Electronic Modulation of Near-Field Radiative Transfer in Graphene Field Effect Heterostructures.

Manipulating heat flow in a controllable and reversible manner is a topic of fundamental and practical interest. Numerous approaches to perform thermal switching have been reported, but they typically suffer from various limitations, for instance requiring mechanical modulation of a submicron gap spacing or only operating in a narrow temperature window. Here, we report the experimental modulation of radiative heat flow by electronic gating of a graphene field effect heterostructure without any moving elements. We measure a maximum heat flux modulation of 4 ± 3% and an absolute modulation depth of 24 ± 7 mW m-2 V-1 in samples with vacuum gap distances ranging from 1 to 3 µm. The active area in the samples through which heat is transferred is ∼1 cm2, indicating the scalable nature of these structures. A clear experimental path exists to realize switching ratios as large as 100%, laying the foundation for electronic control of near-field thermal radiation using 2D materials.

Anisotropic Quantum Well Electro-Optics in Few-Layer Black Phosphorus.

The incorporation of electrically tunable materials into photonic structures such as waveguides and metasurfaces enables dynamic, electrical control of light propagation at the nanoscale. Few-layer black phosphorus is a promising material for these applications due to its in-plane anisotropic, quantum well band structure, with a direct band gap that can be tuned from 0.3 to 2 eV with a number of layers and subbands that manifest as additional optical transitions across a wide range of energies. In this Letter, we report an experimental investigation of three different, anisotropic electro-optic mechanisms that allow electrical control of the complex refractive index in few-layer black phosphorus from the mid-infrared to the visible: Pauli-blocking of intersubband optical transitions (the Burstein-Moss effect); the quantum-confined Stark effect; and the modification of quantum well selection rules by a symmetry-breaking, applied electric field. These effects generate near-unity tuning of the BP oscillator strength for some material thicknesses and photon energies, along a single in-plane crystal axis, transforming absorption from highly anisotropic to nearly isotropic. Lastly, the anisotropy of these electro-optical phenomena results in dynamic control of linear dichroism and birefringence, a promising concept for active control of the complex polarization state of light, or propagation direction of surface waves.

Publisher Correction: Materials challenges for the Starshot lightsail.

In the version of this Perspective originally published, Fig. 1 was missing the following credit line from the caption: 'Background image from ESA/Hubble (A. Fujii).' This has now been corrected in the online versions of the Perspective.

Publisher Correction: Materials challenges for the Starshot lightsail.

In the version of this Perspective originally published, the titles of the references were missing; all versions have now been amended to include them.

Emerging photonic architectures in two-dimensional opto-electronics.

The isolation of thermodynamically stable, free standing materials with single to few atom thicknesses has brought about a revolution in materials science, condensed matter physics and device engineering for opto-electronic applications. These two dimensional (2D) materials cover a broad range of electronic properties ranging from zero-band gap, semi-metallic graphene to wide band gap semiconductors in sulfides and selenides of Mo and W to metallic behavior in Ti, Nb and Ta sulfides and selenides. This permits their potential application in opto-electronic devices from terahertz frequencies up to the ultraviolet portion of the spectrum. However, their atomically thin nature poses fundamental challenges in driving efficient light-matter interactions. A range of strategies have been explored from the area of photonics and resonant optics that enhance the coupling and interaction of light with atomically thin layers to overcome this challenge. By comparing and contrasting critical advantages of integrating nanophotonic elements with 2D materials, this review highlights the challenges and advantages of such opto-electronic devices.

Active Radiative Thermal Switching with Graphene Plasmon Resonators.

We theoretically demonstrate a near-field radiative thermal switch based on thermally excited surface plasmons in graphene resonators. The high tunability of graphene enables substantial modulation of near-field radiative heat transfer, which, when combined with the use of resonant structures, overcomes the intrinsically broadband nature of thermal radiation. In canonical geometries, we use nonlinear optimization to show that stacked graphene sheets offer improved heat conductance contrast between "ON" and "OFF" switching states and that a >10× higher modulation is achieved between isolated graphene resonators than for parallel graphene sheets. In all cases, we find that carrier mobility is a crucial parameter for the performance of a radiative thermal switch. Furthermore, we derive shape-agnostic analytical approximations for the resonant heat transfer that provide general scaling laws and allow for direct comparison between different resonator geometries dominated by a single mode. The presented scheme is relevant for active thermal management and energy harvesting as well as probing excited-state dynamics at the nanoscale.

High Photovoltaic Quantum Efficiency in Ultrathin van der Waals Heterostructures.

We report experimental measurements for ultrathin (<15 nm) van der Waals heterostructures exhibiting external quantum efficiencies exceeding 50% and show that these structures can achieve experimental absorbance >90%. By coupling electromagnetic simulations and experimental measurements, we show that pn WSe2/MoS2 heterojunctions with vertical carrier collection can have internal photocarrier collection efficiencies exceeding 70%.

Experimental Demonstration of >230° Phase Modulation in Gate-Tunable Graphene-Gold Reconfigurable Mid-Infrared Metasurfaces.

Metasurfaces offer significant potential to control far-field light propagation through the engineering of the amplitude, polarization, and phase at an interface. We report here the phase modulation of an electronically reconfigurable metasurface and demonstrate its utility for mid-infrared beam steering. Using a gate-tunable graphene-gold resonator geometry, we demonstrate highly tunable reflected phase at multiple wavelengths and show up to 237° phase modulation range at an operating wavelength of 8.50 µm. We observe a smooth monotonic modulation of phase with applied voltage from 0° to 206° at a wavelength of 8.70 µm. Based on these experimental data, we demonstrate with antenna array calculations an average beam steering efficiency of 23% for reflected light for angles up to 30° for this range of phases, confirming the suitability of this geometry for reconfigurable mid-infrared beam steering devices. By incorporating all nonidealities of the device into the antenna array calculations including absorption losses which could be mitigated, 1% absolute efficiency is achievable up to 30°.

Field Effect Optoelectronic Modulation of Quantum-Confined Carriers in Black Phosphorus.

We report measurements of the infrared optical response of thin black phosphorus under field-effect modulation. We interpret the observed spectral changes as a combination of an ambipolar Burstein-Moss (BM) shift of the absorption edge due to band-filling under gate control, and a quantum confined Franz-Keldysh (QCFK) effect, phenomena that have been proposed theoretically to occur for black phosphorus under an applied electric field. Distinct optical responses are observed depending on the flake thickness and starting carrier concentration. Transmission extinction modulation amplitudes of more than two percent are observed, suggesting the potential for use of black phosphorus as an active material in mid-infrared optoelectronic modulator applications.

Near-Unity Absorption in van der Waals Semiconductors for Ultrathin Optoelectronics.

We demonstrate near-unity, broadband absorbing optoelectronic devices using sub-15 nm thick transition metal dichalcogenides (TMDCs) of molybdenum and tungsten as van der Waals semiconductor active layers. Specifically, we report that near-unity light absorption is possible in extremely thin (<15 nm) van der Waals semiconductor structures by coupling to strongly damped optical modes of semiconductor/metal heterostructures. We further fabricate Schottky junction devices using these highly absorbing heterostructures and characterize their optoelectronic performance. Our work addresses one of the key criteria to enable TMDCs as potential candidates to achieve high optoelectronic efficiency.

Electronic modulation of infrared radiation in graphene plasmonic resonators.

All matter at finite temperatures emits electromagnetic radiation due to the thermally induced motion of particles and quasiparticles. Dynamic control of this radiation could enable the design of novel infrared sources; however, the spectral characteristics of the radiated power are dictated by the electromagnetic energy density and emissivity, which are ordinarily fixed properties of the material and temperature. Here we experimentally demonstrate tunable electronic control of blackbody emission from graphene plasmonic resonators on a silicon nitride substrate. It is shown that the graphene resonators produce antenna-coupled blackbody radiation, which manifests as narrow spectral emission peaks in the mid-infrared. By continuously varying the nanoresonator carrier density, the frequency and intensity of these spectral features can be modulated via an electrostatic gate. This work opens the door for future devices that may control blackbody radiation at timescales beyond the limits of conventional thermo-optic modulation.

Integrating simulations and experiments to predict sheet resistance and optical transmittance in nanowire films for transparent conductors.

Metal nanowire films are among the most promising alternatives for next-generation flexible, solution-processed transparent conductors. Breakthroughs in nanowire synthesis and processing have reported low sheet resistance (Rs ≤ 100 Ω/sq) and high optical transparency (%T > 90%). Comparing the merits of the various nanowires and fabrication methods is inexact, because Rs and %T depend on a variety of independent parameters including nanowire length, nanowire diameter, areal density of the nanowires and contact resistance between nanowires. In an effort to account for these fundamental parameters of nanowire thin films, this paper integrates simulations and experimental results to build a quantitatively predictive model. First, by fitting the results from simulations of quasi-2D rod networks to experimental data from well-defined nanowire films, we obtain an effective average contact resistance, which is indicative of the nanowire chemistry and processing methods. Second, this effective contact resistance is used to simulate how the sheet resistance depends on the aspect ratio (L/D) and areal density of monodisperse rods, as well as the effect of mixtures of short and long nanowires on the sheet resistance. Third, by combining our simulations of sheet resistance and an empirical diameter-dependent expression for the optical transmittance, we produced a fully calculated plot of optical transmittance versus sheet resistance. Our predictions for silver nanowires are validated by experimental results for silver nanowire films, where nanowires of L/D > 400 are required for high performance transparent conductors. In contrast to a widely used approach that employs a single percolative figure of merit, our method integrates simulation and experimental results to enable researchers to independently explore the importance of contact resistance between nanowires, as well as nanowire area fraction and arbitrary distributions in nanowire sizes. To become competitive, metal nanowire systems require a predictive tool to accelerate their design and adoption for specific applications.