Mixed convection of two layers with radiative electro-magnetohydrodynamics nanofluid flow in vertical enclosure.

Mixed convection flow of two layers nanofluid in a vertical enclosure is studied. The channel consists of two regions. Region I is electrically conducting while Region II is electrically non-conducting. Region I is filled with base fluid water with copper oxides nanoparticles and Region II is filled with base fluid kerosene oil with iron oxides. The simultaneous effects of electro-magnetohydrodynamics and Grashof number are also taken into account. The governing flow problem consists of nonlinear coupled differential equations which is tackled using analytical technique. Analytical results have been obtained by the homotopy analysis method (HAM). The results for the leading parameters, such as the Hartmann numbers, Grashof numbers, ratio of viscosities, width ratio, volume fraction of nanoparticles, and the ratio of thermal conductivities for three different electric field scenarios under heat generation/absorption were examined. It is found that the effect of the negative electric load parameter assists the flow while the effect of the positive electric load parameter opposes the flow as compared to the case when the electric load parameter is zero. All outcomes for significant parameters on velocity and temperature are discussed graphically.

High thermoelectric performance of two-dimensional SiPGaS/As heterostructures.

Thermoelectric technology holds great promise as a green and sustainable energy solution, generating electric power directly from waste heat. Herein, we investigate the thermoelectric properties of SiPGaS/As van der Waals heterostructures by using computations based on density functional theory and semiclassical Boltzmann transport theory. Our results show that both models of SiPGaS/As van der Waals heterostructures have low lattice thermal conductivity at room temperature (300 K). Applying 4% tensile strain to the models leads to a significant enhancement in the figure of merit (ZT), with model-I and model-II exhibiting ZT improvements of up to 24.5% and 14.8%, respectively. Notably, model-II outperforms all previously reported heterostructures in terms of ZT value. Additionally, we find that the maximum thermoelectric conversion efficiency (η) for model-II at 4% tensile strain reaches 23.98% at 700 K. Our predicted ZTavg > 1 suggests that these materials have practical potential for thermoelectric applications over a wide temperature range. Overall, our findings offer valuable insights for designing better thermoelectric materials.

Two-dimensional van der Waals heterostructures (vdWHs) with band alignment transformation in multi-functional devices.

Two-dimensional van der Waals heterostructures (vdWHs) with tunable band alignment have the potential to be benignant in the development of minimal multi-functional and controllable electronics, but they have received little attention thus far. It is crucial to characterize and control the band alignment in semiconducting vdWHs, which determines the electronic and optoelectronic properties. The future success of optoelectronic devices will require improved electronic property control techniques, such as using an external electric field or strain engineering, to change the electronic structures directly. Herein, we review heterostructures fabricated as transition metal dichalcogenides (TMDCs) as one of their constituent monolayers with other notable 2D materials that can transfer from type-II to type-III (type-III > type-II) band alignment when a biaxial strain or electric field is applied.

First principles study of optoelectronic and photocatalytic performance of novel transition metal dipnictide XP2 (X = Ti, Zr, Hf) monolayers.

Low cost and highly efficient two dimensional materials as photocatalysts are gaining much attention to utilize solar energy for water splitting and produce hydrogen fuel as an alternative to deal with the energy crisis and reduce environmental hazards. First principles calculations are performed to investigate the electronic, optical and photocatalytic properties of novel two dimensional transition metal dipnictide XP2 (X = Ti, Zr, Hf) monolayers. The studied single layer XP2 is found to be dynamically and thermally stable. TiP2, ZrP2 and HfP2 systems exhibit semiconducting nature with moderate indirect band gap values of 1.72 eV, 1.43 eV and 2.02 eV, respectively. The solar light absorption is found to be in energy range of 1.65-3.3 eV. All three XP2 systems (at pH = 7) and the HfP2 monolayer (at pH = 0) that straddle the redox potentials, are promising candidates for the water splitting reaction. These findings enrich the two dimensional family and provide a platform to design novel devices for emerging optoelectronic and photovoltaic applications.

Effects of Radiative Electro-Magnetohydrodynamics Diminishing Internal Energy of Pressure-Driven Flow of Titanium Dioxide-Water Nanofluid due to Entropy Generation.

The internal average energy loss caused by entropy generation for steady mixed convective Poiseuille flow of a nanofluid, suspended with titanium dioxide (TiO2) particles in water, and passed through a wavy channel, was investigated. The models of thermal conductivity and viscosity of titanium dioxide of 21 nm size particles with a volume concentration of temperature ranging from 15 °C to 35 °C were utilized. The characteristics of the working fluid were dependent on electro-magnetohydrodynamics (EMHD) and thermal radiation. The governing equations were first modified by taking long wavelength approximations, which were then solved by a homotopy technique, whereas for numerical computation, the software package BVPh 2.0 was utilized. The results for the leading parameters, such as the electric field, the volume fraction of nanoparticles and radiation parameters for three different temperatures scenarios were examined graphically. The minimum energy loss at the center of the wavy channel due to the increase in the electric field parameter was noted. However, a rise in entropy was observed due to the change in the pressure gradient from low to high.

Modelling Study on Internal Energy Loss Due to Entropy Generation for Non-Darcy Poiseuille Flow of Silver-Water Nanofluid: An Application of Purification.

In this paper, an analytical study of internal energy losses for the non-Darcy Poiseuille flow of silver-water nanofluid due to entropy generation in porous media is investigated. Spherical-shaped silver (Ag) nanosize particles with volume fraction 0.3%, 0.6%, and 0.9% are utilized. Four illustrative models are considered: (i) heat transfer irreversibility (HTI), (ii) fluid friction irreversibility (FFI), (iii) Joule dissipation irreversibility (JDI), and (iv) non-Darcy porous media irreversibility (NDI). The governing equations of continuity, momentum, energy, and entropy generation are simplified by taking long wavelength approximations on the channel walls. The results represent highly nonlinear coupled ordinary differential equations that are solved analytically with the help of the homotopy analysis method. It is shown that for minimum and maximum averaged entropy generation, 0.3% by vol and 0.9% by vol of nanoparticles, respectively, are observed. Also, a rise in entropy is evident due to an increase in pressure gradient. The current analysis provides an adequate theoretical estimate for low-cost purification of drinking water by silver nanoparticles in an industrial process.