Cooperation of Strong Electric Field and H2O Dissociation on Co3O4-Decorated SiC Rods for Photodriven CO2 Methanation with 100% Selectivity.

Solar-driven methanation of carbon dioxide (CO2) with water (H2O) has emerged as an important strategy for achieving both carbon neutrality and fuel production. The selective methanation of CO2 was often hindered by the sluggish kinetics and the multiple competition of other C1 byproducts. To overcome this bottleneck, we utilized a biomass synthesis method to synthesize SiC rods and then constructed a direct Z-scheme heterojunction Co3O4/SiC catalyst. The substantial difference in work functions between SiC and Co3O4 served as a significant source of the charge driving force, facilitating the conversion of CO2 to CH4. The high-valent cobalt Co(IV) in Co3O4 acts as an active species to promote efficient dissociation of water. This favorable condition greatly enhanced the likelihood of a high concentration of electrons and protons around a single site on the catalyst surface for CO2 methanation. DFT calculation showed that the energy barrier of CO2 hydrogenation was significantly reduced at the Co3O4/SiC heterojunction interface, which changed the reaction pathway and completely converted the product from CO to CH4. The optimum CH4 evolution rate of Co3O4/SiC samples was 21.3 µmol g-1 h-1 with 100% selectivity. This study has an important guiding significance for the selective regulation of CO2 to CH4 products in photocatalysis applications.

Enhancing Photocatalytic Activities for Sustainable Hydrogen Evolution on Structurally Matched CuInS2/ZnIn2S4 Heterojunctions.

Effective charge separation and migration pose a critical challenge in the field of solar-driven hydrogen production. In this work, a Z-scheme structured CuInS2/ZnIn2S4 heterojunction was successfully fabricated through a two-step hydrothermal synthesis method to significantly enhance the efficiency of solar-to-hydrogen energy conversion. Structural characterization revealed that the lattice-matched CuInS2/ZnIn2S4 heterojunction exhibits an enlarged interfacial contact area, which facilitates the transfer and separation of photogenerated charges. Microscopic analysis indicated that the CuInS2/ZnIn2S4 composite material has a tightly interwoven interface and a morphology resembling small sugar cubes. Photoelectrochemical spectroscopy analysis demonstrated that the heterojunction structure effectively enhances visible light absorption and charge separation efficiency, leading to an improvement in photocatalytic activity. Hydrogen production experimental data indicated that the CuInS2/ZnIn2S4 heterojunction photocatalyst prepared with a CuInS2 content of 20 wt% exhibits the highest hydrogen evolution rate, reaching 284.9 µmol·g-1·h-1. Moreover, this photocatalyst maintains robust photocatalytic stability even after three consecutive usage cycles. This study demonstrated that the Z-scheme CuInS2/ZnIn2S4 heterojunction photocatalyst exhibits enhanced hydrogen evolution efficiency, offering an effective structural design for harnessing solar energy to obtain hydrogen fuel. Therefore, this heterojunction photocatalyst is a promising candidate for practical applications in solar hydrogen production.

Hydrophobic TaOx Species Overlayer Tuning Light-Driven Methane Chlorination with Inorganic Chlorine.

Halogenated methane serves as a universal platform molecule for building high-value chemicals. Utilizing sodium chloride solution for photocatalytic methane chlorination presents an environmentally friendly method for methane conversion. However, competing reactions in gas-solid-liquid systems leads to low efficiency and selectivity in photocatalytic methane chlorination. Here, an in situ method is employed to fabricate a hydrophobic layer of TaOx species on the surface of NaTaO3. Through in-situ XPS and XANES spectra analysis, it is determined that TaOx is a coordination unsaturated species. The TaOx species transforms the surface properties from the inherent hydrophilicity of NaTaO3 to the hydrophobicity of TaOx/NaTaO3, which enhances the accessibility of CH4 for adsorption and activation, and thus promotes the methane chlorination reaction within the gas-liquid-solid three-phase system. The optimized TaOx/NaTaO3 photocatalyst has a good durability for multiple cycles of methane chlorination reactions, yielding CH3Cl at a rate of 233 µmol g-1 h-1 with a selectivity of 83%. In contrast, pure NaTaO3 exhibits almost no activity toward CH3Cl formation, instead catalyzing the over-oxidation of CH4 into CO2. Notably, the activity of the optimized TaOx/NaTaO3 photocatalyst surpasses that of reported noble metal photocatalysts. This research offers an effective strategy for enhancing the selectivity of photocatalytic methane chlorination using inorganic chlorine ions.

Construction of Co1-xZnxFe2xGa2-2xO4 (02 Reduction by H2O Vapour.

Solid solutions are garnering substantial attention in the realm of solar energy utilization due to their tunable electronic properties, encompassing band edge positions and charge-carrier mobilities. In this study, we designed and synthesized Co1-xZnxFe2xGa2-2xO4 (0

Metal to non-metal sites of metallic sulfides switching products from CO to CH4 for photocatalytic CO2 reduction.

The active center for the adsorption and activation of carbon dioxide plays a vital role in the conversion and product selectivity of photocatalytic CO2 reduction. Here, we find multiple metal sulfides CuInSnS4 octahedral nanocrystal with exposed (1 1 1) plane for the selectively photocatalytic CO2 reduction to methane. Still, the product is switched to carbon monoxide on the corresponding individual metal sulfides In2S3, SnS2, and Cu2S. Unlike the common metal or defects as active sites, the non-metal sulfur atom in CuInSnS4 is revealed to be the adsorption center for responding to the selectivity of CH4 products. The carbon atom of CO2 adsorbed on the electron-poor sulfur atom of CuInSnS4 is favorable for stabilizing the intermediates and thus promotes the conversion of CO2 to CH4. Both the activity and selectivity of CH4 products over the pristine CuInSnS4 nanocrystal can be further improved by the modification of with various co-catalysts to enhance the separation of the photogenerated charge carrier. This work provides a non-metal active site to determine the conversion and selectivity of photocatalytic CO2 reduction.

The Synergistic Effect in CdS/g-C3N4 Nanoheterojunctions Improves Visible Light Photocatalytic Performance for Hydrogen Evolution Reactions.

This study focuses on the development of heterojunction photocatalysts for the efficient utilization of solar energy to address the energy crisis and reduce environmental pollution. Cadmium sulfide (CdS)/graphite-type carbon nitride (g-C3N4) nanocomposites were synthesized using a hydrothermal method, and their photoelectrochemical properties and photocatalytic performance for hydrogen evolution reaction (HER) were characterized. Scanning electron microscope images showed the intimate interface and caviar-like nanoheterojunction of the CdS nanoparticles on g-C3N4 nanospheres, suggesting their potential involvement in the photocatalytic process. Electrochemical and spectroscopic analyses were conducted to confirm the roles of CdS in the nanoheterojunction. The results showed that 10 wt% CdS/g-C3N4 nanospheres exhibited higher photocatalytic activity than pure g-C3N4 under visible light irradiation. A HER rate of 655.5 µmol/g/h was achieved after three photocatalytic cycles, signifying good photocatalytic stability. The synergistic effect of the Z-scheme heterojunction formed by g-C3N4 and CdS was identified as the main factor responsible for the enhanced photocatalytic performance and stability. The interface engineering effect of CdS/g-C3N4 facilitated the separation of photogenerated electrons and holes. This study provides insights into the design and fabrication of efficient HER photocatalysts.

Self-assembly of Ni2P/γ-Ga2O3 nanosheets for efficient photocatalytic water splitting hydrogen production.

The development of photocatalysts enabling stable and highly efficient water splitting hydrogen production remains an open challenge in the field of energy photocatalysis. Herein, Ni2P/γ-Ga2O3 nanosheets have been reported as excellent water splitting photocatalysts. Ni2P particles and γ-Ga2O3 nanosheets were synthesized by a facile hydrothermal process. The Ni2P/γ-Ga2O3 samples were prepared by an electrostatic self-assembly method with Ni2P particles and γ-Ga2O3 nanosheets as precursors. The 0.5 wt% Ni2P/γ-Ga2O3 sample shows a photocatalytic H2-production activity as high as 2.7 mmol g-1 h-1 in pure water and 12 mmol g-1 h-1 in an aqueous methanol solution under a 125 W high pressure mercury lamp, respectively, which are much higher than those of pure γ-Ga2O3 and Pt/γ-Ga2O3 nanosheets modified with a comparable Pt content. The Ni2P component plays a role as an electron collector that promotes efficient separation of photogenerated electrons and holes, and thereby improves the efficiency of photocatalytic hydrogen production. The effects of inorganic and organic sacrificial reagents on the reaction efficiency and stability were observed and discussed. This work shows that Ni2P as a cocatalyst substituting noble metals can greatly improve the photocatalytic hydrogen production efficiency of γ-Ga2O3 compared to that in pure water and a methanol-water solution.

Fabrication of 2H/3C-SiC heterophase junction nanocages for enhancing photocatalytic CO2 reduction.

The morphology and structure of photocatalyst play an important role in photocatalytic activity. SiC semiconductor is considered as a promising material for the photocatalytic CO2 reduction due to its negative conduction band position. Herein, SiC nanocages is creatively synthesized by simple low-temperature molten-salt-mediated magnesiothermic reduction method with using SiO2 as template. The morphology and phase composition of SiC nanocages can be controlled by magnesium dosage and reaction temperature. The 2H and 3C crystal phase in SiC nanocage can form heterophase junctions uniformly to effectively accelerate the photogenerated electron transfer, and plays a key role in improving the photocatalytic activity of 2H/3C-SiC samples. The optimal SiC nanocage sample possesses a CO generation rate of 4.68 µmol g-1h-1 for photocatalytic CO2 reduction, which is 3.25 times higher than that of commercial SiC.

Molecular Dipole-Induced Photoredox Catalysis for Hydrogen Evolution over Self-Assembled Naphthalimide Nanoribbons.

D-π-A type 4-((9-phenylcarbazol-3-yl)ethynyl)-N-dodecyl-1,8-naphthalimide (CZNI) with a large dipole moment of 8.49 D and A-π-A type bis[(4,4'-1,8-naphthalimide)-N-dodecyl]ethyne (NINI) with a negligible dipole moment of 0.28 D, were smartly designed and synthesized to demonstrate the evidence of a molecular dipole as the dominant mechanism for controlling charge separation of organic semiconductors. In aqueous solution, these two novel naphthalimides can self-assemble to form nanoribbons (NRs) that present significantly different traces of exciton dissociation dynamics. Upon photoexcitation of NINI-NRs, no charge-separated excitons (CSEs) are formed due to the large exciton binding energy, accordingly there is no hydrogen evolution. On the contrary, in the photoexcited CZNI-NRs, the initial bound Frenkel excitons are dissociated to long-lived CSEs after undergoing ultrafast charge transfer within ca. 1.25 ps and charge separation within less than 5.0 ps. Finally, these free electrons were injected into Pt co-catalysts for reducing protons to H2 at a rate of ca. 417 µmol h-1 g-1 , correspondingly an apparent quantum efficiency of ca. 1.3 % can be achieved at 400 nm.

Photochemistry of Nitrate Ion: Reduction by Formic Acid under UV Irradiation.

Mutual transformations of various nitrogen compounds and their reaction mechanisms have been a subject of great concern to the chemical, ecological and environmental communities. In the paper, the reactions of NO 3 - ion with small organic acids such as formic acid (HCOOH), acetic acid (CH3 COOH) and lactic acid (C3 H6 O3 ) under ultraviolet illumination were investigated systematically. It was found that NO 3 - ion is easily reduced into NO 2 - and NOx and then further into N2 and NH3 (in the form of NH 4 + ) in the process. The carboxyl anion radicals and hydrogen formed by photodecomposition of formic acid are responsible for the rapid photoreduction reaction of nitrate. The initial pH and the nitrate concentration considerably affect the product distribution and nitrate conversion. Based on a preliminary simulation study, we speculated that the photoinduced reaction may effectively proceed in oceans, lakes and rivers because of ever-increasing nitrate and organic emissions. This research is helpful to understand nitrogen cycle mechanism and develop water environmental control technologies.

Direct and indirect Z-scheme heterostructure-coupled photosystem enabling cooperation of CO2 reduction and H2O oxidation.

The stoichiometric photocatalytic reaction of CO2 with H2O is one of the great challenges in photocatalysis. Here, we construct a Cu2O-Pt/SiC/IrOx composite by a controlled photodeposition and then an artificial photosynthetic system with Nafion membrane as diaphragm separating reduction and oxidation half-reactions. The artificial system exhibits excellent photocatalytic performance for CO2 reduction to HCOOH and H2O oxidation to O2 under visible light irradiation. The yields of HCOOH and O2 meet almost stoichiometric ratio and are as high as 896.7 and 440.7 µmol g-1 h-1, respectively. The high efficiencies of CO2 reduction and H2O oxidation in the artificial system are attributed to both the direct Z-scheme electronic structure of Cu2O-Pt/SiC/IrOx and the indirect Z-scheme spatially separated reduction and oxidation units, which greatly prolong lifetime of photogenerated electrons and holes and prevent the backward reaction of products. This work provides an effective and feasible strategy to increase the efficiency of artificial photosynthesis.

Si2Ge: A New VII-Type Clathrate with Ultralow Thermal Conductivity and High Thermoelectric Property.

Based on global particle-swarm optimization algorithm and density functional theory methods, we predicted an alloyed Si2Ge compond with body centered tetragonal type VII clathrate (space group I4/mmm) built by a truncated octahedron fromed by six quadrangles and eight hexagons ([4668]). Si2Ge clathrate is 0.06 eV/atom lower than VII Si clathrate and thermally stable up to 1000 K. It has an indirect band gap of 0.23 eV, high p-doping Seebeck coefficient and n-doping electrical conductivity. It owns a low lattice thermal conductivity of 0.28 W/mK at 300 K because of its weak bonding and strong anharmonic interaction of longitudinal acoustic and low-lying optical phonons. The moderate electronic transport properties together with low lattice thermal conductivity results in a high optimal thermoeletric performance value of 2.54 (1.49) at 800 (1000) K in n (p)-doped Si2Ge.

Two-dimensional O-phase group III monochalcogenides for photocatalytic water splitting.

The atomically thin group III monochalcogenides have emerged as potential candidates for nanoscale optoelectronic applications due to their tunable bandgaps and high carrier mobility. In this work, by means of ab initio calculations, we have systematically investigated the geometrical structures, electronic structures, and optical properties of the orthogonal phase (O-phase) group III monochalcogenides MX (M = Ga and In, X = S, Se and Te) monolayers, nanoribbons, heterostructures and their potential applications as photocatalysts for water splitting. It is highlighted that the two-dimensional (2D) O-phase MX monolayers not only are dynamically and thermally stable, but also exhibit distinguished optical properties (~105 cm-1) with broad absorption spectrum in the visible and ultraviolet light regions. Furthermore, it is noted that nano-structure designing can further modulate their electronic structures in desirable ways. For instance, the bandgap of O-phase GaTe is relevant to the width of 1D nanoribbon. On the other hand, the type-II InSe/GaTe and InTe/GaTe heterostructures confine the photo-generated electrons and holes at the opposite parts, which is beneficial for the separation of hydrogen and oxygen during the photocatalysis water splitting process.

One-Pot Fabrication of Pd Nanoparticles@Covalent-Organic-Framework-Derived Hollow Polyamine Spheres as a Synergistic Catalyst for Tandem Catalysis.

Facile fabrication of nanocatalysts consisting of metal nanoparticles (NPs) anchored on a functional support is highly desirable, yet remains challenging. Covalent organic frameworks (COFs) provide an emerging materials platform for structural control and functional design. Here, a facile one-pot in situ reduction approach is demonstrated for the encapsulation of small Pd NPs into the shell of COF-derived hollow polyamine spheres (Pd@H-PPA). In the one-pot synthetic process, the nucleation and growth of Pd NPs in the cavities of the porous shell take place simultaneously with the reduction of imine linkages to secondary amine groups. Pd@H-PPA shows a significantly enhanced catalytic activity and recyclability in the tandem dehydrogenation of ammonia borane and selective hydrogenation of nitroarenes through an adsorption-activation-reaction mechanism. The strong interactions of the secondary amine linkage with borane and nitroarene molecules afford a positive synergy to promote the catalytic reaction. Moreover, the hierarchical structure of Pd@H-PPA allows the accessibility of active Pd NPs to reactants.

A chemical-bond-driven edge reconstruction of Sb nanoribbons and their thermoelectric properties from first-principles calculations.

We present a theoretical study on the potential thermoelectric performance of antimony nanoribbons (SNRs). Based on density functional theory and the semiclassical transport model, the thermoelectric figure of merit ZT was calculated for various Sb nanoribbon sizes and different chiralities. The results indicated that the chemical-bond-driven edge reconstruction of nanoribbons (denoted as SNRs-recon) eliminated all of the dangling bonds and passivated all of the boundary antimony atoms with 3-fold coordination. SNRs-recon are the most energy favorable compared to the ribbons with unsaturated edge atoms. Semimetal to semiconductor transition occurred in SNRs-recon. The band gap was width-dependent in armchair SNRs (denoted as ASNRs-recon), whereas it was width-independent in zigzag SNRs (ZSNRs-recon). After nanolization and reconstruction, the TE properties of SNRs were enhanced due to higher Seebeck coefficient and lower thermal conductivity. The thermoelectric properties of n-doped ASNRs-recon and p-doped ZSNRs-recon showed width-dependent odd-even oscillation and eventually resulted in ZT values of 0.75 and 0.60, respectively. Upon increasing the ribbon width, ZT of n-doped ASNRs-recon decreased and approached a constant value of about 0.85. However, n-doped ZSNRs-recon exhibited poor TE performance compared with the others. Importantly, the ZT value could be optimized to as high as 1.91 at 300 K, which was larger than those of Sb-based bulk materials and 100 times that of thin Sb films. These optimizations make the materials promising room-temperature high-performance thermoelectric materials. Furthermore, the proposed new concept of chemical-bond-driven edge reconstruction may be useful for many other related systems.

Constructing a novel family of halogen-doped covalent triazine-based frameworks as efficient metal-free photocatalysts for hydrogen production.

Halogens, as typical non-metal dopants, have attracted intensive interests for developing highly active photocatalysts. However, the essential factors and underlying mechanism of halogen modification are still unclear. Herein, we systematically report the development of halogen (F, Cl and Br)-doped covalent triazine-based frameworks (CTFs) via a facile thermal treatment of CTFs and an excess of ammonium halide. The introduction of halogen atoms endowed CTFs with multiple superior effects such as improved optical absorption, promoted charge migration, narrowed band gaps and tuned band positions. The newly developed halogen-doped CTFs showed remarkable photocatalytic activities for H2 evolution under visible-light irradiation. Notably, the most enhanced photocatalytic performance was obtained with Cl-doped CTFs, which exhibited 7.1- and 2.4-fold enhancements compared to un-doped CTFs and Cl-doped g-C3N4, respectively. The electronegativity and atomic radius of the halogen atoms affected the modification of the optical and electronic properties, leading to different photocatalytic performances of F-, Cl- and Br-doped CTFs. The conclusions presented in this work will provide some new insights into the understanding of the doping effect for the improvement of the photocatalytic activity of halogen-doped CTF photocatalysts.

Visible-Light Driven Overall Conversion of CO2 and H2O to CH4 and O2 on 3D-SiC@2D-MoS2 Heterostructure.

A marigold-like SiC@MoS2 nanoflower with a unique Z-scheme structure efficiently achieves the overall conversion of gas phase CO2 with H2O (CO2 (g) + 2H2O (g) = CH4 + 2O2) without any sacrificial reagents under visible light (λ ≥ 420 nm) irradiation. The CH4 and O2 evolution are 323 and 621 µL·g-1·h-1, and stable throughout 5 cycle reactions of total 40 h. This work demonstrates a breakthrough in artificial photosynthesis with the Z-scheme 1D heterojunction constructed by combining 2D semiconductor and 3D semiconductor based on the transfer balance of photogenerated electron and hole.

Quaternary Layered Semiconductor Ba2Cr4GeSe10: Synthesis, Crystal Structure, and Thermoelectric Properties.

A quaternary narrow-band-gap semiconductor, Ba2Cr4GeSe10, has been discovered by solid-state reaction. It features a new structure type and crystallizes in the triclinic space group P1̅ (No. 2). The featured 2D anionic layers are constructed by condensed CrSe6 octahedra that are stacking along the c axis, with dispersed GeSe4 tetrahedra and located Ba2+ cations forming these layers. The energy-band structure shows a clear separation between the region of electronic conduction and the zone of electronic insulation. Significantly, an undoped Ba2Cr4GeSe10 sample shows a desirable low thermal conductivity κT (0.51-0.87 W/m·K) and a high Seebeck coefficient S (351-404 µV/K) and reaches a ZT ≈ 0.08 at 773 K.

Two new phases in the ternary RE-Ga-S systems with the unique interlinkage of GaS4 building units: synthesis, structure, and properties.

Two novel ternary rare-earth chalcogenides, Yb6Ga4S15 and Lu5GaS9, have been prepared by solid-state reactions of an elemental mixture at high temperatures. Their structures were determined on the basis of single-crystal X-ray diffraction. Yb6Ga4S15 crystallizes in the monoclinic space group C2/m (no.12) [a = 23.557(2) Å, b = 3.7664(4) Å, c = 12.466(1) Å, ß = 90.915(9)°, V = 1105.9(2) Å3 and Z = 2], whereas Lu5GaS9 crystallizes in the triclinic space group P1[combining macron] (no.2) [a = 7.735(3) Å, b = 10.033(4) Å, c = 10.120(4) Å, α = 106.296(4)°, ß = 100.178(5)°, γ = 101.946(3)°, V = 714.1(5) Å3 and Z = 2]. Both the structures feature complicated three dimensional frameworks with the unique interlinkages of GaS4 as basic building units. Significantly, photo-electrochemical measurements indicated that title compounds were photoresponsive under visible-light illumination. Furthermore, the UV-visible-near IR diffuse reflectance spectra, thermal stabilities, electronic structures, physical properties as well as a structure change trend of the ternary rare-earth/gallium/sulfur compounds have been evaluated.

Thickness-controlled electronic structure and thermoelectric performance of ultrathin SnS2 nanosheets.

The thermoelectric conversion efficiency of a material relies on a dimensionless parameter (ZT = S 2 σT/κ). It is a great challenge in enhancing the ZT value basically due to that the related transport factors of most of the bulk materials are inter-conditioned to each other, making it very difficult to simultaneously optimize these parameters. In this report, the negative correlation between power factor and thermal conductivity of nano-scaled SnS2 multilayers is predicted by high-level first-principle computations combined with Boltzmann transport theory. By diminishing the thickness of SnS2 nanosheet to about 3 L, the S and σ along a direction simultaneously increase whereas κ decreases, achieving a high ZT value of 1.87 at 800 K. The microscopic mechanisms for this unusual negative correlation in nano-scaled two dimensional (2D) material are elucidated and attributed to the quantum confinement effect. The results may open a way to explore the high ZT thermoelectric nano-devices for the practical thermoelectric applications.