ABSTRACT
To investigate the effect of low temperature and catalyst filling pattern on the adsorption of Hg° by DeNOx equipment, the chemisorption and kinetic mechanisms of Hg° adsorption on 5-30%V2O5/TiO2 immobilized on glass beads at 100-160 °C were investigated. The effects of the reaction temperature, influent Hg° concentration, and V2O5 doping amount on the adsorption efficiency and capacity for Hg° were explored. The active sites for Hg° adsorption were further identified. Additionally, the adsorption kinetics were modelled using the linear driving force approximation, Fick's diffusion model, and pseudo-second-order kinetic model. Finally, the influence of immobilization on the adsorption of Hg° was also investigated. Experimental results showed that the bridged oxygen atom of V-O-V played a key role in the adsorption of Hg°. The Hg° adsorption efficiencies decreased from >90% to 40% as the reaction temperature increased from 120 °C to 160 °C for 20%V2O5/TiO2, while the adsorptive capacities for Hg° were highly influenced by the influent Hg° concentration and V2O5 doping amount. 20%V2O5/TiO2 had the highest adsorptive capacity of 2547 µg Hg°/g V2O5/TiO2 at 160 °C. The kinetic results showed that the linear driving force approximation model fit the Hg° adsorption better than the other models. The diffusion resistance increased significantly for the immobilized catalysts because the external mass transfer coefficient decreased by more than 1200-fold.
ABSTRACT
Aeolian dust episodes (ADEs) have been an emergency disaster in the Kaoping River Valley during the rainy season (May-September), which can severely deteriorate ambient particulate air quality in the region surrounding the Kaoping River. Thus, this study aims to characterize the metallic fingerprint of Aeolian dust (AD) and investigate the effects of ADEs on ambient particulate air quality along the Kaoping River Valley. Four manual sampling sites adjacent to the riverside were selected to collect fine (PM2.5) and coarse (PM2.5-10) aerosol samples during and after the ADEs in the periods of six events. A total of 13 metallic elements were analyzed using an inductively coupled plasma-atomic emission spectrometer. With metallic elements analysis and nonparametric statistical methods of Wilcoxon rank-sum test and Kruskal-Wallis test, this study successfully derived the metallic indicators of ADEs. The mass ratios of crustal elements (Fe, Ca, or Al) to reference element (Cd) obtained during the ADEs were much higher than those obtained after the ADEs. High mass ratios of Fe/Cd, Ca/Cd, and Al/Cd in PM2.5-10 were observed on the influenced areas of ADEs. Among them, (Fe/Cd)2.5-10 was proven as the best indicator which can be applied to effectively validate the existence of ADEs and evaluate their influences on ambient air quality. Moreover, PM2.5 concentrations during the ADEs were 3-3.6 fold higher than those after the ADEs. PM2.5 should be a contributor to AD, even though the mass ratios of PM2.5/PM10 ranged from 0.05 to 0.20 during the ADEs. Our findings provide valuable information regarding the characteristics of the AD during the ADEs in the Kaoping River. IMPLICATIONS: Indicators of (Fe/Cd)2.5-10 are approximately applied to observe the effects of ADEs. Local governments could realize the mechanisms of S- and NW-type aeolian dust episodes (ADEs). They can cause deterioration in different ways for the regional air quality surrounding Kaoping River Valley. Residents who have been living in the influenced areas can take precautions to prevent damage from aeolian dust. Strategies for curbing ADEs must reduce the area of bare lands by artificial measures in the long period of the sunny days during the rainy season. Future research should examine physical conditions of topsoils and other chemical composition in aeolian dust.
