Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters










Database
Language
Publication year range
1.
Article in English | MEDLINE | ID: mdl-34651564

ABSTRACT

This paper describes the synthesis and characterization of Zn2+ decorated (adipic and terephthalic acid as linkers) piperazine-based metal-organic framework (P-MOFs) and their extraction behavior toward the Chicago sky blue (CSB) dye. The formation of Zn2+-decorated P-MOFs was confirmed by FT-IR spectroscopy, energy-dispersive spectroscopy, X-ray diffraction, BET surface area analysis and TGA. Adsorption behavior of the synthesized P-MOFs was explored through solid-phase adsorption (batch method) prior to UV-Vis spectrophotometric determination. Adsorption parameters, including adsorbent dosage, pH of solution, dye concentration, and time, were optimized. Excellent percentage removal of 94% and 95% for AP-Zn-MOF and TP-Zn-MOF, respectively, was achieved at pH 7.5. Kinetics studies indicated that the synthesized adsorbents AP-Zn-MOF and TP-Zn-MOF followed the pseudo-second-order rate model with R2 value 0.9989. The Freundlich isotherm with high R2 value as compared to Langmuir isotherm indicated that CSB adsorption for the synthesized MOFs follows multilayer adsorption.


Subject(s)
Metal-Organic Frameworks , Water Pollutants, Chemical , Adsorption , Carcinogens , Kinetics , Spectroscopy, Fourier Transform Infrared , Textiles , Water Pollutants, Chemical/analysis , Zinc
2.
Environ Res ; 201: 111588, 2021 10.
Article in English | MEDLINE | ID: mdl-34175289

ABSTRACT

In this study, magnetic sporopollenin supported cyanocalixarene (MSP-CyCalix) nanocomposite was synthesized and introduced as an adsorbent material for the removal of pesticides from aqueous media. MSP-CyCalix was characterized by different analytical techniques FTIR, SEM, EDX, BET, VSMand TEM. Chlorpyrifos and hexaconazole pesticides were chosen as model analytes solutions for testing the adsorption efficiency of MSP-CyCalix adsorbent. The adsorption results showed that the incorporated cyano functional groups significantly increased the chemical reactivity and adsorption capacity for pesticides. To obtain the highest possible performance, experimental parameters such as pH, salt, dosage and time were optimized. Adsorption kinetics and isotherms models showed that pesticide adsorption process was well fitted with the pseudo-second-order and Langmuir models with a maximum adsorption capacity of 13.88 mg g-1 and 12.34 mg g-1 and a removal efficiency of >90% for both pesticides. Lastly, MSP-CyCalix maintained a removal efficiency of >80% for ten cycles and 60% after the eleventh cycles of usage. The results proved that MSP-CyCalix nanocomposite can be used as an efficient adsorbent for the removal of pesticide residues from water.


Subject(s)
Pesticides , Biopolymers , Carotenoids , Kinetics , Magnetic Phenomena , Water
3.
J Environ Sci Health B ; 54(12): 930-941, 2019.
Article in English | MEDLINE | ID: mdl-31407615

ABSTRACT

This article demonstrates the first application of a copper-based porous coordination polymer (BTCA-P-Cu-CP) as a carbon paste electrode (CPE) modifier for the detection of malathion. The electrochemical behavior of BTCA-P-Cu-CP/CPE was explored using cyclic voltammetry (CV) while chrono-amperometry methods were applied for the analytical evaluation of the sensor performance. Under optimized conditions, the developed sensor exhibited high reproducibility, stability, and wide dynamic range (0.6-24 nM) with the limits of detection and sensitivity equal to 0.17 nM and 5.7 µAnMcm-1, respectively, based on inhibition signal measurement. Furthermore, the presence of common coexisting interfering species showed a minor change in signals (<4.4%). The developed sensor has been applied in the determination of malathion in spiked vegetable extracts. It exhibited promising results in term of fast and sensitive determination of malathion in real samples at trace level with recoveries of 91.0 to 104.4%. (RSDs < 5%, n = 3). A comparison of the two studied techniques showed that the HPLC technique is unable to detect malathion when the concentration is lower than 1.8 µM while 0.006 µM is detected with appropriate RSDs 0.2-5.2% (n = 3) by amperometric method. Due to the high sensitivity and selectivity, this new electrochemical sensor will be useful for monitoring trace malathion in real samples.


Subject(s)
Copper/chemistry , Electrochemical Techniques/methods , Insecticides/analysis , Malathion/analysis , Metal-Organic Frameworks/chemistry , Plant Extracts/analysis , Vegetables/chemistry , Electrochemical Techniques/instrumentation , Electrodes , Limit of Detection , Pesticide Residues/analysis , Polymers/chemistry
SELECTION OF CITATIONS
SEARCH DETAIL
...