"Polyoxometalate electron sponge" induces the accurate regulation of electron states at Ni sites to enhance oxidation of water.

Because of their special features, NiFe-LDHs (nickel iron layered double hydroxides) are prospective OER (oxygen evolution reaction) catalysts that might be utilized to catalyse the electrolysis of water and produce hydrogen to address the energy crisis. In this work, the electronic structure and electrocatalytic performance of the NiFe-LDH were accurately regulated by optimizing the Ni sites, which was enabled by adjacent metal sites coordinated with the "polyoxometalate electron sponge". With extension of the modification time, the Ni 2p binding energy, the Ni3+/Ni2+ ratio and the OER properties were gradually tuned, which indicated accurate regulation of active Ni sites by the "polyoxometalate electron sponge" on a temporal scale. Additionally, NiFe-LDH-PW12-12 h (NiFe-LDH modified by polyoxometalate anions for 12 h) showed the highest OER performance along with fast electron transfer, superior reaction kinetics and electrochemical durability, with an overpotential ∼68 mV lower than that of NiFe-LDH. This work provides an accurate strategy for regulating the electronic structures of active metal sites for the OER.

Single-Atom Mn Catalysts via Integration with Mn Sub Nano-Clusters Synergistically Enhance Oxygen Reduction Reaction.

Integrating single atoms and clusters into one system represents a novel strategy for achieving the desired catalytic performance. In comparison to single-atom catalysts, catalysts combining single atoms and clusters harness the advantages of both, thus displaying greater potential. Nevertheless, constructing single-atom-cluster systems remains challenging, and the fundamental mechanism for enhancing catalytic activity remains elusive. In this study, a directly confined preparation of a 3D hollow sea urchin-like carbon structure (MnSA/MnAC-SSCNR) is developed. Mn single atoms synergistically interact with Mn clusters, optimizing and reducing energy barriers in the reaction pathway, thus enhancing reaction kinetics. Consequently, in contrast to Mn single-atom catalysts (MnSA-SSCNR), MnSA/MnAC-SSCNR exhibits significantly improved oxygen reduction activity, with a half-wave potential (E1/2) of 0.90 V in 0.1 m KOH, surpassing that of MnSA-SSCNR and Pt/C. This work demonstrates a strategy of remote synergy between heterogeneous single atoms and clusters, which not only contributes to electrocatalytic reactions but also holds potential for reactions involving more complex products.

Isolation of antibody by polymer microspheres embedded with E. coli displaying IgG-binding domain.

Antibody purification is an important aspect of quality and cost control in the production process of antibody drugs. In this study, modified E. coli was embedded into polymer microspheres (polyvinyl alcohol/alginate) for antibody separation and the IgG binding domain was displayed on the surface of E. coli. The results showed that ZZ protein (Fc binding domain of the antibody) was successfully displayed on the surface of E. coli and was embedded in polyvinyl alcohol/alginate microspheres. In addition, it has excellent specific adsorption capacity for antibodies, with a maximum adsorption capacity of 35.74 mg/g (wet microspheres). Through the adsorption isotherm and adsorption kinetics simulation, the adsorption of IgG on the microsphere matrix conforms to the Langmuir model and follows the pseudo-first-order kinetic equation. The microsphere matrix can undergo saturation adsorption at pH 7.2 and desorption at around pH 3.0. Desorption characteristics are consistent with those of rProtein A Sepharose FF®. After five cycles of the adsorption-desorption processes, the IgG adsorption capacity remains above 80%. Using polymer microspheres to separate antibodies from mouse ascites, the antibody purity reached 86.7% and the yield was 83.5%. These results provide an alternative to protein A matrix with low-cost, fast preparation and moderate efficiency.

A general strategy for protein affinity-ligand oriented-immobilization and screening for bioactive compounds.

Natural products containing complex mixtures of potentially bioactive compounds are a major source of new drugs, however, conventional screening for active compounds is a time-consuming and inefficient process. Here, we reported that a facile and efficient protein affinity-ligand oriented-immobilization strategy based on the SpyTag/SpyCatcher(ST/SC) chemistry, was used for bioactive compound screening. Two ST-fused model proteins, that is, GFP (green fluorescent protein) and PqsA (a critical enzyme in the quorum sensing pathway of Pseudomonas aeruginosa), were used to verify the feasibility of this screening method. GFP, as the capturing protein model, was ST-labeled and anchored at a specific orientation onto the surface of activated agarose coupled with SC protein via ST/SC self-ligation. The affinity carriers were characterized by infrared spectroscopy and fluorography. The spontaneity and site-specificity of this unique reaction were confirmed via electrophoresis and fluorescence analyses. Although the alkaline stability of the affinity carriers was not ideal, its pH stability was acceptable under pH < 9. The general preparation strategy of this affinity carriers was validated by replacing GFP with PqsA, and PqsA inhibitor, 2-amino-6-fluorobenzoic acid, was successfully isolated from the fermentation broth. The proposed strategy can immobilize protein ligands in one-step and screen compounds that interact specifically with the ligands.

Electrochemical degradation of antibiotic enoxacin using a novel PbO2 electrode with a graphene nanoplatelets inter-layer: Characteristics, efficiency and mechanism.

A novel PbO2 electrode was fabricated by adding graphene nanoplatelets (GNP) inter-layer into ß-PbO2 active layer (called GNP-PbO2) and utilized to degradation of antibiotic enoxacin (ENO). The GNP-PbO2 electrode had a much rougher surface than the typical PbO2 electrode, with smaller crystal size and lower charge-transfer resistance at the electrode/electrolyte interface. Notably, the GNP inter-layer increased the oxygen evolution potential of PbO2 electrode (2.05 V vs. SCE), which was very beneficial to inhibit oxygen evolution and promote ·OH production. The relatively best operating parameters for ENO removal and energy efficiency were current density of 20 mA cm-2, initial pH of 7, initial ENO concentration of 100 mg L-1 and electrode distance of 4 cm. Furthermore, indirect radical oxidation was found to be the main way during electrolysis process. Based on the observed analysis of intermediate products, the main reaction pathways of ENO included hydroxylation, defluorination and piperazine ring-opening. Finally, combinating with the electro-oxidation capability, stability and safety evaluation, we can conclude that GNP-PbO2 is a promising anode for treatment of various organic pollutants in wastewater.

"Lewis Base-Hungry" Amorphous-Crystalline Nickel Borate-Nickel Sulfide Heterostructures by In Situ Structural Engineering as Effective Bifunctional Electrocatalysts toward Overall Water Splitting.

The development of high-performance, low-cost, and long-lasting electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is urgently needed for effective electrochemical water splitting. In the present study, an engineering process was employed to prepare "Lewis base-hungry" amorphous-crystalline nickel borate-nickel sulfide (Ni3(BO3)2-Ni3S2) heterostructures, which exhibited unprecedentedly high electrocatalytic activity toward both OER and HER in alkaline media. The optimal Ni3(BO3)2-Ni3S2/nickel foam (Ni3(BO3)2-Ni3S2/NF) electrode displayed an ultralow overpotential of only -92 and +217 mV to reach the current density of 10 mA cm-2 for HER and OER, respectively. When the Ni3(BO3)2-Ni3S2/NF electrode was used as both the anode and cathode for overall water splitting, a low cell voltage of 1.49 V was needed to achieve the current density of 10 mA cm-2, which was superior to the performance of most noble metal-free electrocatalysts. Results from density functional theory calculations showed that the Lewis base-hungry sites in the heterostructures effectively enhanced the chemisorption of hydrogen and oxygen intermediates, a critical step in HER and OER electrocatalysis. Results from this study highlight the significance of rational design and engineering of heterostructured materials for the development of high-efficiency electrocatalysts.

Engineering Lithium Ions Embedded in NiFe Layered Double Hydroxide Lattices To Activate Laminated Ni2+ Sites as High-Efficiency Oxygen Evolution Reaction Catalysts.

NiFe layered double hydroxides (LDHs) have been denoted as benchmark non-noble-metal electrocatalysts for the oxygen evolution reaction (OER). However, for laminates of NiFe LDHs, the edge sites are active, but the basal plane is inert, leading to underutilization as catalysts for the OER. Herein, for the first time, light and electron-deficient Li ions are intercalated into the basal plane of NiFe LDHs. The results of theoretical calculations and experiments both showed that electrons would be transferred from near Ni2+ to the surroundings of Li+ , resulting in electron-deficient properties of the Ni sites, which would function as "electron-hungry" sites, to enhance surface adsorption of electron-rich oxygen-containing groups, which would enhance the effective activity for the OER. As demonstrated by the catalytic performance, the Li-NiFe LDH electrodes showed an ultralow overpotential of only 298 mV at 50 mA cm-2 , which was lower than that of 347 mV for initial NiFe LDHs and lower than that of 373 mV for RuO2 . Reasonable intercalation adjustment effectively activates laminated Ni2+ sites and constructs the electron-deficient structure to enhance its electrocatalytic activity, which sheds light on the functional treatment of catalytic materials.