Green, Validated HPLC Method Coupled With Fluorescence Detection for the Analysis of Tafluprost in its Pure Form and Ophthalmic Formulation: Application to Aqueous Humor and Content Uniformity Testing.

A green, simple and sensitive HPLC method coupled with fluorescence detection was implemented for the quantitative determination of the anti-glaucoma drug tafluprost (TFL). Liquid chromatography was performed on HyperClone™ ODS (C18) column of dimensions; 150 × 4.6 mm i.d. and 5 µm particle size using a green eluent; ethanol:0.01 M phosphate buffer (60:40 v/v, pH 4.5) delivered at 1 mL min-1. Fluorescence detection was accomplished at 220 nm (excitation) and 292 nm (emission). Bimatoprost (BIM) was used as an internal standard (I.S.). In this method, TFL was eluted after 6.70 minutes. The method satisfied International Council for Harmonization (ICH) validation guidelines, as proved by good linearity (r = 0.9999, over the range 0.05-2 µg mL-1), accuracy (recovery average 100.13 ± 1.27%), precision, robustness and specificity. The limit of detection and limit of quantification were found to be 0.016 and 0.048 µg mL-1, respectively. The proposed method has been successfully applied for the estimation of TFL in eye drops and aqueous humor. For the first time, the approach was applied with acceptable results for the evaluation of the uniformity of TFL eye drops content. Furthermore, Green Analytical Procedure Index (GAPI) and analytical Eco-scale were used to prove that the proposed HPLC method is environmentally friendly.

Factorial design-assisted reverse phase HPLC-UV approach for the concurrent estimation of cetirizine and azelastine in aqueous humor.

A new analytical quality by design-assisted HPLC-UV approach is presented, for the first time, for the concurrent determination of cetirizine (CTZ) and azelastine (AZE) in raw materials, commercial eye drops and aqueous humor. The two drugs are co-administered as eye drops in severe ocular allergies. A 23 full factorial design was adopted for the chromatographic optimization to ensure the best analytical performance and reliability, as well as to save time, effort and solvent consumption. The parameters, including pH, acetonitrile ratio, and flow rate, were selected as independent factors. The responses analyzed were resolution and tailing of peaks. The separation was achieved through isocratic elution on C8 column with mobile phase made up of acetonitrile: 0.3% triethylamine of pH 5 (60:40 v/v) at a flow rate of 1.2 mL min-1 and detection at 216 nm. The elution time was less than 6 min. The approach was fully validated in accordance with International Council for Harmonization (ICH) guidelines. Good linearity was achieved over the concentration ranges of 1.0-30 and 0.5-10 µg mL-1 with limits of detection of 0.310 and 0.158 µg mL-1 and limits of quantification of 0.940 and 0.479 µg mL-1 for CTZ and AZE, respectively, with correlation coefficients of 0.9998. The intra- and inter-day precisions were lower than 2%. The good sensitivity of the approach permits the analysis of CTZ and AZE in spiked aqueous humor with mean percentage recoveries of 100.93 ± 1.42 and 100.11 ± 1.55, respectively. The statistical comparison between results of the developed method and the comparison method revealed no differences, indicating the accuracy of the method.

Green HPLC method with time programming for the determination of the co-formulated eye drops of tafluprost and timolol in their challengeable ratio.

A new, simple and selective HPLC method was implemented for the simultaneous estimation of tafluprost (TFL) and timolol (TIM) in their new anti-glaucoma combination in the challengeable ratio of 3 and 1000 for TFL and TIM, respectively. Separation was achieved using a BDS Hypersil phenyl column and a mobile phase made up of acetonitrile: 0.015 M phosphate buffer (50:50 v/v, pH 3.5) delivered at 1 mL min-1 and the separation was completed in less than 6 min. UV detection was time programmed at 220 nm for the first 4.5 min and later at 254 nm. Mebeverine (MEB) was used as an internal standard (I.S.). The linearity was observed in the ranges of 0.6-45 and 50-2000 µg mL-1 with limits of detection (LOD) of 0.18, 16.48 µg mL-1 and limits of quantification (LOQ) of 0.55, 49.94 µg mL-1 for TFL and TIM, respectively. The method satisfied International Council for Harmonization (ICH) validation guidelines. The study was extended to the estimation of the studied drugs in their co-formulated eye drops as well as in their single dosage forms with acceptable percentage recoveries. Moreover, Green Analytical Procedure Index (GAPI) and analytical Eco-scale were investigated to confirm the greenness of the proposed HPLC method.

Derivative spectrophotometric analysis of benzophenone (as an impurity) in phenytoin.

Three simple and rapid spectrophotometric methods were developed for detection and trace determination of benzophenone (the main impurity) in phenytoin bulk powder and pharmaceutical formulations. The first method, zero-crossing first derivative spectrophotometry, depends on measuring the first derivative trough values at 257.6 nm for benzophenone. The second method, zero-crossing third derivative spectrophotometry, depends on measuring the third derivative peak values at 263.2 nm. The third method, ratio first derivative spectrophotometry, depends on measuring the peak amplitudes of the first derivative of the ratio spectra (the spectra of benzophenone divided by the spectrum of 5.0 µg/mL phenytoin solution) at 272 nm. The calibration graphs were linear over the range of 1-10 µg/mL. The detection limits of the first and the third derivative methods were found to be 0.04 µg/mL and 0.11 µg/mL and the quantitation limits were 0.13 µg/mL and 0.34 µg/mL, respectively, while for the ratio derivative method, the detection limit was 0.06 µg/mL and the quantitation limit was 0.18 µg/mL. The proposed methods were applied successfully to the assay of the studied drug in phenytoin bulk powder and certain pharmaceutical preparations. The results were statistically compared to those obtained using a polarographic method and were found to be in good agreement.

Spectrophotometric determination of acyclovir and ribavirin in their dosage forms.

Two simple, accurate, and reliable spectrophotometric methods have been developed for the determination of 2 antiviral drugs, acyclovir (ACV) and ribavirin (RBV), in their pharmaceutical formulations. These methods are based on oxidation of the 2 drugs with either cerium (IV) ammonium sulfate (Method A) or potassium persulfate (Method B). The products of oxidation in both methods are coupled with 3-methylbenzothiazolin 2-one hydrazone, producing a deep blue color with a maximum absorption wavelength at 630 nm. In Method A, the absorbance-concentration plots were linear over the ranges of 5-50 and 10-60 microg/mL with detection limits of 0.18 microg/mL (8 x 10(-7) M) and 0.63 microg/mL (2.58 x 10(-6) M) for ACV and RBV, respectively. In Method B, the ranges were 5-45 and 20-50 microg/mL with detection limits of 0.11 microg/mL (4.88 x 10(-7) M) and 1.40 microg/mL (5.73 x 10(-6) M) for the 2 drugs, respectively. The molar absorptivities were 4.1 x 10(3) and 3.65 x 10(3) L/mol/cm in Method A and 5.03 x 10(3) and 3.97 x 10(3) L/mol/cm in Method B for the 2 drugs, respectively. The proposed methods were applied successfully for the determination of the 2 drugs in their pharmaceutical formulations. The percentage recoveries +/- standard deviation were 99.57 +/- 0.86 and 100.82 +/- 0.46 for ACV; 99.41 +/- 1.08 and 100.35 +/- 1.03 for RBV. The results obtained were compared statistically with those given by official methods and showed no significant differences regarding accuracy and precision.

Comparison of CZE, MEKC, MEEKC and non-aqueous capillary electrophoresis for the determination of impurities in bromazepam.

The purpose of the present investigation was to develop a test for related substances in the benzodiazepine drug substance bromazepam based on capillary electrophoresis (CE). A final method for the determination of impurities in bromazepam is based on non-aqueous capillary electrophoresis (NACE). Five modes of capillary electrophoresis were investigated and compared for the said purpose. All the CE systems investigated make use of running buffers at low pH in order to protonate the analytes. A low pH of the running buffers was needed as the pK(a) values of benzodiazepines in general are in the range from 1.3 to 4.6. Dynamically coated capillaries were used to overcome the low electro-osmotic flow at low pH in the aqueous buffers investigated. CZE with and without dynamical coating of the internal surface of the fused capillaries was compared and also micellar electrokinetic chromatography (MEKC) as well as microemulsion electrokinetic chromatography (MEEKC) performed in dynamically coated capillaries were investigated. The NACE was chosen as the best technique as the low solubility of the benzodiazepines in water is easily overcome. The NACE system showed good selectivity and detectability for the substances investigated and the limit of quantitation for the impurities corresponded to 0.05% of the drug substance. Linearity was good.