Polarization sensitive optical side leakage radiometry for distributed characterization of anti-resonant hollow-core fibers.

A novel technique referred to as optical side leakage radiometry is proposed and experimentally demonstrated for non-destructive and distributed characterization of anti-resonant hollow-core optical fibers with high spatial resolution. Through in-depth analysis of the leakage light collection, we discover a unique polarization dependence, which is validated by our experiment. By leveraging this effect and employing Fourier filtering, this method enables accurate quantification of propagation attenuations for fundamental and higher order modes (with the uncertainty of <1 dB/km), identification of localized defects (with the resolution of ∼5 cm), and measurement of ultra-low spectral phase birefringence (at the level of 10-7) in two in-house-fabricated nested antiresonant nodeless hollow-core fibers. Such a fiber characterization approach, boasting unprecedently high accuracy and a potentially wide dynamic range, holds the potential to become an indispensable diagnosis tool for monitoring and assisting the manufacture of high-quality anti-resonant hollow-core fiber.

Selectively gas-filled anti-resonant hollow-core fibers for broadband high-purity LP11 mode guidance.

An anti-resonant hollow-core fiber capable of propagating the LP11 mode with high purity and over a wide wavelength range is proposed and demonstrated. The suppression of the fundamental mode relies on the resonant coupling with specific gas selectively filled into the cladding tubes. After a length of 2.7 m, the fabricated fiber shows a mode extinction ratio of over 40 dB at 1550 nm and above 30 dB in a wavelength range of 150 nm. The loss of the LP11 mode is measured to be 2.46 dB/m at 1550 nm. We discuss the potential application of such fibers in high-fidelity high-dimensional quantum state transmission.

Accurate modeling and measurement of pressure-induced group velocity dispersion variations in anti-resonant hollow-core fibers.

Precise control of group velocity dispersion (GVD) by pressure in a gas-filled hollow-core fiber (HCF) is of essential importance for many gas-based nonlinear optical applications. To accurately calculate the pressure-induced dispersion variations (∂ß2/∂p) in anti-resonant types of HCF, an analytical model combining the contribution of the gas material, capillary waveguide, and cladding resonances is developed, with an insightful physical picture. Broadband (∼1000 nm) GVD measurements in a single-shot manner realize accuracy and precision as low as 0.1 ps2/km and 2 × 10-3 ps2/km, respectively, and validate our model. Consistent with our model, a pronounced negative ∂ß2/∂p is observed experimentally for the first time, to our knowledge. Our model can also be extended to other HCFs with cladding resonances in predicting ∂ß2/∂p, such as in photonic bandgap types of HCF.

Birefringent, low loss, and broadband semi-tube anti-resonant hollow-core fiber.

We report on the design, fabrication, and characterization of a low-loss birefringent semi-tube anti-resonant hollow-core fiber (AR-HCF). By optimizing the structure design and the stack-and-draw fabrication technique, a transmission loss of 4.8 dB/km at 1522 nm, a <10 dB/km bandwidth of 154 nm, and a phase birefringence of 1.8 × 10-5 are demonstrated. This achieved loss is more than one order of magnitude lower than the previously reported birefringent AR-HCF and the bandwidth is one order of magnitude broader than the reported birefringent photonic bandgap hollow-core fiber (PBG-HCF) with the same loss level. The polarization extinction ratio (PER) reaches the ∼20 dB level in a 90 m-long fiber under >25 cm bending radius. Combined with the single mode and low dispersion features, the developed semi-tube AR-HCF may find a variety of applications in frequency metrology, interferometric fiber gyroscopes, and long-baseline stellar interferometry.

Air flowing induced thermo-optic effect for thermal sensitivity reduction in anti-resonant hollow core fibers.

The signal propagation delay through an optical fiber changes with environmental temperature, imposing a fundamental limit on performances in many fiber-optic applications. It has been shown that the thermal coefficient of delay (TCD) in hollow core fibers (HCFs) can be 20 times lower than in standard single-mode fibers (SSMFs). To further reduce TCD over a broad wavelength range at room temperature, so that to enrich fiber-optic applications in time- synchronization scenarios, the thermal expansion effect of silica glass must be compensated for. Exploiting the thermo-optic effect of air inside an anti-resonant hollow core fiber (ARF) can be a feasible solution. Nevertheless, an accurate description of the air flow in the course of temperature variation is highly needed to predict the influence of this effect. This work develops an analytical model for quantitatively calculating this temperature-induced air-flowing effect. Across a range of parameters of core diameter, fiber length, and temperature change rate, the experimentally measured propagation delay changes agree well with our model. The resultant low thermal sensitivity is also validated in non-steady conditions and in a practically usable SSMF-ARF-SSMF chain. Our model indicates that a >40-fold TCD reduction relative to SSMFs can be realized in a 60-m-long, 50-µm-diameter ARF, and further TCD reduction should be possible by properly engineering the gas type and the ambient pressure.

High extinction ratio and low backreflection polarization maintaining hollow-core to solid-core fiber interconnection.

We develop a hybrid cold/heat two-step splicing approach for low loss, low backreflection, and high polarization extinction ratio (PER) hollow-core to solid-core fiber interconnection. The employed hollow-core fiber (HCF) is our recently developed high-birefringence polarization-maintaining hollow-core fiber (PM-HCF) with a PER value of ∼30 dB, and the solid-core fiber (SCF) is a commercial Panda polarization-maintaining fiber (Panda fiber). Simultaneous low backreflection (<-35 dB), low insertion loss (IL) (∼0.7 dB), and high PER (∼27 dB) are achieved, representing the first high-performance PM-HCF/SCF interconnections, to the best of our knowledge. This greatly facilitates the applications of PM-HCF in widespread fields such as precise metrologies, gyroscopes, and ultrafast/high-power laser deliveries.