Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 9 de 9
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Express ; 32(11): 19467-19479, 2024 May 20.
Article in English | MEDLINE | ID: mdl-38859081

ABSTRACT

Computational micro-spectrometers comprised of detector arrays and encoding structure arrays, such as on-chip Fabry-Perot (FP) cavity filters, have great potential in many in-situ applications owing to their compact size and snapshot imaging ability. Given manufacturing deviation and environmental influence are inevitable, easy and effective calibration for spectrometer is necessary, especially for in-situ applications. Currently calibration strategies based on iterative algorithms or neural networks require accurate measurements of pixel-level (spectral) encoding functions through monochromator or large amounts of standard samples. These procedures are time-consuming and expensive, thereby impeding in-situ applications. Meta-learning algorithms with few-shot learning ability can address this challenge by incorporating the prior knowledge in the simulated dataset. In this work, we propose a meta-learning algorithm free of measuring encoding function or large amounts of standard samples to calibrate a micro-spectrometer with manufacturing deviation effectively. Our micro-spectrometer comprises 16 types of FP filters covering a wavelength range of 550-720 nm. The center wavelength of each filter type deviates from the design up to 6 nm. After calibration with 15 different color data, the average reconstruction error on the test dataset decreased from 7.2 × 10-3 to 1.2 × 10-3, and further decreased to 9.4 × 10-4 when the calibration data increased to 24. The performance is comparable to algorithms trained with measured encoding function both in reconstruction error and generalization ability. We estimated that the cost of in-situ calibration through reflectance measurements of color chart decreased to one percent of the cost through monochromator measurements. By exploiting prior deviation information in simulation data with meta-learning, the efficiency and cost of calibration are significantly improved, thereby facilitating the large-scale production and in-situ application of micro-spectrometers.

2.
Science ; 383(6688): 1198-1204, 2024 Mar 15.
Article in English | MEDLINE | ID: mdl-38484055

ABSTRACT

Printable mesoscopic perovskite solar cells (p-MPSCs) do not require the added hole-transport layer needed in traditional p-n junctions but have also exhibited lower power conversion efficiencies of about 19%. We performed device simulation and carrier dynamics analysis to design a p-MPSC with mesoporous layers of semiconducting titanium dioxide, insulating zirconium dioxide, and conducting carbon infiltrated with perovskite that enabled three-dimensional injection of photoexcited electrons into titanium dioxide for collection at a transparent conductor layer. Holes underwent long-distance diffusion toward the carbon back electrode, and this carrier separation reduced recombination at the back contact. Nonradiative recombination at the bulk titanium dioxide/perovskite interface was reduced by ammonium phosphate modification. The resulting p-MPSCs achieved a power conversion efficiency of 22.2% and maintained 97% of their initial efficiency after 750 hours of maximum power point tracking at 55 ± 5°C.

3.
Fundam Res ; 2(2): 276-283, 2022 Mar.
Article in English | MEDLINE | ID: mdl-38933159

ABSTRACT

Highly crystalline perovskite films with large grains and few grain boundaries are conducive for efficient and stable perovskite solar cells. Current methods for preparing perovskite films are mostly based on a fast crystallization process, with rapid nucleation and insufficient growth. In this study, MAPbI3 perovskite with inhibited nucleation and promoted growth in the TiO2/ZrO2/carbon triple mesoscopic scaffold was crystallized by modulating the precursor and the crystallization process. N-methylformamide showed high solubility for both methylammonium iodide and PbI2 and hampered the formation of large colloids in the MAPbI3 precursor solution. Furthermore, methylammonium chloride was added to reduce large colloids, which are a possible source of nucleation sites. During the crystallization of MAPbI3, the solvent was removed at a slow controlled speed, to avoid rapid nucleation and provide sufficient time for crystal growth. As a result, highly oriented MAPbI3 crystals with suppressed non-radiative recombination and promoted charge transport were obtained in the triple mesoscopic layer with disordered pores. The corresponding hole-conductor-free, printable mesoscopic perovskite solar cells exhibited a highest power conversion efficiency of 18.82%. The device also exhibited promising long-term operational stability of 1000 h under continuous illumination at maximum power point at 55 ± 5 °C and damp-heat stability of 1340 h aging at 85 °C as well as 85% relative humidity.

4.
Front Optoelectron ; 13(3): 256-264, 2020 Sep.
Article in English | MEDLINE | ID: mdl-36641571

ABSTRACT

Over the last decade, the power conversion efficiency of hybrid organic-inorganic perovskite solar cells (PSCs) has increased dramatically from 3.8% to 25.2%. This rapid progress has been possible due to the accurate control of the morphology and crystallinity of solution-processed perovskites, which are significantly affected by the concentration of the precursor used. This study explores the influence of precursor concentrations on the performance of printable hole-conductor-free mesoscopic PSCs via a simple one-step drop-coating method. The results reveal that lower concentrations lead to larger grains with inferior pore filling, while higher concentrations result in smaller grains with improved pore filling. Among concentrations ranging from 0.24-1.20 M1), devices based on a moderate strength of 0.70 M were confirmed to exhibit the best efficiency at 16.32%.

5.
J Phys Chem Lett ; 10(21): 6865-6872, 2019 Nov 07.
Article in English | MEDLINE | ID: mdl-31599595

ABSTRACT

Solution-processable organic-inorganic perovskite solar cells have attracted much attention in the past few years. Energy level alignment is of great importance for improving the performance of perovskite solar cells because it strongly influences charge separation and recombination. In this report, we introduce three amide additives, namely, formamide, acetamide, and urea, into the MAPbI3 perovskite by mixing them directly in perovskite precursor solutions. The Fermi level of MAPbI3 shifts from -4.36 eV to -4.63, -4.65, and -4.61 eV, respectively, upon addition of these additives. The charge transfer between perovskite and mp-TiO2 is found to be promoted as determined via TRPL spectra, and recombination in the perovskite is suppressed. As a result, the built-in electric field (Vbi) of the printable, hole-conductor-free mesoscopic perovskite solar cells based on these perovskites with amide additives is enhanced and a peak power conversion efficiency of 15.57% is obtained.

6.
ACS Appl Mater Interfaces ; 10(13): 10835-10841, 2018 Apr 04.
Article in English | MEDLINE | ID: mdl-29558106

ABSTRACT

Printable mesoscopic perovskite solar cells (PMPSCs) have exhibited great attractive prospects in the energy conversion field due to their high stability and potential scalability. However, the thick perovskite film in the mesoporous layers challenges the charge transportation and increase grain boundary defects, limiting the performance of the PMPSCs. It is critical not only to improve the electric property of the perovskite film but also to passivate the charge traps to improve the device performance. Herein we synthesized a bis-adduct 2,5-(dimethyl ester) C60 fulleropyrrolidine (bis-DMEC60) via a rational molecular design and incorporated it into the PMPSCs. The enhanced chemical interactions between perovskite and bis-DMEC60 improve the conductivity of the perovskite film as well as elevate the passivation effect of bis-DMEC60 at the grain boundaries. As a result, the fill factor (FF) and power conversion efficiency (PCE) of the PMPSCs containing bis-DMEC60 reached 0.71 and 15.21%, respectively, significantly superior to the analogous monoadduct derivative (DMEC60)-containing and control devices. This work suggests that fullerene derivatives with multifunctional groups are promising for achieving high-performance PMPSCs.

7.
ACS Appl Mater Interfaces ; 9(37): 31721-31727, 2017 Sep 20.
Article in English | MEDLINE | ID: mdl-28837311

ABSTRACT

Work function of carbon electrodes is critical in obtaining high open-circuit voltage as well as high device performance for carbon-based perovskite solar cells. Herein, we propose a novel strategy to upshift work function of carbon electrode by incorporating boron atom into graphite lattice and employ it in printable hole-conductor-free mesoscopic perovskite solar cells. The high-work-function boron-doped carbon electrode facilitates hole extraction from perovskite as verified by photoluminescence. Meanwhile, the carbon electrode is endowed with an improved conductivity because of a higher graphitization carbon of boron-doped graphite. These advantages of the boron-doped carbon electrode result in a low charge transfer resistance at carbon/perovskite interface and an extended carrier recombination lifetime. Together with the merit of both high work function and conductivity, the power conversion efficiency of hole-conductor-free mesoscopic perovskite solar cells is increased from 12.4% for the pristine graphite electrode-based cells to 13.6% for the boron-doped graphite electrode-based cells with an enhanced open-circuit voltage and fill factor.

8.
J Phys Chem Lett ; 8(8): 1804-1809, 2017 Apr 20.
Article in English | MEDLINE | ID: mdl-28387118

ABSTRACT

Lead halide perovskite solar cells have recently emerged as a very promising photovoltaic technology due to their excellent power conversion efficiencies; however, the toxicity of lead and the poor stability of perovskite materials remain two main challenges that need to be addressed. Here, for the first time, we report a lead-free, highly stable C6H4NH2CuBr2I compound. The C6H4NH2CuBr2I films exhibit extraordinary hydrophobic behavior with a contact angle of ∼90°, and their X-ray diffraction patterns remain unchanged even after 4 h of water immersion. UV/vis absorption spectrum shows that C6H4NH2CuBr2I compound has an excellent optical absorption over the entire visible spectrum. We applied this copper-based light absorber in printable mesoscopic solar cell for the initial trial and achieved a power conversion efficiency of ∼0.5%. Our study represents an alternative pathway to develop low-toxic and highly stable organic-inorganic hybrid materials for photovoltaic application.

9.
J Am Chem Soc ; 137(5): 1790-3, 2015 Feb 11.
Article in English | MEDLINE | ID: mdl-25594109

ABSTRACT

By the introduction of an organic silane self-assembled monolayer, an interface-engineering approach is demonstrated for hole-conductor-free, fully printable mesoscopic perovskite solar cells based on a carbon counter electrode. The self-assembled silane monolayer is incorporated between the TiO2 and CH3NH3PbI3, resulting in optimized interface band alignments and enhanced charge lifetime. The average power conversion efficiency is improved from 9.6% to 11.7%, with a highest efficiency of 12.7%, for this low-cost perovskite solar cell.

SELECTION OF CITATIONS
SEARCH DETAIL
...