. To facilitate the scale-up of OSCs, it is imperative to address the photostability of these electron acceptor and donor materials, as their photochemical degradation process remains a challenge during the photo-to-electric conversion. In this review, we present an overview of the development of electron acceptor and donor materials, emphasizing the crucial aspects of their chemical stability behavior that are linked to the photostability of OSCs. Throughout each section, we highlight the photochemical degradation pathways for electron acceptor and donor materials, and their link to device degradation. We also discuss the existing interdisciplinary challenges and obstacles that impede the development of photostable materials. Finally, we offer insights into strategies aimed at enhancing photochemical stability and discuss future directions for developing photostable photo-active layers, facilitating the commercialization of OSCs.

Enhanced Photocatalytic and Photovoltaic Performance Arising from Unconventionally Low Donor-Y6 Ratios.

Development of both organic photovoltaics (OPVs) and organic photocatalysts has focused on utilizing the bulk heterojunction (BHJ). The BHJ promotes charge separation and enhances the carrier lifetime, but may give rise to increased charge traps, hindering performance. Here, high photocatalytic and photovoltaic performance is displayed by electron donor-acceptor (D-A) nanoparticles (NPs) and films, using the nonfullerene acceptor Y6 and polymer donor PIDT-T8BT. In contrast to conventional D-A systems, the charge generation in PIDT-T8BT:Y6 NPs is mainly driven by Y6, allowing a high performance even at a low D:A mass ratio of 1:50. The high performance at the low mass ratio is attributed to the amorphous behavior of PIDT-T8BT. Low ratios are generally thought to yield lower efficiency than the more conventional ≈1:1 ratio. However, the OPVs exhibit peak performance at a D:A ratio of 1:5. Similarly the NPs used for photocatalytic hydrogen evolution show peak performance at the 1:6.7 D:A ratio. Interestingly, for the PIDT-T8BT:Y6 system, as the polymer proportion increases, a reduced photocatalytic and photovoltaic performance is observed. The unconventional D:A ratios provide lower recombination losses and increased charge-carrier lifetime with undisrupted ambipolar charge transport in bulk Y6, enabling better performance than conventional ratios. This work reports novel light-harvesting materials in which performance is reduced due to unfavorable morphology as D:A ratios move toward conventional ratios of 1:1.2-1:1.

Synthetic and biopolymers-based antimicrobial hybrid hydrogels: a focused review.

The constantly accelerating occurrence of microbial infections and their antibiotic resistance has spurred advancement in the field of material sciences and has guided the development of novel materials with anti-bacterial properties. To address the clinical exigencies, the material of choice should be biodegradable, biocompatible, and able to offer prolonged antibacterial effects. As an attractive option, hydrogels have been explored globally as a potent biomaterial platform that can furnish essential antibacterial attributes owing to its three-dimensional (3D) hydrophilic polymeric network, adequate biocompatibility, and cellular adhesion. The current review focuses on the utilization of different antimicrobial hydrogels based on their sources (natural and synthetic). Further, the review also highlights the strategies for the generation of hydrogels with their advantages and disadvantages and their applications in different biomedical fields. Finally, the prospects in the development of hydrogels-based antimicrobial biomaterials are discussed along with some key challenges encountered during their development and clinical translation.

Semitransparent Organic Photovoltaics Utilizing Intrinsic Charge Generation in Non-Fullerene Acceptors.

In organic semiconductors, a donor/acceptor heterojunction is typically required for efficient dissociation of excitons. Using transient absorption spectroscopy to study the dynamics of excited states in non-fullerene acceptors (NFAs), it is shown that NFAs can generate charges without a donor/acceptor interface. This is due to the fact that dielectric solvation provides a driving force sufficient to dissociate the excited state and form the charge-transfer (CT) state. The CT state is further dissociated into free charges at interfaces between polycrystalline regions in neat NFAs. For IEICO-4F, incorporating just 9 wt% donor polymer PTB7-Th in neat films greatly boosts charge generation, enhancing efficient exciton separation into free charges. This property is utilized to fabricate donor-dilute organic photovoltaics (OPV) delivering a power conversion efficiency of 8.3% in the case of opaque devices with a metal top-electrode and an active layer average visible transmittance (AVT) of 75%. It is shown that the intrinsic charge generation in low-bandgap NFAs contributes to the overall photocurrent generation. IEICO-4F-based OPVs with limited PTB7-Th content have high thermal resilience demonstrating little drop in performance over 700 h. PTB7-Th:IEICO-4F semitransparent OPVs are leveraged to fabricate an 8-series connected semitransparent module, demonstrating light-utilization efficiency of 2.2% alongside an AVT of 63%.

A Novel Port to Facilitate Magnetic Hyperthermia Therapy for Glioma.

High-grade gliomas (HGG) are the most common primary brain malignancy and continue to be associated with a dismal prognosis (median survival rate of 15-18 months) with standard of care therapy. Magnetic hyperthermia therapy (MHT) is an emerging intervention that leverages the ferromagnetic properties of magnetic iron-oxide nanoparticles (MIONPs) to target cancer cells that are otherwise left behind after resection. We report a novel port device to facilitate localization, delivery, and temperature measurement of MIONPs within a target lesion for MHT therapy. We conducted an in-depth literature and intellectual property review to define specifications of the conceived port device. After setting the design parameters, a thorough collaboration with neurological surgeons guided the iterative modeling process. A prototype was developed using Fusion 360 (Autodesk, San Rafael, CA) and printed on a Form 3 printer (Formlabs, Medford, MA) in Durable resin. The prototype was then tested in a phantom skull printed on a Pro-Jet 660Pro 3D printer (3D Systems, Rock Hill, SC) and a brain model based on mechanical and electrochemical properties of native brain tissue. This phantom underwent MHT heating tests using an alternating magnetic field (AMF) sequence based on current MHT workflow. Successful localization, delivery, and temperature measurement were demonstrated. The purpose of this study was twofold: first, to create and validate the procedural framework for a novel device, providing the groundwork for an upcoming comprehensive animal trial and second, to elucidate a cooperative approach between engineers and clinicians that propels advancements in medical innovation.

Functional and Radiological Outcomes Following Simultaneous Bilateral Total Hip Arthroplasty: Analysis of a Retrospective Series.

Introduction The prevalence of bilateral hip arthritis continues to rise. With the dramatic change in the practice of modern-day arthroplasty with standard operating protocols and guidelines in place to reduce the incidence of surgical site infection and peri-operative thromboembolic events, simultaneous bilateral total hip replacement (THR) has been considered a viable option to reduce morbidity. The efficacy of simultaneous bilateral THR with regard to patient outcomes and complications has been debated. The aim of this study was to assess and compare the functional outcomes, radiological outcomes, and complications following bilateral simultaneous THR with the existing literature. Methods We conducted a retrospective study of 28 patients who underwent simultaneous bilateral THR by a single surgeon at a district general hospital in the United Kingdom between 2010 and 2019. All the patients in the study were operated on via the posterior approach to the hip and received uncemented implants. Data on blood loss and hospital stay were collected from the hospital records. The radiological outcomes were studied from the post-operative radiographs. The patient-reported outcomes were measured via a telephone session at an average follow-up of 7.8 years. Results Our results noted a statistically significant drop in haemoglobin after the procedure from a mean of 13.5 g/dl to 9.05 g/dl (t: -15.84, p < 0.00001). The average blood loss was 643 ml +/- 330 ml (200-1850 ml). Nine patients (32.1%) required blood transfusions and a total of 21 units were transfused. The mean duration of stay in the hospital was 6.7 days (three to 20 days). There were no intra-operative/immediate/early post-operative complications. The revision rate was 1.7%, as one patient had a revision of the femoral component following a peri-prosthetic fracture. The mean visual analogue scale pain score was 1.51 +/- 0.58 (1-3). The mean Oxford Hip Score improved from 19.5 (12-28) pre-operatively to 44.3 (37-48) post-operatively at the time of the study (t: -21.88945; p < 0.00001), with the difference being statistically significant using a paired t-test. From the series, 14 (50%) patients were found to have limb length discrepancies. The mean limb length discrepancy was found to be 2.3 mm (0-16 mm). In 13 of the 28 patients (46.4%), the global hip offset was equal on both sides. In two patients, the difference in the global hip offset was more than 10 mm. Conclusion We reported good patient-reported functional outcomes with simultaneous bilateral THR with a low complication rate. Despite the lack of opportunity to template the second hip, the limb length and global hip offset can be restored after a simultaneous bilateral THR.

Rate of Total Hip Replacement after Legg Calve Perthes Disease in a Canadian Province.

Legg Calve Perthes disease is a pediatric hip condition that leads to early hip degeneration. The efficacy of operative and nonoperative treatment is not well defined in the literature. Using the rate of total hip arthroplasty as a surrogate measure for symptomatic hip degeneration, the rate of total hip arthroplasty was compared in Legg Calve Perthes disease patients with and without previous surgical intervention in the province of Manitoba, Canada. A retrospective review was conducted using de-identified, individual-level administrative records of health services for the entire population of Manitoba. Codes for Legg Calve Perthes disease, femoral osteotomies, pelvic osteotomies, adductor tenotomies, and total hip arthroplasty were searched from 1984 to 2018. The rate of total hip arthroplasty in patients with Legg Calve Perthes disease was determined for two groups: (1) patients with earlier surgical intervention and (2) patients with no previous surgical intervention. Of the 202 patients included in the study, 180 had no prior surgery and 22 had prior surgery. The rate of total hip arthroplasty between the previous operative and nonoperative groups was found to be 32% and 40%, respectively (p = 0.458). There was no significant difference in rates of total hip arthroplasty in the operative and nonoperative groups. Further prospective studies are required to elucidate the differences in outcomes between operative and nonoperative treatment groups in patients with Legg Calve Perthes disease.

Revision Arthroplasty for Bilateral McKee-Farrar Hip Prostheses 48 Years Following Implantation.

The McKee-Farrar hip prosthesis gained popularity in the 1960s and was one of the first widely used prostheses to employ a metal-on-metal design. Eventually, it laid the framework for the development of second and third-generation hip replacement prostheses. In time, the McKee-Farrar prosthesis was found to have high rates of early aseptic loosening and fell out of favor, especially with the development of the Charnley low-friction metal-on-polyethylene design. We present an interesting case of a patient who underwent bilateral total hip arthroplasty with a McKee-Farrar hip prostheses at the young age of 28 years, in view of secondary hip osteoarthritis resulting from ankylosing spondylitis. The implants lasted approximately 48 years after initial implantation in this case, which is an unusually long survival of this prosthesis. He presented to us at the age of 76 years with groin pain and difficulty to weight-bear, worse on the right side. Significant osteolysis around the acetabular component was noted, greater on the right side. Infection was excluded, and the patient underwent staged revision bilateral hip replacements one year apart. Extraction of the femoral components on both sides was done with the aid of extended trochanteric osteotomies. For both revisions, uncemented acetabular revision shells (TMARS, Zimmer Biomet, Warsaw, Indiana) were used for the acetabulum and long uncemented diaphyseal engaging interlocked stems (Arcos ILS, Zimmer Biomet) were used for the femoral side. No complications were encountered during the procedures. The patient made excellent progress following the procedures with immediate weight-bearing, as tolerated, and physiotherapy input. No subsequent postoperative complications occurred till the time of the patient's death five years later from unrelated medical causes. It is rare to encounter and revise the McKee-Farrar prosthesis in modern orthopaedic practice. This, to the best of our knowledge, is the longest-described survival of this prosthesis in literature.

Effects of Chemotherapy on the Immune System: Implications for Cancer Treatment and Patient Outcomes.

Chemotherapy is a cornerstone of cancer treatment, but it can also induce immune suppression, which can have significant implications for patient outcomes. This review paper aims to give a general overview of how chemotherapy affects the immune system and how it affects cancer treatment. Chemotherapy can directly affect immune cells, leading to cytotoxic effects, cell differentiation and function alterations, and cell communication and signaling pathways disruptions. Such immune suppression can weaken the anti-tumor immune response and increase the risk of immune-related toxicities. Understanding the mechanisms of chemotherapy-induced immune suppression is crucial for optimizing treatment strategies. Strategies to mitigate immune suppression include immunomodulatory agents as adjuvants to chemotherapy, combination therapies to enhance immune function, and supportive care measures of the immune system. Additionally, identifying potential biomarkers to predict immune suppression and guide treatment decisions holds promise for personalized cancer medicine. Future directions in this field involve further elucidating underlying mechanisms, exploring novel combination therapies, and developing targeted interventions to minimize immune suppression. By understanding and addressing chemotherapy-induced immune suppression, we can optimize cancer treatment strategies, enhance the anti-tumor immune response, and improve patient outcomes.

Nucleus accumbens shell neurons' early sensitivity to cocaine is associated with future increases in drug intake.

The striatum, both dorsal and ventral, is strongly implicated in substance use disorder. Chronic consumption of abused substances, such as cocaine, can cause an oversaturation of mesostriatal dopamine, which results in alterations in the firing of striatal neurons. While most preclinical studies of drug self-administration (S-A) are focused on these alterations, individual differences in a subject's early responses to drugs can also account for substantial differences in addiction susceptibility. In this study, we modeled longitudinal pharmacokinetics using data from a previous longitudinal study (Coffey et al., 2015) and aimed to determine if firing in specific dorsal and ventral striatal subregions was subject to changes across chronic cocaine S-A, and if individual animal differences in striatal firing in response to early drug exposure correlated with increases in drug intake. We observed that the firing patterns of nucleus accumbens (NAc) core and shell neurons exhibited increasing sensitivity to cocaine over the first 6 S-A sessions and maintained a strong negative correlation between drug intake and neuronal firing rates across chronic S-A. Moreover, we observed that the early sensitivity of NAc shell neurons to cocaine correlated with future increases in drug intake. Specifically, rats whose NAc shell neurons were most inhibited by increasing levels of cocaine upon first exposure exhibited the strongest increases in cocaine intake over time. If this difference can be linked to a genetic difference, or druggable targets, it may be possible to screen for similar addiction susceptibility in humans or develop novel preemptive pharmacotherapies.

Hexanary blends: a strategy towards thermally stable organic photovoltaics.

Non-fullerene based organic solar cells display a high initial power conversion efficiency but continue to suffer from poor thermal stability, especially in case of devices with thick active layers. Mixing of five structurally similar acceptors with similar electron affinities, and blending with a donor polymer is explored, yielding devices with a power conversion efficiency of up to 17.6%. The hexanary device performance is unaffected by thermal annealing of the bulk-heterojunction active layer for at least 23 days at 130 °C in the dark and an inert atmosphere. Moreover, hexanary blends offer a high degree of thermal stability for an active layer thickness of up to 390 nm, which is advantageous for high-throughput processing of organic solar cells. Here, a generic strategy based on multi-component acceptor mixtures is presented that permits to considerably improve the thermal stability of non-fullerene based devices and thus paves the way for large-area organic solar cells.

Complications and Outcomes of the Internal Fixation of Non-displaced Femoral Neck Fracture in Old Patients: A Two-Year Follow-Up.

Background Fractures of the proximal femur are amongst the most common injuries in the elderly population. While there is a clear consensus regarding the management of displaced femoral neck fractures, the management of non-displaced fractures is less clear. Both fixation and arthroplasty are valid treatment options. Internal fixation is a less invasive procedure, but it carries the risks of non-union and avascular necrosis (AVN) of the femoral head. The literature describes varying complication rates associated with these risks. We aim to describe a series of elderly patients above the age of 65 years with non-displaced fractures of the femoral neck who were treated with internal fixation. Our objectives are to determine the union rate and complications in this group and to elucidate the factors that influence these outcomes. Methods We conducted a retrospective review of all patients aged 65 years and older who presented with femoral neck fractures at our level 1 trauma unit between 2018 and 2020. Fractures were classified using the Garden classification system, and only those with Garden 1 or 2 fractures (non-displaced) were included. Preoperative radiographs or intraoperative fluoroscopy images were used to classify fractures using the Pauwels classification. Serial postoperative radiographs and clinical notes (up to 24 months postoperatively) were reviewed to assess the union rate and the development of complications. Both non-union and AVN were analysed for their associations with age, sex, Pauwels grade and comorbidities. A subgroup analysis of the complications was performed to elucidate their association with age groups (<80 and >80 years) and types of fixations (dynamic hip screws {DHS} and cannulated screws). Results A total of 148 patients, consisting of 60 males and 88 females, were included in the analysis. The patients had a mean age of 78.5 years (ranging from 65 to 98 years). The union rate without any degree of AVN was 90.7%, with six non-unions (4.05%) and six patients experiencing AVN (4.05%). No difference in outcome was detected between the two groups based on age. High (type 2 or 3) Pauwels grade (p = 0.05) and treatment with cannulated screws (p = 0.02) were indicated as significant factors for non-union. All patients who developed AVN were noted to have a comorbidity that is known to predispose them to AVN. Conclusion Our series shows a union rate of 90.7%, which is comparable to the union rates reported in other published literature. Our results suggest that age does not independently influence the outcome of fixation for these fractures. We conclude that fractures with vertical orientation (Pauwels grade 2 or 3), when treated with cannulated screws, are more likely to result in non-union. AVN is the second most common complication after non-union, which is also associated with other risk factors for AVN.

Nanoparticle-Based Interventions for Liver Transplantation.

Liver transplantation is the only treatment for hepatic insufficiency as a result of acute and chronic liver injuries/pathologies that fail to recover. Unfortunately, there remains an enormous and growing gap between organ supply and demand. Although recipients on the liver transplantation waitlist have significantly higher mortality, livers are often not allocated because they are (i) classified as extended criteria or marginal livers and (ii) subjected to longer cold preservation time (>6 h) with a direct correlation of poor outcomes with longer cold ischemia. Downregulating the recipient's innate immune response to successfully tolerate a graft having longer cold ischemia times or ischemia-reperfusion injury through induction of immune tolerance in the graft and the host would significantly improve organ utilization and post-transplant outcomes. Broadly, technologies proposed for development aim to extend the life of the transplanted liver through post-transplant or recipient conditioning. In this review, we focus on the potential benefits of nanotechnology to provide unique pre-transplant grafting and recipient conditioning of extended criteria donor livers using immune tolerance induction and hyperthermic pre-conditioning.

Design of a temperature-feedback controlled automated magnetic hyperthermia therapy device.

Introduction: Magnetic hyperthermia therapy (MHT) is a minimally invasive adjuvant therapy capable of damaging tumors using magnetic nanoparticles exposed radiofrequency alternating magnetic fields. One of the challenges of MHT is thermal dose control and excessive heating in superficial tissues from off target eddy current heating. Methods: We report the development of a control system to maintain target temperature during MHT with an automatic safety shutoff feature in adherence to FDA Design Control Guidance. A proportional-integral-derivative (PID) control algorithm was designed and implemented in NI LabVIEW®. A standard reference material copper wire was used as the heat source to verify the controller performance in gel phantom experiments. Coupled electromagnetic thermal finite element analysis simulations were used to identify the initial controller gains. Results: Results showed that the PID controller successfully achieved the target temperature control despite significant perturbations. Discussion and Conclusion: Feasibility of PID control algorithm to improve efficacy and safety of MHT was demonstrated.

Validation of a Temperature-Feedback Controlled Automated Magnetic Hyperthermia Therapy Device.

We present in vivo validation of an automated magnetic hyperthermia therapy (MHT) device that uses real-time temperature input measured at the target to control tissue heating. MHT is a thermal therapy that uses heat generated by magnetic materials exposed to an alternating magnetic field. For temperature monitoring, we integrated a commercial fiber optic temperature probe containing four gallium arsenide (GaAs) temperature sensors. The controller device used temperature from the sensors as input to manage power to the magnetic field applicator. We developed a robust, multi-objective, proportional-integral-derivative (PID) algorithm to control the target thermal dose by modulating power delivered to the magnetic field applicator. The magnetic field applicator was a 20 cm diameter Maxwell-type induction coil powered by a 120 kW induction heating power supply operating at 160 kHz. Finite element (FE) simulations were performed to determine values of the PID gain factors prior to verification and validation trials. Ex vivo verification and validation were conducted in gel phantoms and sectioned bovine liver, respectively. In vivo validation of the controller was achieved in a canine research subject following infusion of magnetic nanoparticles (MNPs) into the brain. In all cases, performance matched controller design criteria, while also achieving a thermal dose measured as cumulative equivalent minutes at 43 °C (CEM43) 60 ± 5 min within 30 min.

Cryopreservation of Whole Rat Livers by Vitrification and Nanowarming.

Liver cryopreservation has the potential to enable indefinite organ banking. This study investigated vitrification-the ice-free cryopreservation of livers in a glass-like state-as a promising alternative to conventional cryopreservation, which uniformly fails due to damage from ice formation or cracking. Our unique "nanowarming" technology, which involves perfusing biospecimens with cryoprotective agents (CPAs) and silica-coated iron oxide nanoparticles (sIONPs) and then, after vitrification, exciting the nanoparticles via radiofrequency waves, enables rewarming of vitrified specimens fast enough to avoid ice formation and uniformly enough to prevent cracking from thermal stresses, thereby addressing the two main failures of conventional cryopreservation. This study demonstrates the ability to load rat livers with both CPA and sIONPs by vascular perfusion, cool them rapidly to an ice-free vitrified state, and rapidly and homogenously rewarm them. While there was some elevation of liver enzymes (Alanine Aminotransferase) and impaired indocyanine green (ICG) excretion, the nanowarmed livers were viable, maintained normal tissue architecture, had preserved vascular endothelium, and demonstrated hepatocyte and organ-level function, including production of bile and hepatocyte uptake of ICG during normothermic reperfusion. These findings suggest that cryopreservation of whole livers via vitrification and nanowarming has the potential to achieve organ banking for transplant and other biomedical applications.

Percutaneous Retrograde Technique Using Intramedullary Headless Compression Screws for Metacarpal Fractures Under Wide-Awake Local Anaesthesia No Tourniquet.

Background The common modality of treatment of metacarpal fractures is nonsurgical. There are, however, a subset of patients and fracture types that require surgical correction, but surgery comes with its own problems like stiffness and scarring. Therefore, surgical operations must be minimally invasive barring complications of anaesthesia and the procedure. Therefore, we conducted this study to assess patient outcomes following treatment with percutaneous intramedullary screw fixation via the wide-awake local anaesthesia no tourniquet (WALANT) approach for unstable metacarpal fractures. Methodology We retrospectively analysed the records of 21 patients who received metacarpal fixations with headless compression screws at two district general hospitals in the United Kingdom from 2018 to 2020. We used wide-awake anaesthesia with 10 mL (1% lidocaine and 1 mL 8.4% sodium bicarbonate as a buffer) infiltrated around the superficial tissues on the dorsal aspect of the metacarpal bone, including the periosteum. The Jahss manoeuvre was used to reduce the fracture under the guidance of a mini C-arm. All patients had 3-mm Medartis cannulated compression screws (Medartis AG, Basel, Switzerland) (self-tapping) inserted retroactively using a 5-mm skin incision. The range of movement of the metacarpophalangeal joint was checked intraoperatively and shown to the patient for optimal postoperative rehabilitation. Patients underwent a two-week follow-up wound check and examination for pain (using the visual analogue scale (VAS)) or stiffness requiring physiotherapy. We used the Manchester-modified (M2) disability of the arm, shoulder, and hand (DASH) score to scrutinize the fracture union and the functional outcome of the hand. We also assessed the time to return to work. Results The study included 18 men and two women with a mean age of 22.6 years (range, 18 to 40). The fifth (n=16), fourth (n=4), and second metacarpals (n=1) were involved, and we saw transverse (n=10) and short oblique (n=11) fractures. Fractures healed in five weeks (range, four to six weeks). The mean M2 DASH score was 0.8 (range, 0 to 6), and mean total active motion was 240° (range, 230° to 260°). At the final follow-up, the mean extensor lag for the metacarpophalangeal joint was 5° (range, 0° to 15°), 7° for the proximal interphalangeal joint (range, 0° to 15°), and no lag at the distal interphalangeal joint. The average VAS score at the end of two weeks was 8/10 (range, 7 to 9). The average time for the return to daily activities was 2.56 weeks. We found no intraoperative complications in any of the patients. All patients went home on the same day postoperatively and gave feedback that their experience with WALANT was good to excellent. All patients had a good range of motion at the two-week follow-up, and the mean time to return to normal work was two to three weeks. The M2 DASH score measured was satisfactory. Conclusions This retrospective study assessed patient outcomes following treatment with percutaneous intramedullary screw fixation via the WALANT approach for unstable metacarpal fractures. WALANT was a quick and reliable alternative to fix unstable metacarpal fractures, especially for high-demand patients requiring a short recovery period before returning to regular activity. Further research with a larger sample size and a longer follow-up to analyse the outcome is warranted before an actual guideline can be established.

Locking mechanism failure between tibial baseplate and polyethylene insert in cruciate retaining total knee arthroplasty.

We describe a case of total knee arthroplasty performed with one type of cruciate retaining knee prosthesis (Vanguard CR, Zimmer Biomet), wherein failure of locking mechanism occurred between the tibial baseplate and the polyethylene insert 10 months after initial surgery. While there are very few case reports in literature describing such locking mechanism failure, all of these have been in constrained and posterior stabilized knees. This case, to the best of our knowledge is the first such case seen with a cruciate retaining knee design. A 73-year old lady, having undergone left total knee arthroplasty with the above-mentioned prosthesis, presented 10 months after the index surgery with a 3-week history of worsening knee pain and medially protruding hardware. She mentioned an episode of minor twisting of her knee after which she developed pain and swelling over the medial aspect, and was found to have the locking bar backed out on X-rays. She underwent revision surgery, wherein the locking bar was found to have buttonholed through the medial capsule. She underwent polyethylene liner exchange, with a new locking bar. There was no evidence of infection. Her symptoms fully settled following revision surgery.