Grignard reagents as deprotonation agents for oxazoline-amido-phenolate ligands: structural and catalytic implications with the role of halogen ions.

In this study, various halogen-substituted Grignard reagents were assessed as deprotonating agents for the oxazoline-amido-phenolate ligand, leading to the formation of magnesium complexes. The newly synthesized complexes with halogen substituents displayed three distinct coordinative modes, all extensively characterized through crystallographic methods. The introduction of halogen substituents induced changes in the Lewis acid properties of the complexes, thereby impacting their structural attributes and catalytic behavior during the initiation and propagation of ring polymerization of cyclic esters.

Comparison of the inoculum effect of in vitro antibacterial activity of Imipenem/relebactam and Ceftazidime/avibactam against ESBL-, KPC- and AmpC-producing Escherichia coli and Klebsiella pneumoniae.

OBJECTIVE: To evaluate effect of inoculum size of extended-spectrum ß-Lactamase (ESBL)-producing-, AmpC-producing-, and KPC-producing Escherichia coli and Klebsiella pneumoniae on the in vitro antibacterial effects of imipenem/relebactam (IMR) and ceftazidime/avibactam (CZA). METHODS: We compared the impact of inoculum size on IMR and CZA of sixteen clinical isolates and three standard isolates through antimicrobial susceptibility tests, time-kill assays and in vitro PK/PD studies. RESULTS: When inoculum size increased from 105 to 107 CFU/mL, an inoculum effect was observed for 26.3% (5/19) and 52.6% (10/19) of IMR and CZA, respectively; time-kill assays revealed that the concentration of CZA increased from ≥ 4 × MIC to 16 × MIC to reach 99.9% killing rate against K. pneumoniae ATCC-BAA 1705 (KPC-2-, OXA-9- and SHV-182-producing) and 60,700 (SHV-27- and DHA-1-producing). While for IMR, a concentration from 1 × MIC to 4 × MIC killed 99.9% of the four strains. When the inoculum size increased to 109 CFU/mL, neither IMR nor CZA showed a detectable antibacterial effect, even at a high concentration. An in vitro PK/PD study revealed a clear bactericidal effect when IMR administered as 1.25 g q6h when inoculum size increased. CONCLUSION: An inoculum effect on CZA was observed more frequent than that on IMR. Among the ß-lactamase-producing strains, the inoculum effect was most common for SHV-producing and KPC-producing strains.

Arginase from Priestia megaterium and the Effects of CMCS Conjugation on Its Enzymological Properties.

Arginase has shown promising potential in treating cancers by arginine deprivation therapy; however, low enzymatic activity and stability of arginase are impeding its development. This study was aimed to improve the enzymological properties of a marine bacterial arginase by carboxymethyl chitosan (CMCS) conjugation. An arginase producing marine bacterium Priestia megaterium strain P6 was isolated and identified. The novel arginase PMA from the strain was heterologously expressed, purified, and then conjugated to CMCS by ionic gelation with calcium chloride as the crosslinking agent. Enzymological properties of both PMA and CMCS-PMA conjugate were determined. The optimum temperature for PMA and CMCS-PMA at pH 7 were 60 °C and 55 °C, respectively. The optimum pH for PMA and CMCS-PMA at 37 °C were pH 10 and 9, respectively. CMCS-PMA showed higher thermostability than PMA over 55-70 °C and higher pH stability over pH 4-11 with the highest pH stability at pH 7. At 37 °C and pH of 7, i.e., around the human blood temperature and pH, CMCS-PMA was higher than the free PMA in enzymatic activity and stability by 24% and 21%, respectively. CMCS conjugation not only changed the optimum temperature, optimum pH, and enzymatic activity of PMA, but also improved its pH stability and temperature stability, and thus made it more favorable for medical application.

The deleterious effects of old social partners on Drosophila lifespan and stress resistance.

Social interactions play important roles in the modulation of behavior, physiology, and, potentially, lifespan. Although longevity has been studied extensively in different model organisms, due to the complexity of social environments, the social modulation of aging remains poorly investigated. The present study used the fruit fly, Drosophila melanogaster, as a model to study lifespan and stress resistance under different social conditions. Our experiments first showed that social isolation increased fly lifespan, suggesting a potential deleterious effect of social companions. Furthermore, we exposed flies to different aged social partners and found that living with old animals significantly reduced lifespan and stress resistance in young animals. In contrast, living with young animals increased old animal lifespan, although the effects were less robust. Overall, our results suggest that while social interaction can influence fly health, specific social partners may have more pronounced effects than others. This study provides new evidence that different social environments have significant impacts on animal physiology and longevity.

Unraveling the Correlation between Raman and Photoluminescence in Monolayer MoS2 through Machine-Learning Models.

2D transition metal dichalcogenides (TMDCs) with intense and tunable photoluminescence (PL) have opened up new opportunities for optoelectronic and photonic applications such as light-emitting diodes, photodetectors, and single-photon emitters. Among the standard characterization tools for 2D materials, Raman spectroscopy stands out as a fast and non-destructive technique capable of probing material's crystallinity and perturbations such as doping and strain. However, a comprehensive understanding of the correlation between photoluminescence and Raman spectra in monolayer MoS2 remains elusive due to its highly nonlinear nature. Here, the connections between PL signatures and Raman modes are systematically explored, providing comprehensive insights into the physical mechanisms correlating PL and Raman features. This study's analysis further disentangles the strain and doping contributions from the Raman spectra through machine-learning models. First, a dense convolutional network (DenseNet) to predict PL maps by spatial Raman maps is deployed. Moreover, a gradient boosted trees model (XGBoost) with Shapley additive explanation (SHAP) to bridge the impact of individual Raman features in PL features is applied. Last, a support vector machine (SVM) to project PL features on Raman frequencies is adopted. This work may serve as a methodology for applying machine learning to characterizations of 2D materials.

miR-335-5p regulates the proliferation, migration and phenotypic switching of vascular smooth muscle cells in aortic dissection by directly regulating SP1.

Uncontrolled proliferation, migration and phenotypic switching of vascular smooth muscle cells (VSMCs) are important steps in the development and progression of aortic dissection (AD). The function and potential mechanism of miR-335-5p in the pathogenesis of AD are explored in this study. Specifically, the biological function of miR-335-5p is explored in vitro through CCK-8, Transwell, immunofluorescence, EdU, wound-healing, RT-qPCR and western blotting assays. In addition, an AD model induced by angiotensin II is used to investigate the function of miR-335-5p in vivo. A dual-luciferase assay is performed to verify the targeting relationship between miR-335-5p and specificity protein 1 (SP1). Experiments involving the loss of SP1 function are performed to demonstrate the function of SP1 in the miR-335-5p-mediated regulation of human aortic-VSMCs (HA-VSMCs). AD tissues and platelet-derived growth factor BB (PDGF-BB)-stimulated HA-VSMCs show significant downregulation of miR-335-5p expression and upregulated SP1 expression. Overexpression of miR-335-5p effectively suppresses cell proliferation, migration and synthetic phenotype markers and enhances contractile phenotype markers induced by PDGF-BB treatment. Additionally, SP1 is identified as a target gene downstream of miR-335-5p, and its expression is negatively correlated with miR-335-5p in AD. Upregulation of SP1 partially reverses the inhibitory effect of miR-335-5p on HA-VSMCs, whereas the downregulation of SP1 has the opposite effect. Furthermore, Ad-miR-335-5p clearly suppresses aorta dilatation and vascular media degeneration in the AD model. Our results suggest that miR-335-5p inhibits HA-VSMC proliferation, migration and phenotypic switching by negatively regulating SP1, and indicate that miR-335-5p may be a potential therapeutic target in AD.

Diagnosis and treatment of congenital tricuspid valve malformation in a case of monozygotic twins.

BACKGROUND: Congenital tricuspid valve malformations are known to occur, but tricuspid valve malformations associated with twins are rarely reported. We report this case from the point of view of a medical history, an auxiliary examination and a genetic pathogenesis to provide a reference for our peers. CASE PRESENTATION: We report a rare case of congenital heart disease in monozygotic twins of Hui nationality in Yunnan-Guizhou Plateau, they are normal conception. Twin 1 had Ebstein's anomaly, and received surgical treatment and recovered satisfactorily. Twin 2 had only partial tricuspid septal prolapse, and pulmonary hypertension occurred during follow-up. CONCLUSIONS: It is necessary to carry out individualized diagnosis and treatment for twins and follow-up observation by echocardiography for a long time. Choosing the right time for cardiac surgery is of great significance to the treatment of the disease.

A Detailed Study to Discover the Trade between Left Atrial Blood Flow, Expression of Calcium-Activated Potassium Channels and Valvular Atrial Fibrillation.

Background: The present study aimed to explore the correlation between calcium-activated potassium channels, left atrial flow field mechanics, valvular atrial fibrillation (VAF), and thrombosis. The process of transforming mechanical signals into biological signals has been revealed, which offers new insights into the study of VAF. Methods: Computational fluid dynamics simulations use numeric analysis and algorithms to compute flow parameters, including turbulent shear stress (TSS) and wall pressure in the left atrium (LA). Real-time PCR and western blotting were used to detect the mRNA and protein expression of IKCa2.3/3.1, ATK1, and P300 in the left atrial tissue of 90 patients. Results: In the valvular disease group, the TSS and wall ressure in the LA increased, the wall pressure increased in turn in all disease groups, mainly near the mitral valve and the posterior portion of the LA, the increase in TSS was the most significant in each group near the mitral valve, and the middle and lower part of the back of the LA and the mRNA expression and protein expression levels of IKCa2.3/3.1, AKT1, and P300 increased (p < 0.05) (n = 15). The present study was preliminarily conducted to elucidate whether there might be a certain correlation between IKCa2.3 and LA hemodynamic changes. Conclusions: The TSS and wall pressure changes in the LA are correlated with the upregulation of mRNA and protein expression of IKCa2.3/3.1, AKT1, and P300.

Soft-lock drawing of super-aligned carbon nanotube bundles for nanometre electrical contacts.

The assembly of single-walled carbon nanotubes (CNTs) into high-density horizontal arrays is strongly desired for practical applications, but challenges remain despite myriads of research efforts. Herein, we developed a non-destructive soft-lock drawing method to achieve ultraclean single-walled CNT arrays with a very high degree of alignment (angle standard deviation of ~0.03°). These arrays contained a large portion of nanometre-sized CNT bundles, yielding a high packing density (~400 µm-1) and high current carrying capacity (∼1.8 × 108 A cm-2). This alignment strategy can be generally extended to diverse substrates or sources of raw single-walled CNTs. Significantly, the assembled CNT bundles were used as nanometre electrical contacts of high-density monolayer molybdenum disulfide (MoS2) transistors, exhibiting high current density (~38 µA µm-1), low contact resistance (~1.6 kΩ µm), excellent device-to-device uniformity and highly reduced device areas (0.06 µm2 per device), demonstrating their potential for future electronic devices and advanced integration technologies.

Synthesis of High-Performance Monolayer Molybdenum Disulfide at Low Temperature.

The large-area synthesis of high-quality MoS2 plays an important role in realizing industrial applications of optoelectronics, nanoelectronics, and flexible devices. However, current techniques for chemical vapor deposition (CVD)-grown MoS2 require a high synthetic temperature and a transfer process, which limits its utilization in device fabrications. Here, the direct synthesis of high-quality monolayer MoS2 with the domain size up to 120 µm by metal-organic CVD (MOCVD) at a temperature of 320 °C is reported. Owing to the low-substrate temperature, the MOCVD-grown MoS2 exhibits low impurity doping and nearly unstrained properties on the growth substrate, demonstrating enhanced electronic performance with high electron mobility of 68.3 cm2 V-1 s-1 at room temperature. In addition, by tuning the precursor ratio, a better understanding of the MoS2 growth process via a geometric model of the MoS2 flake shape, is developed, which can provide further guidance for the synthesis of 2D materials.

Designing artificial two-dimensional landscapes via atomic-layer substitution.

Technology advancements in history have often been propelled by material innovations. In recent years, two-dimensional (2D) materials have attracted substantial interest as an ideal platform to construct atomic-level material architectures. In this work, we design a reaction pathway steered in a very different energy landscape, in contrast to typical thermal chemical vapor deposition method in high temperature, to enable room-temperature atomic-layer substitution (RT-ALS). First-principle calculations elucidate how the RT-ALS process is overall exothermic in energy and only has a small reaction barrier, facilitating the reaction to occur at room temperature. As a result, a variety of Janus monolayer transition metal dichalcogenides with vertical dipole could be universally realized. In particular, the RT-ALS strategy can be combined with lithography and flip-transfer to enable programmable in-plane multiheterostructures with different out-of-plane crystal symmetry and electric polarization. Various characterizations have confirmed the fidelity of the precise single atomic layer conversion. Our approach for designing an artificial 2D landscape at selective locations of a single layer of atoms can lead to unique electronic, photonic, and mechanical properties previously not found in nature. This opens a new paradigm for future material design, enabling structures and properties for unexplored territories.

Ultralow contact resistance between semimetal and monolayer semiconductors.

Advanced beyond-silicon electronic technology requires both channel materials and also ultralow-resistance contacts to be discovered1,2. Atomically thin two-dimensional semiconductors have great potential for realizing high-performance electronic devices1,3. However, owing to metal-induced gap states (MIGS)4-7, energy barriers at the metal-semiconductor interface-which fundamentally lead to high contact resistance and poor current-delivery capability-have constrained the improvement of two-dimensional semiconductor transistors so far2,8,9. Here we report ohmic contact between semimetallic bismuth and semiconducting monolayer transition metal dichalcogenides (TMDs) where the MIGS are sufficiently suppressed and degenerate states in the TMD are spontaneously formed in contact with bismuth. Through this approach, we achieve zero Schottky barrier height, a contact resistance of 123 ohm micrometres and an on-state current density of 1,135 microamps per micrometre on monolayer MoS2; these two values are, to the best of our knowledge, the lowest and highest yet recorded, respectively. We also demonstrate that excellent ohmic contacts can be formed on various monolayer semiconductors, including MoS2, WS2 and WSe2. Our reported contact resistances are a substantial improvement for two-dimensional semiconductors, and approach the quantum limit. This technology unveils the potential of high-performance monolayer transistors that are on par with state-of-the-art three-dimensional semiconductors, enabling further device downscaling and extending Moore's law.

Finite element and biomechanical analysis of risk factors for implant failure during tension band plating.

OBJECTIVE: Tension band plating has recently gained widespread acceptance as a method of correcting angular limb deformities in skeletally immature patients. We examined the role of biomechanics in procedural failure and devised a new method of reducing the rate of implant failure. METHODS: In the biomechanical model, afterload (static or cyclic) was applied to each specimen. The residual stress of the screw combined with different screw sizes and configurations were measured and compared by X-ray diffraction. With regard to static load and similar conditions, the stress distribution was analyzed according to a three-dimensional finite element model. RESULTS: The residual stress was close to zero in the static tension group, whereas it was very high in the cyclic load group. The residual stress of screws was significantly lower in the convergent group and parallel group than in the divergent group. The finite element model showed similar results. CONCLUSIONS: In both the finite element analysis and biomechanical tests, the maximum stress of the screw was concentrated at the position where the screws enter the cortex. Cyclic loading is the primary cause of implant failure.

Characterization of highly virulent community-associated methicillin-resistant Staphylococcus aureus ST9-SCCmec XII causing bloodstream infection in China.

Previous studies have shown that livestock (LA)-MRSA ST398 evolved from a human-adapted methicillin-susceptible S. aureus (MSSA) clone. However, detailed information regarding ST9 is still unclear. Here, we characterized a community-associated methicillin-resistant Staphylococcus aureus (CA-MRSA) ST9-SCCmec XII isolate that has not been previously reported to cause serious disease in China. We obtained whole-genome sequences of one ST9-t899-XII isolate-ZY462471-from a patient with bloodstream infection without livestock contact. The antibiotic susceptibilities of ZY462471 were determined and the clinical information was extracted from medical notes and compared with twenty-seven previously sequenced genomes. Phylogenetic reconstruction was performed to investigate the probable host evolutionary origins of ZY462471, and the difference in resistome and virulence factors were investigated. Virulence assay was performed to evaluate the high virulence potential of ZY462471 and compare the virulence between the closest ST9 MSSA neighbours. Clinical data suggested that ZY462471 is a CA-MRSA. Phylogenetic analysis showed a much closer relationship of ZY462471 with human-associated MSSA ST9 isolates than other LA-MRSA ST9 isolates, suggesting that ZY462471 probably evolved from ST9 MSSA predecessors by acquiring an SCCmec cassette. Importantly, virulence assays indicated that ZY462471 was highly virulent and compared with the MSSA ST9 predecessors, ZY462471 did not show attenuated virulence. Finally, we found that ZY462471 harboured an immune evasion cluster (IEC)-carrying ßC-Φ, which is typically found in human clinical S. aureus rather than LA-MRSA isolates, suggesting that ZY4762471 obtained the IEC-carrying ßC-Φs from human clinical S. aureus strains. Considering its high virulence potential, this strain should be monitored to prevent more widespread dissemination.

Room Temperature Terahertz Electroabsorption Modulation by Excitons in Monolayer Transition Metal Dichalcogenides.

The interaction between off-resonant laser pulses and excitons in monolayer transition metal dichalcogenides is attracting increasing interest as a route for the valley-selective coherent control of the exciton properties. Here, we extend the classification of the known off-resonant phenomena by unveiling the impact of a strong THz field on the excitonic resonances of monolayer MoS2. We observe that the THz pump pulse causes a selective modification of the coherence lifetime of the excitons, while keeping their oscillator strength and peak energy unchanged. We rationalize these results theoretically by invoking a hitherto unobserved manifestation of the Franz-Keldysh effect on an exciton resonance. As the modulation depth of the optical absorption reaches values as large as 0.05 dB/nm at room temperature, our findings open the way to the use of semiconducting transition metal dichalcogenides as compact and efficient platforms for high-speed electroabsorption devices.

Asymmetric hot-carrier thermalization and broadband photoresponse in graphene-2D semiconductor lateral heterojunctions.

The massless Dirac electron transport in graphene has led to a variety of unique light-matter interaction phenomena, which promise many novel optoelectronic applications. Most of the effects are only accessible by breaking the spatial symmetry, through introducing edges, p-n junctions, or heterogeneous interfaces. The recent development of direct synthesis of lateral heterostructures offers new opportunities to achieve the desired asymmetry. As a proof of concept, we study the photothermoelectric effect in an asymmetric lateral heterojunction between the Dirac semimetallic monolayer graphene and the parabolic semiconducting monolayer MoS2. Very different hot-carrier cooling mechanisms on the graphene and the MoS2 sides allow us to resolve the asymmetric thermalization pathways of photoinduced hot carriers spatially with electrostatic gate tunability. We also demonstrate the potential of graphene-2D semiconductor lateral heterojunctions as broadband infrared photodetectors. The proposed structure shows an extreme in-plane asymmetry and provides a new platform to study light-matter interactions in low-dimensional systems.

Paraffin-enabled graphene transfer.

The performance and reliability of large-area graphene grown by chemical vapor deposition are often limited by the presence of wrinkles and the transfer-process-induced polymer residue. Here, we report a transfer approach using paraffin as a support layer, whose thermal properties, low chemical reactivity and non-covalent affinity to graphene enable transfer of wrinkle-reduced and clean large-area graphene. The paraffin-transferred graphene has smooth morphology and high electrical reliability with uniform sheet resistance with ~1% deviation over a centimeter-scale area. Electronic devices fabricated on such smooth graphene exhibit electrical performance approaching that of intrinsic graphene with small Dirac points and high carrier mobility (hole mobility = 14,215 cm2 V-1 s-1; electron mobility = 7438 cm2 V-1 s-1), without the need of further annealing treatment. The paraffin-enabled transfer process could open realms for the development of high-performance ubiquitous electronics based on large-area two-dimensional materials.

Additive manufacturing of patterned 2D semiconductor through recyclable masked growth.

The 2D van der Waals crystals have shown great promise as potential future electronic materials due to their atomically thin and smooth nature, highly tailorable electronic structure, and mass production compatibility through chemical synthesis. Electronic devices, such as field effect transistors (FETs), from these materials require patterning and fabrication into desired structures. Specifically, the scale up and future development of "2D"-based electronics will inevitably require large numbers of fabrication steps in the patterning of 2D semiconductors, such as transition metal dichalcogenides (TMDs). This is currently carried out via multiple steps of lithography, etching, and transfer. As 2D devices become more complex (e.g., numerous 2D materials, more layers, specific shapes, etc.), the patterning steps can become economically costly and time consuming. Here, we developed a method to directly synthesize a 2D semiconductor, monolayer molybdenum disulfide (MoS2), in arbitrary patterns on insulating SiO2/Si via seed-promoted chemical vapor deposition (CVD) and substrate engineering. This method shows the potential of using the prepatterned substrates as a master template for the repeated growth of monolayer MoS2 patterns. Our technique currently produces arbitrary monolayer MoS2 patterns at a spatial resolution of 2 µm with excellent homogeneity and transistor performance (room temperature electron mobility of 30 cm2 V-1 s-1 and on-off current ratio of 107). Extending this patterning method to other 2D materials can provide a facile method for the repeatable direct synthesis of 2D materials for future electronics and optoelectronics.

Two-dimensional MoS2-enabled flexible rectenna for Wi-Fi-band wireless energy harvesting.

The mechanical and electronic properties of two-dimensional materials make them promising for use in flexible electronics1-3. Their atomic thickness and large-scale synthesis capability could enable the development of 'smart skin'1,3-5, which could transform ordinary objects into an intelligent distributed sensor network6. However, although many important components of such a distributed electronic system have already been demonstrated (for example, transistors, sensors and memory devices based on two-dimensional materials1,2,4,7), an efficient, flexible and always-on energy-harvesting solution, which is indispensable for self-powered systems, is still missing. Electromagnetic radiation from Wi-Fi systems operating at 2.4 and 5.9 gigahertz8 is becoming increasingly ubiquitous and would be ideal to harvest for powering future distributed electronics. However, the high frequencies used for Wi-Fi communications have remained elusive to radiofrequency harvesters (that is, rectennas) made of flexible semiconductors owing to their limited transport properties9-12. Here we demonstrate an atomically thin and flexible rectenna based on a MoS2 semiconducting-metallic-phase heterojunction with a cutoff frequency of 10 gigahertz, which represents an improvement in speed of roughly one order of magnitude compared with current state-of-the-art flexible rectifiers9-12. This flexible MoS2-based rectifier operates up to the X-band8 (8 to 12 gigahertz) and covers most of the unlicensed industrial, scientific and medical radio band, including the Wi-Fi channels. By integrating the ultrafast MoS2 rectifier with a flexible Wi-Fi-band antenna, we fabricate a fully flexible and integrated rectenna that achieves wireless energy harvesting of electromagnetic radiation in the Wi-Fi band with zero external bias (battery-free). Moreover, our MoS2 rectifier acts as a flexible mixer, realizing frequency conversion beyond 10 gigahertz. This work provides a universal energy-harvesting building block that can be integrated with various flexible electronic systems.