Concentration Dependent Asymmetric Synergy in SDS-DDAO Mixed Surfactant Micelles.

We investigate the structure and interactions of a model anionic/amphoteric mixed surfactant micellar system, namely, sodium dodecyl sulfate (SDS) and N,N-dimethyldodecylamine N-oxide (DDAO), employing SANS, FTIR, DLS, and pH measurements, in the range 0.1-100 mM total surfactant concentration and 0-100% DDAO. Increasing surfactant concentration is found to elongate the prolate ellipsoid micelles (RPolar ∼ 25-40 Å), accompanied by up to a 6-fold increase in micellar charge. The surfactant synergy, in terms of micellar charge and size, diffusion coefficient, solution pH, and headgroup interactions, was found to vary with concentration. At lower concentrations (≤50 mM), the SDS-DDAO ratio of maximum synergy is found to be asymmetric (at 65-85% DDAO), which is rationalized using regular solution theory, suggesting an equilibrium between Na+ dissociation, DDAO protonation, and counterion concentration. At higher concentrations, maximum synergy shifts toward the equimolar ratio. Overall, our study expands and unifies previous reports, providing a comprehensive understanding for this model, synergetic mixed micellar system.

Breath Figure Assembly on Evaporating Polymer Solution Droplets in Levitation.

We investigate the drying of isolated polymer solution droplets, employing acoustic levitation, and demonstrate the spontaneous generation of breath figures (BF) on the resulting polymer particles and capsules (∼5-1000 µm) with controlled surface pore arrays (<1-20 µm). By contrast with supported polymer thin films, the evaporative cooling experienced by suspended droplets suffices to yield ubiquitous BF formation, owing to their thermal insulation and the synchronous condensation and self-assembly of water microdroplets, accompanied by capsule skin formation and kinetic arrest. A simple model describes simultaneously the radius and temperature evolution along the droplet-to-particle transformation, and the scaling of surface pore dimensions, with environmental parameters. The generality of the approach is demonstrated with a range of model polymers, and the coupled roles of solution thermodynamics and droplet environment are shown to permit the facile design of capsules with tunable transport and dissolution kinetics.

Thermodynamics of Highly Interacting Blend PCHMA/dPS by TOF-SANS.

We investigate the thermodynamics of a highly interacting blend of poly(cyclohexyl methacrylate)/deuterated poly(styrene) (PCHMA/dPS) with small-angle neutron scattering (SANS). This system is experimentally challenging due to the proximity of the blend phase boundary (>200 °C) and degradation temperatures. To achieve the large wavenumber q-range and flux required for kinetic experiments, we employ a SANS diffractometer in time-of-flight (TOF) mode at a reactor source and ancillary microscopy, calorimetry, and thermal gravimetric analysis. Isothermal SANS data are well described by random-phase approximation (RPA), yielding the second derivative of the free energy of mixing (G″), the effective interaction (χ̅) parameter, and extrapolated spinodal temperatures. Instead of the Cahn-Hilliard-Cook (CHC) framework, temperature (T)-jump experiments within the one-phase region are found to be well described by the RPA at all temperatures away from the glass transition temperature, providing effectively near-equilibrium results. We employ CHC theory to estimate the blend mobility and G″(T) conditions where such an approximation holds. TOF-SANS is then used to precisely resolve G″(T) and χ̅(T) during T-jumps in intervals of a few seconds and overall timescales of a few minutes. PCHMA/dPS emerges as a highly interacting partially miscible blend, with a steep dependence of G″(T) [mol/cm3] = -0.00228 + 1.1821/T [K], which we benchmark against previously reported highly interacting lower critical solution temperature (LCST) polymer blends.

Solution Structures of Anionic-Amphoteric Surfactant Mixtures near the Two-Phase Region at Fixed pH.

We examine the solution structures in a mixed surfactant system of sodium dodecyl sulfate (SDS) and N,N-dimethyldodecylamine N-oxide (DDAO) in water, on both sides of the two-phase boundary, employing dynamic light scattering, small-angle neutron scattering, and Fourier transform infrared spectroscopy. The precipitate phase boundary was accessed by lowering pH to 8, from its floating pH 9.5 value, and was experimentally approached from the monomeric and micellar regions in three ways: at fixed DDAO or SDS concentrations and at a fixed (70:30) SDS:DDAO molar ratio. We characterize the size, shape, and interactions of micelles, which elongate approaching the boundary, leading to the formation of disk-like aggregates within the biphasic region, coexisting with micelles and monomers. Our data, from both monomeric and micellar solutions, indicate that the two phase structures formed are largely pathway-independent, with dimensions influenced by both pH and mixed surfactant composition. Precipitation occurs at intermediate stoichiometries with a similar SDS:DDAO ratio, whereas asymmetric stoichiometries form a re-entrant transition, returning to the mixed micelle phase. Overall, our findings demonstrate the effect of stoichiometry and solution pH on the synergistic interaction of mixed surfactants and their impact on phase equilibrium and associated micellar and two-phase structures.

SANS Study of PPPO in Mixed Solvents and Impact on Polymer Nanoprecipitation.

We investigate the conformation of poly(2,6-diphenyl-p-phenylene oxide) (PPPO) in good and mixed solvents by small-angle neutron scattering (SANS) across its ternary phase diagram. Dichloromethane was selected as a "good" solvent and heptane as a "poor" solvent whose addition eventually induces demixing and polymer precipitation. Below the overlap concentration c*, the polymer conformation is found to be well described by the polymer-excluded volume model and above by the Ornstein-Zernike expression with a correlation length ξ which depends on the concentration and solvent/nonsolvent ratio. We quantify the decrease in polymer radius of gyration R g , increase in ξ, and effective χ parameter approaching the phase boundary. Upon flash nanoprecipitation, the characteristic particle radius (estimated by scanning electron microscopy, SEM) is found to scale with polymer concentration as well as with nonsolvent content. Significantly, the solution volume per precipitated particle remains nearly constant at all polymer concentrations. Overall, our findings correlate ternary solution structure with the fabrication of polymer nanoparticles by nonsolvent-induced phase separation and precipitation.

Light Responsiveness and Assembly of Arylazopyrazole-Based Surfactants in Neat and Mixed CTAB Micelles.

The self-assembly of an arylazopyrazole-based photosurfactant (PS), based on cetyltrimethylammonium bromide (CTAB), and its mixed micelle formation with CTAB in aqueous solution was investigated by small angle neutron and X-ray scattering (SANS/SAXS) and UV-vis absorption spectroscopy. Upon UV light exposure, PS photoisomerizes from E-PS (trans) to Z-PS (cis), which transforms oblate ellipsoidal micelles into smaller, spherical micelles with larger shell thickness. Doping PS with CTAB resulted in mixed micelle formation at all stoichiometries and conditions investigated; employing selectively deuterated PS, a monotonic variation in scattering length density and dimensions of the micellar core and shell is observed for all contrasts. The concentration- and irradiance-dependence of the E to Z configurational transition was established in both neat and mixed micelles. A liposome dye release assay establishes the enhanced efficacy of photosurfactants at membrane disruption, with E-PS exhibiting a 4-fold and Z-PS a 10-fold increase in fluorescence signal with respect to pure CTAB. Our findings pave the way for external triggering and modulation of the wide range of CTAB-based biomedical and material applications.

Growth of Myelin Figures from Parent Multilamellar Vesicles.

We examine the formation and growth of isolated myelin figures and microscale multilamellar tubules from isotropic micellar solutions of an anionic surfactant. Upon cooling, surfactant micelles transform into multilamellar vesicles (MLVs) whose contact is found to trigger the unidirectional growth of myelins. While the MLV diameter grows as dMLV ∝ t1/2, myelins grow linearly in time as LM ∝ t1, with a fixed diameter. Combining time-resolved small-angle neutron scattering (SANS) and optical microscopy, we demonstrate that the microscopic growth of spherical MLVs and cylindrical myelins stems from the same nanoscale molecular mechanism, namely, the surfactant exchange from micelles into curved lamellar structures at a constant volumetric rate. This mechanism successfully describes the growth rate of (nonequilibrium) myelin figures based on a population balance at thermodynamic equilibrium.

Ionotropic Gelation Fronts in Sodium Carboxymethyl Cellulose for Hydrogel Particle Formation.

Hydrogel microparticles (HMPs) find numerous practical applications, ranging from drug delivery to tissue engineering. Designing HMPs from the molecular to macroscopic scales is required to exploit their full potential as functional materials. Here, we explore the gelation of sodium carboxymethyl cellulose (NaCMC), a model anionic polyelectrolyte, with Fe3+ cations in water. Gelation front kinetics are first established using 1D microfluidic experiments, and effective diffusive coefficients are found to increase with Fe3+ concentration and decrease with NaCMC concentrations. We use Fourier Transform Infrared Spectroscopy (FTIR) to elucidate the Fe3+-NaCMC gelation mechanism and small angle neutron scattering (SANS) to spatio-temporally resolve the solution-to-network structure during front propagation. We find that the polyelectrolyte chain cross-section remains largely unperturbed by gelation and identify three hierarchical structural features at larger length scales. Equipped with the understanding of gelation mechanism and kinetics, using microfluidics, we illustrate the fabrication of range of HMP particles with prescribed morphologies.

Surface-Induced Crystallization of Sodium Dodecyl Sulfate (SDS) Micellar Solutions in Confinement.

We investigate the role of confinement on the onset of crystallization in subcooled micellar solutions of sodium dodecyl sulfate (SDS), examining the impact of sample volume, substrate surface energy, and surface roughness. Using small angle neutron scattering (SANS) and dynamic light scattering (DLS), we measure the crystallization temperature upon cooling and the metastable zone width (MSZW) for bulk 10-30 wt% SDS solutions. We then introduce a microdroplet approach to quantify the impact of surface free energy (18-65 mN/m) and substrate roughness (Rα ≃ 0-60 µm) on the kinetics of surface-induced crystallization through measurements of induction time (ti) under isothermal conditions. While ti is found to decrease exponentially with decreasing temperature (increasing subcooling) for all tested surfaces, increasing the surface energy could cause a significant further reduction of up to ∼40 fold. For substrates with the lowest surface energy and longest ti, microscale surface roughness is found to enhance crystal nucleation, in particular for Rα ≥ 10 µm. Finally, we demonstrate that tuning the surface energy and microscopic roughness can be effective routes to promote or delay nucleation in bulk-like volumes, thus greatly impacting the stability of surfactant solutions at lower temperatures.

Pure and mixed aqueous micellar solutions of Sodium Dodecyl sulfate (SDS) and Dimethyldodecyl Amine Oxide (DDAO): Role of temperature and composition.

Aqueous mixtures of anionic and nonionic/cationic surfactants can form non-trivial self-assemblies in solution and exhibit macroscopic responses. Here, we investigate the micellar phase of pure and mixed aqueous solutions of Sodium Dodecyl Sulfate (SDS) and Dimethyldodecyl Amine Oxide (DDAO) using a combination of Small Angle Neutron Scattering (SANS), Fourier-Transform Infrared Spectroscopy (FTIR) and rheological measurements. We examine the effect of temperature (0-60 °C), on the 20 wt% SDS micellar solutions with varying DDAO (⩽5 wt%), and seek to correlate micellar structure with zero-shear solution viscosity. SANS establishes the formation of prolate ellipsoidal micelles in aqueous solutions of pure SDS, DDAO and SDS/DDAO mixtures, whose axial ratio is found to increase upon cooling. Elongation of the ellipsoidal micelles of pure SDS is also induced by the introduction of the non-anionic DDAO, which effectively reduces the repulsive interactions between the anionic SDS head-groups. In FTIR measurements, the formation of elongated mixed ellipsoidal micelles is confirmed by the increase of ordering in the hydrocarbon chain tails and interaction between surfactant head-groups. We find that the zero-shear viscosity of the mixed surfactant solutions increases exponentially with decreasing temperature and increasing DDAO content. Significantly, a master curve for solution viscosity can be obtained in terms of micellar aspect ratio, subsuming the effects of both temperature and DDAO composition in the experimental range investigated. The intrinsic viscosity of mixed micellar solutions is significantly larger than the analytical and numerical predictions for Brownian suspensions of ellipsoidal colloids, highlighting the need to consider interactions of soft micelles under shear, especially at high concentrations.

Micellar structure and transformations in sodium alkylbenzenesulfonate (NaLAS) aqueous solutions: effects of concentration, temperature, and salt.

We investigate the shape, dimensions, and transformation pathways of micelles of linear sodium alkylbenzenesulfonate (NaLAS), a common anionic surfactant, in aqueous solution. Employing Small Angle Neutron Scattering (SANS) and surface tensiometry, we quantify the effects of surfactant concentration (0.6-15 wt%), temperature (5-40 °C) and added salt (≤0.35 M Na2SO4). Spherical micelles form at low NaLAS (≤2.6 wt%) concentration in water, and become elongated with increasing concentration and decreasing temperature. Addition of salt reduces the critical micelle concentration (CMC) and thus promotes the formation of micelles. At fixed NaLAS concentration, salt addition causes spherical micelles to grow into cylindrical micelles, and then multilamellar vesicles (MLVs), which we examine by SANS and cryo-TEM. Above a threshold salt concentration, the MLVs reach diameters of 100 s of nm to few µm, eventually causing precipitation. While the salt concentrations associated with the micelle-to-cylinder transformation increase only slightly with temperature, those required for the cylinder-to-MLV transformation exhibit a pronounced, linear temperature dependence, which we examine in detail. Our study establishes a solution structure map for this model anionic surfactant in water, quantifying the combined roles of concentration, temperature and salt, at practically relevant conditions.