Superhydrophobic/Superhydrophilic Janus Evaporator for Extreme High Salt-Resistance Solar Desalination by an Integrated 3D Printing Method.

The emerging solar desalination technology has incomparable advantages for providing a clean water solution. However, the issue of salt accumulation on the solar evaporator tops during the steam generation leads to a considerable decrease in the evaporation rate. Herein, we demonstrate a superhydrophobic/superhydrophilic Janus evaporator that enables a stable solar evaporation even in saturated brine. Our Janus solar evaporator with a superhydrophobic top and a superhydrophilic bottom has been manufactured integrally, allowing for a fast steam evaporation without the impediment of the accumulated salt residues. The superhydrophobic top changes the water passageway from the center toward the edges while it allows for the vertical transport of both solar thermo and evaporated steams. Salt residues would only be deposited at the edges of the superhydrophilic bottom, allowing for a long-term stability of the evaporator for a continuous (>50 h) solar evaporation in saturated brine, which is record-breaking for salt-resistant solar evaporators. With stable and efficient evaporation performance out of high-salinity brine, this work provides a fascinating avenue for the desalination of seawater in a salt-resistant and efficient manner.

Large-Scale, Abrasion-Resistant, and Solvent-Free Superhydrophobic Objects Fabricated by a Selective Laser Sintering 3D Printing Strategy.

Manufacturing abrasion-resistant superhydrophobic matters is challenging due to the fragile feature of the introduced micro-/nanoscale surface roughness. Besides the long-term durability, large scale at meter level, and 3D complex structures are of great importance for the superhydrophobic objects used across diverse industries. Here it is shown that abrasion-resistant, half-a-meter scaled superhydrophobic objects can be one-step realized by the selective laser sintering (SLS) 3D printing technology using hydrophobic-fumed-silica (HFS)/polymer composite grains. The HFS grains serve as the hydrophobic guests while the sintered polymeric network provides the mechanical strength, leading to low-adhesion, intrinsic superhydrophobic objects with desired 3D structures. It is found that as-printed structures remained anti-wetting capabilities even after undergoing different abrasion tests, including knife cutting test, rude file grinding test, 1000 cycles of sandpaper friction test, tape test and quicksand impacting test, illustrating their abrasion-resistant superhydrophobic stability. This strategy is applied to manufacture a shell of the unmanned aerial vehicle and an abrasion-resistant superhydrophobic shoe, showing the industrial customization of large-scale superhydrophobic objects. The findings thus provide insight for designing intrinsic superhydrophobic objects via the SLS 3D printing strategy that might find use in drag-reduce, anti-fouling, or other industrial fields in harsh operating environments.

3D-printed solar evaporator with seashell ornamentation-inspired structure for zero liquid discharge desalination.

Solar-driven interfacial evaporation has enormous promise for fresh water recovery and salt harvesting, but salt accumulation-related challenges stand in its way. Herein, we report a spined groove-ridge pairs inspired by the shell ornamentation of the Vasticardium vertebratum, which addresses salt accumulation by artfully integrating salt reflux into localized salt crystallization. The seashell-mimetic radial V-groove array enables the 3D evaporator to transport water rapidly and directionally, resulting in high-performance water evaporation (∼95% efficiency) and localized crystallization. The periodic spines enlightened by the spine-bearing ridge on the seashell provide considerable micro-unit salt reflux. The 2-in-1 integration design endows the three-dimensional evaporator with superior solar-driven zero liquid discharge and excellent long-term salt resistance even when dealing with high-salinity brine (20 wt% NaCl) and a series of heavy metallic salt solutions. Our design offers a new alternative solution to avoiding salt scaling and could advance locally crystallized solar evaporators towards practical applications.

Superhydrophilic three-dimensional porous spent coffee ground reduced palladium nanoparticles for efficient catalytic reduction.

The use of functional biodegradable wastes to treat environmental problems would create minimal extra burden to our environment. In this paper, we propose a sustainable and practical strategy to turn spent coffee ground (SCG) into a multifunctional palladium-loaded catalyst for water treatment instead of going into landfill as solid waste. Bleached delignified coffee ground (D-SCG) has a porous structure and a good capability to reduce Pd (II) to Pd (0). A large amount of nanocellulose is formed on the surface of SCG after bleaching by H2O2, which anchors and disperses the palladium nanoparticles (Pd NPs). The D-SCG loaded with Pd NPs (Pd-D-SCG) is superhydrophilic, which facilitates water transport and thus promotes efficient removal of organic pollutants dissolved in water. Pd-D-SCG exhibits excellent room temperature catalytic activity for the removal of 4-nitrophenol (4-NP) and methylene blue (MB) in water and shows good chemical stability and recyclability in water, with no obvious decrease even after five repeated cycles.

From brown to colored: Polylactic acid composite with micro/nano-structured white spent coffee grounds for three-dimensional printing.

Functional fillers in three-dimensional (3D) printing composite filaments offer an innovative way spent coffee grounds (SCGs) can be reused. However, the inherent brownness of SCGs places a limit on the color in which the composite filament and, consequently, the finished print appears. Herein, colored composite filaments for fused deposition modeling were successfully fabricated, where micro/nano-structured decolorized SCGs (MN-DSCGs) were embedded within polylactic acid (PLA) matrix. At the optimum condition, the 3D prints using composite filaments exhibit comparable tensile and flexural strength to the PLA counterparts. Also, they demonstrate superior melt flow and excellent print quality. Under the same condition, 3D printed MN-DSCGs/PLA blend has sufficient color restoration as compared to the prints using virgin PLA.

The effect of surface modification on chemical and crystalline structure of the cellulose III nanocrystals.

Although the research on the cellulose allomorphs has been progressing for decades, many details especially in a nanoscale still require further exploration. In this article, the crystalline structure and morphology of cellulose III nanocrystals (CNC-III) are investigated after some typical modification routes. The results indicate that the crystalline structure of CNC-III is unsteady. After acetylation, hydrophobic cationization, polymer grafting and surface alkylation, CNC-III keep the original crystalline morphology but the crystallinity (62.8 %) decrease to 31.0 %, 42.5 %, 43.1 % and 43.8 %, respectively. However, after TEMPO-mediated oxidation and hydrophilic cationization, the crystalline structure of CNC-III transforms to the cellulose polymorph I and II, respectively. After modification, the dispersibility and thermal stability of CNC-III samples have been changed. Therefore, this systematic investigation is of great significance for understanding the effect of surface modification on the chemical and crystalline structure of CNC-III, which will provide a reference for future modifications and applications.

High-strength paper enhanced by chitin nanowhiskers and its potential bioassay applications.

In this paper, nanochitin was used as an alternative natural nanomaterial to combine with cellulose fibers for fabricating high-strength paper. Two typical chitin nanowhiskers having contrasting sign of surface charge were compared to evaluate the enhancement performance on paper in details. The results show that nanochitin with positive charges on the surface has a significant effect on the strength properties of the prepared paper, especially on wet strength. When the dosage of chitin nanowhiskers was 2%, the wet strength index was increased to 2.48 N·m/g, which is important for paper-based analytical devices with the common use in liquid analysis. Typical colorimetric glucose assays were successfully performed, suggesting the improved analytical performance on these prepared paper.

Fabrication of transparent and superhydrophobic nanopaper via coating hybrid SiO2/MWCNTs composite.

Nanopaper prepared from cellulose nanofibers (CNFs) is a kind of promising substrate for various high-tech devices. However, several drawbacks including poor water stability and weak corrosion resistance still remain, which limit the practical applications of the nanopaper. Herein, we present a simple and low-cost method for fabricating transparent and superhydrophobic nanopaper by spraying fluorinated silica/multi-walled carbon nanotubes (SiO2/MWCNTs) composite on the nanopaper. A series of functional nanopaper were fabricated, which shows excellent performance of water repellency, chemical stability, conductivity, thermostability and self-cleaning property. Among them, the nanopaper modified with the composite containing 0.5 wt% MWCNTs has a water contact angle of about 163°, transparency of 79.96% and the sheet resistance of 3.15 × 106 Ω sq-1. The combination of the promising features in a material offers attractive prospects, and enables our nanopaper could be tailored for emerging applications such as flexible electronics, display protection and intelligent packages.

Engineering Biocompatible Hydrogels from Bicomponent Natural Nanofibers for Anticancer Drug Delivery.

Natural hydrogels have attracted extensive research interest and shown great potential for many biomedical applications. In this study, a series of biocompatible hydrogels was reported based on the self-assembly of positively charged partially deacetylated α-chitin nanofibers (α-DECHN) and negatively charged 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNF) for anticancer drug delivery. The formation mechanisms of the α-DECHN/TOCNF hydrogels with different mixing proportions were studied, and their morphological, mechanical, and swelling properties were comprehensively investigated. Additionally, the drug delivery performance of the hydrogels was compared via sustained release test of an anticancer drug (5-fluorouracil). The results showed that the hydrogel with higher physical cross-linking degree exhibited a higher drug loading efficiency and drug release percentage.