[Design and Fabrication of Porous Implants Manufactured by 3D Printing].

Different porous structures were studied through finite element analysis and then optimal porous structure was selected for the orthopedic applications. The optimal Voronoi structure was designed and fabricated using 3D printing. The mechanical properties and osseointegration ability were both investigated. The mechanical tests showed that the tensile strength, compressive strength and bending strength of Voronoi structures were obviously higher than that of the human bone, and the modulus of Voronoi structures were similar to human bone. In addition, the animal experimental results exhibited that obvious bone ingrowth was found from Month 1 to Month 6. This study provides some theoretical references for the orthopedic application of porous structures.

Implant-derived magnesium induces local neuronal production of CGRP to improve bone-fracture healing in rats.

Orthopedic implants containing biodegradable magnesium have been used for fracture repair with considerable efficacy; however, the underlying mechanisms by which these implants improve fracture healing remain elusive. Here we show the formation of abundant new bone at peripheral cortical sites after intramedullary implantation of a pin containing ultrapure magnesium into the intact distal femur in rats. This response was accompanied by substantial increases of neuronal calcitonin gene-related polypeptide-α (CGRP) in both the peripheral cortex of the femur and the ipsilateral dorsal root ganglia (DRG). Surgical removal of the periosteum, capsaicin denervation of sensory nerves or knockdown in vivo of the CGRP-receptor-encoding genes Calcrl or Ramp1 substantially reversed the magnesium-induced osteogenesis that we observed in this model. Overexpression of these genes, however, enhanced magnesium-induced osteogenesis. We further found that an elevation of extracellular magnesium induces magnesium transporter 1 (MAGT1)-dependent and transient receptor potential cation channel, subfamily M, member 7 (TRPM7)-dependent magnesium entry, as well as an increase in intracellular adenosine triphosphate (ATP) and the accumulation of terminal synaptic vesicles in isolated rat DRG neurons. In isolated rat periosteum-derived stem cells, CGRP induces CALCRL- and RAMP1-dependent activation of cAMP-responsive element binding protein 1 (CREB1) and SP7 (also known as osterix), and thus enhances osteogenic differentiation of these stem cells. Furthermore, we have developed an innovative, magnesium-containing intramedullary nail that facilitates femur fracture repair in rats with ovariectomy-induced osteoporosis. Taken together, these findings reveal a previously undefined role of magnesium in promoting CGRP-mediated osteogenic differentiation, which suggests the therapeutic potential of this ion in orthopedics.

3-D finite element analysis of the influence of synovial condition in sacroiliac joint on the load transmission in human pelvic system.

The anterior part of the sacroiliac joint (SIJ) is a synovial joint, with little gliding and rotary movement between the contact surfaces of SIJ during locomotion. Due to its complex structure, especially when considering the surrounding ligaments, it is difficult to construct an accurate three-dimensional (3-D) finite element model for the human pelvis. Most of the pelvic models in the previous studies were simplified with either SIJ fusing together or without the sacral bone. However, the influence of those simplifications on the load transmission in human pelvis has not been studied, so the reliability of those studies remains unclear. In this study, two 3-D pelvic models were constructed: an SIJ fusing model and an SIJ contacting model. In the SIJ fusing model, the SIJ interfaces were fused together. In the SIJ contacting model, the SIJ interfaces were just in contact with each other without fusion. Compared with the SIJ contacting model, the SIJ fusing model have smaller movements in the SIJ. The stress distribution area in the SIJ fusing model on sacroiliac cartilages was also different. Those differences contributed to the decline of tensile force in the SIJ surrounding ligaments and the re-distribution of stress in the pelvic bones. In addition, the SIJ fusing model was far less sensitive to the increase in modulus of the sacroiliac cartilages, and decrease in stiffness of the ligaments surrounding the SIJ. The presence of synovia in the SIJ had greater influence on the load transmission in the human pelvic system. Therefore, the effect of the presence of synovia should not be neglected when the biomechanical behavior of human pelvis is being studied, especially for those studies related to clinical applications.

[Evaluation of acetabular cup placement precision in Stryker computer-assisted navigated total hip arthroplasty].

To contrast the methodology of measuring cup placement precision utilizing Mimics and Matlab programming, based on clinical CT images of primary THA cases with computer assisted navigated surgery (CANS) and with the traditional manual method (MANS). The method was applied and analyzed to measure cup anteversion, cup abduction of 50 clinical cases with CANS and MANSThe results show that, cup placement precision differences exits between primary THA cases with CANS and MANS; more cases with CANS are within the safe zone contrasting MANS, and there was less variation and less placement error in CANS cases. CANS can improve cup placement precision and reduce the chance of dislocation efficiently.

A novel, inexpensive and easy to use tendon clamp for in vitro biomechanical testing.

Frozen clamps can hold tendons and ligaments tightly and transmit high loads, from 4 kN to 13 kN, without slippage, yet they are complex and expensive. The existing non-frozen serrated jaw clamp is simple to fabricate and use, but the maximal tensile force it can sustain is only about 2.5 kN, which is not enough in many biomechanical tests. In this study, a new type of non-frozen clamp, which has lateral block boards and asymmetrical teeth jaws, was designed. The lateral block boards made of titanium alloy were used to prevent the soft tissues from being squeezed out during compressing, while the asymmetrical teeth jaws made of nylon were used to grip and keep holding soft tissues. The capability of this new type of clamp was tested by stretching five cattle tendons to failure on the tensile and compression testing machine, none of them displayed any slippage before rupture, the maximum tension force was 6.87 kN. This non-frozen asymmetrical teeth jaw clamp was designed for gripping tendons in foot and ankle dynamic simulation test, but it can also be applied to other in vitro tests, such as hip and knee dynamic tests.

Timing jitter of femtosecond solitons in single-mode optical fibers: a perturbation model.

On the basis of the higher-order nonlinear Schrödinger equation, an extended soliton perturbation model is proposed. The evolution equations for the soliton parameters and the resultant expressions for timing jitter are derived. Subsequently, the model is tested to be correct in the subpicosecond-femtosecond regime through direct numerical simulations of the underlying equation by using the stochastic split-step Fourier method. It is shown that the results of our numerical simulations are in excellent agreement with analytical predictions for timing jitter. It is found that the Gordon-Haus jitter for dark solitons is nearly 1/sqrt[2] of that for bright solitons, and that the Raman jitter always dominates the Gordon-Haus jitter in the femtosecond regime. In particular, the stabilities of the solitary waves are demonstrated under the Gaussian white noise. It is expected that for bright and dark solitons, the present equations of motion would find extensive applications in the high-speed communication systems more than those obtained by use of the well-known perturbation theory about the nonlinear Schrödinger equation [J. Opt. Soc. Am. B 18, 153 (2001)].