Construction of Hierarchical α-MnO2 Nanowires@Ultrathin δ-MnO2 Nanosheets Core-Shell Nanostructure with Excellent Cycling Stability for High-Power Asymmetric Supercapacitor Electrodes.

Poor electrical conductivity and mechanical instability are two major obstacles to realizing high performance of MnO2 as pseudocapacitor material. The construction of unique hierarchical core-shell nanostructures, therefore, plays an important role in the efficient enhancement of the rate capacity and the stability of this material. We herein report the fabrication of a hierarchical α-MnO2 nanowires@ultrathin δ-MnO2 nanosheets core-shell nanostructure by adopting a facile and practical solution-phase technique. The novel hierarchical nanostructures are composed of ultrathin δ-MnO2 nanosheets with a few atomic layers growing well on the surface of the ultralong α-MnO2 nanowires. The first specific capacitance of hierarchical core-shell nanostructure reached 153.8 F g(-1) at the discharge current density of as high as 20 A g(-1), and the cycling stability is retained at 98.1% after 10,000 charge-discharge cycles, higher than those in the literature. The excellent rate capacity and stability of the hierarchical core-shell nanostructures can be attributed to the structural features of the two MnO2 crystals, in which a 1D α-MnO2 nanowire core provides a stable structural backbone and the ultrathin 2D δ-MnO2 nanosheet shell creates more reactive active sites. The synergistic effects of different dimensions also contribute to the superior rate capability.

Effects of ultrasound on the evolution of plasma electrolytic oxidation process on 6061Al alloy.

The plasma electrolytic oxidation (PEO) process of 6061Al alloy was carried out under the conditions with and without the assistance of ultrasound, respectively. The effects of ultrasound on the evolution of voltage, micro-discharge, morphology and composition of PEO coatings were investigated. The results show that ultrasound can greatly decrease the dielectric breakdown voltage of the coatings, increase the number of micro-discharges while decrease their average size, promote the evolution of micro-discharges, decrease the number and the average size of residual discharge pores in the coatings after 30min of the process, promote the homogeneous distribution of elements and the formation of α-Al2O3 and 3Al2O3⋅2SiO2 in the coatings.