Silver-coated hollow fiber surface plasmon resonance sensor for glucose detection with enhanced limit of detection.

A fiber-optic surface plasmon resonance (SPR) biosensor based on a silver-coated hollow fiber (HF) structure for glucose detection is presented. The sensor surface was immobilized with 4-mercaptophenylboronic acid (PMBA) acting as a glucose recognition monolayer. Then, gold nanoparticles (AuNPs) modified with 2-aminoethanethiol (2-AET) and PMBA were introduced onto the sensor surface after glucose was captured to enhance the wavelength shift of the SPR phenomenon excited by the light transmitted in the wall of the HF sensor. Instead of the conventional one-step sensitization pretreatment commonly used in the deposition process of silver films for fiber-optic SPR sensors, a sensitization-activation two-step activation method was adopted in the fabrication of the proposed sensor. Experiments for glucose detection were performed on the fabricated sensors in the concentration range of 1 nM-1 mM. Results showed that the sensor fabricated by the two-step activation method has a much larger shift of resonance wavelength than the sensor fabricated using the one-step sensitization method. The resonance wavelength shift was found to be linear to the logarithm of the concentration in the range of 1 nM-1 mM. The sensor achieved a limit of detection (LOD) of as low as 1 nM, which is at least an order of magnitude lower than that of other fiber-optic sensors for glucose detection reported previously. The presented HF glucose sensor has the potential for biosensing applications and provides a large reference value in the study of optical fiber SPR sensors for biosensing.

Long-range surface plasmon resonance-based hollow fiber temperature sensor with ultrahigh sensitivity and tunable detection range.

A dielectric/Ag-coated hollow fiber (HF) temperature sensor based on long-range surface plasmon resonance (LRSPR) is proposed and experimentally demonstrated. The structural parameters, including the dielectric material and layer thicknesses, are optimized through comprehensive theoretical analysis to achieve the best performance. By filling it with a high refractive index (RI) thermosensitive liquid, the GK570/Ag-coated HF temperature sensor with optimal structural parameters is fabricated. Due to the high sensitivity of the LRSPR sensor and the optimized design, the fabricated sensor achieves a temperature sensitivity of 3.6∼20.5 nm/°C, which is almost the highest among the optical fiber temperature sensors based on surface plasmon resonance reported experimentally. Moreover, the detection range of the proposed sensor can be easily tuned up to 170°C by varying the RI of the filled thermosensitive liquid, and the sensor performance remains stable. Considering that most temperature sensors using polydimethylsiloxane have a fixed detection range, this is an outstanding advantage that could expand the application field of the optical fiber temperature sensor.

Diagnosis and Treatment of Water-Contaminated Severe Legionella Pneumonia with Digestive Symptoms as the First Symptom: A Case Report and Review of the Literature.

Introduction: Although Legionella is not the most common pathogen of community-acquired pneumonia, the epidemiological distribution of pneumonia pathogens has changed in recent years, with a gradual increase in some rare pathogens. For example, pneumonia that occurs after water source contamination is mostly caused by Legionella infection. This paper reports the diagnosis and treatment process of a patient after Legionella infection, who had misdiagnosis at the beginning, rapidly progressed to severe disease and combined with fungal infection. This article focuses on the timely and effective treatment of rapidly progressing Legionella pneumonia, in anticipation of a better understanding of the diagnosis and treatment of the disease. Case Presentation: Here, we report a case of legionella infection with the nausea, vomiting as the first symptoms accompanied by weakness, chills, dizziness, abdominal discomfort in a 75-year-old female. The patient had a history of type 2 diabetes for 30 years, diabetic peripheral neuropathy for more than 20 years, arterial hypertension for 10 years, bone hyperplasia for more than 5 years, resection of right-sided thyroid cystadenoma in 1990. The patient had firstly been diagnosed with cholecystitis and gallbladder neck stones, diet abstinence, metronidazole, cefoperazone sulbactam, and rehydration were given. The patient responded poorly to these empiric treatments. The patient was given moxifloxacin in combination with azithromycin after the onset of respiratory symptoms, but the condition continued to deteriorate, and tigecycline was subsequently added. After the mechanical ventilation and the treatment plan adjusting, she improved significantly. Conclusion: Immunocompromised patient combined with underlying diseases are more susceptible to infection in an environment contaminated with Legionella, and the rapid onset and atypical respiratory symptoms make it easy to misdiagnose the disease, thus delaying treatment and leading to further deterioration. Timely diagnosis, early mechanical ventilation and rational drug administration were fundamental to treat Legionella pneumonia.

Surface-Enhanced Raman Scattering in Silver-Coated Suspended-Core Fiber.

In this paper, the silver-coated large-core suspended-core fiber (LSCF) probe was fabricated by the dynamic chemical liquid phase deposition method for surface-enhanced Raman scattering (SERS) sensing. The 4-mercaptophenylboronic acid (4-MPBA) monolayer was assembled in the LSCF as the recognition monolayer. Taking advantage of the appropriate core size of the LSCF, a custom-made Y-type optical fiber patch cable was utilized to connect the semiconductor laser, Raman spectrometer, and the proposed fiber SERS probe. The SERS signal is propagated in the silver-coated air channels, which can effectively reduce the Raman and fluorescence background of the silica core. Experiments were performed to measure the Raman scattering spectra of the 4-MPBA in the silver-coated LSCF in a non-enhanced and enhanced case. The experiment results showed that the Raman signal strength was enhanced more than 6 times by the surface plasmon resonance compared with the non-enhanced case. The proposed LSCF for SERS sensing technology provides huge research value for the fiber SERS probes in biomedicine and environmental science. The combination of SERS and microstructured optical fibers offers a potential approach for SERS detection.

Surface plasmon resonance temperature sensor with tunable detection range based on a silver-coated multi-hole optical fiber.

A novel surface plasmon resonance (SPR) temperature sensor based on a silver-coated multi-hole optical fiber (SMHOF) is presented. The central and surrounding air holes of the SMHOF are filled with two kinds of thermosensitive liquid with high and low refractive index (RI), respectively. Two separated resonance dips, which are related to the high and low RI filled liquid respectively, are observed at different wavelength in the transmission spectrum. Advantageously, the two dips move towards opposite direction with the temperature variation. The interval between the two SPR dips is measured under different environmental temperature and exhibits a good linearity. The proposed sensor with different detection range is fabricated by changing the RIs of the filled thermosensitive liquids. The temperature sensitivity of 7.72 nm/°C and -7.81 nm/°C is obtained in the range of 20-60 °C and -20-20 °C, respectively. Owing to the high temperature sensitivity and tunable detection range, the proposed sensor is expected to find potential applications in biomedicine, health care and environmental monitoring.

Fiber polarizer based on selectively silver-coated large-core suspended-core fiber.

A tunable fiber polarizer based on the selectively silver-coated large-core suspended-core fiber (LSCF) was proposed. A thin silver layer was coated on the inner surface of two opposite air holes of the LSCF by the chemical liquid-phase deposition method. The $y$-polarized light (parallel to the two silver-coated air holes) will excite surface plasmon resonance and experience large transmission loss, while the $x$-polarized light does not, resulting in a fiber polarizer. By varying the liquid filled in the microchannels of the LSCF, the operating wavelength can be tuned in the visible and near infrared region along with the surface plasmon resonance wavelength. The dependence of the polarization characteristics on the fiber length was experimentally investigated. The maximum polarization extinction ratio (PER) of 20.1 dB, 19.6 dB, and 18.3 dB and insertion loss (IL) of 2.24 dB, 2.56 dB, and 2.08 dB are achieved with the optimal fiber length of 16 cm at the operating wavelengths of 565.4 nm, 626.7 nm, and 739.7 nm, respectively. Compared with the multimode fiber-based polarizers reported previously, the proposed selectively silver-coated LSCF polarizer exhibits higher PER and lower IL.

Dielectric layer thickness insensitive EVA/Ag-coated hollow fiber temperature sensor based on long-range surface plasmon resonance.

A novel hollow fiber temperature sensor (HFTS) based on long-range surface plasmon resonance is presented. The HFTS consists of a dielectric/Ag-coated hollow fiber filled with the thermosensitive liquid and two multimode fibers connected at both ends. By measuring the transmission spectra under different temperatures, the performances, including sensitivity and figure of merit (FOM) of the sensors with different structural parameters, such as thermosensitive liquid property, ethylene-vinyl acetate (EVA) and silver layer thicknesses, were investigated experimentally. The results shows that the sensitivity of the optimized HFTS is 1.60nm/°C to 5.21nm/°C in the range from 20°C to 60°C, and the FOM is up to 0.0453°C-1. Both performances are higher than most reported optical fiber temperature sensors based on surface plasmon resonance. Moreover, the performance of the HFTS is not sensitive to the dielectric layer thickness, which greatly reduces the difficulty of fabrication.

Fiber optic surface plasmon resonance sensor based on a silver-coated large-core suspended-core fiber.

A fiber optic surface plasmon resonance (SPR) sensor based on a silver-coated large-core suspended-core fiber was proposed. A dynamic chemical liquid phase deposition method was adopted to fabricate a set of proposed sensors with different silver layer thicknesses. A stable fully spiced all-fiber sensing system was established to evaluate the performance of the fabricated sensors. The results show that the proposed sensor with a thicker silver layer exhibits higher sensitivity and figure of merit. The performance of the proposed sensor is comparable to those of the conventional solid-core fiber and hollow fiber SPR sensors and much higher than that of the metal nanoparticle functionalized suspended-core fiber sensors.

Long-range surface plasmon resonance sensor based on the GK570/Ag coated hollow fiber with an asymmetric layer structure.

A long-range surface plasmon resonance (LRSPR) sensor based on GK570/Silver coated hollow fiber (HF) with an asymmetric layer structure is proposed. A set of proposed sensors with different layer thicknesses were fabricated by the liquid phase coating method. Both theoretical and experimental analyses were carried out to evaluate the performances of the fabricated sensors, such as sensitivity, figure of merit (FOM) and detection range. The theoretical results based on the ray modal agreed well with the experimental results. The highest experimentally obtained sensitivity and FOM were over 12500 nm/RIU and 150 RIU-1, respectively. The FOM was approximately ten times that of the HF SPR sensor. Moreover, compared to the HF LRSPR sensor with a symmetric layer structure, the proposed sensor has a much larger sensitivity and an approximately double FOM without sacrificing other advantages of the HF LRSPR sensor.

An Optical Fiber Refractive Index Sensor Based on the Hybrid Mode of Tamm and Surface Plasmon Polaritons.

A novel high performance optical fiber refractive index (RI) sensor based on the hybrid transverse magnetic (TM) mode of Tamm plasmon polariton (TPP) and surface plasmon polariton (SPP) is proposed. The structure of the sensor is a multi-mode optical fiber with a one dimensional photonic crystal (1 DPC)/metal multi-films outer coated on its fiber core. A simulation study of the proposed sensor is carried out with the geometrical optical model to investigate the performance of the designed sensor with respect to the center wavelength, bilayer period and the thickness of silver layer. Because the lights transmitted in the fiber sensor have much larger incident angles than those in the prism based sensors, the center wavelength of the 1 DPC should shift to longer wavelength. When the coupling between TM-TPP and SPP is stronger, the sensor exhibits better performance because the electromagnetic field of the TPP-SPP hybrid mode is enhanced more in the analyte. Compared to most conventional fiber surface plasmon resonance sensors, the figure of merit of the proposed sensor is much higher while the sensitivity is comparable. The idea of utilizing TPP-SPP hybrid mode for RI sensing in the solid-core optical fiber structure presented in this paper could contribute to the study of the fiber RI sensor based on TPP.

Improving the performance of hollow fiber surface plasssmon resonance sensor with one dimensional photonic crystal structure.

A high performance hollow fiber (HF) surface plasmon resonance (SPR) sensor utilizing one-dimensional photonic crystal (1DPC) is proposed. The performance of the designed sensor is analyzed theoretically with respect to the center wavelength and the bilayer period. Because the light transmitted in the sensor mostly have large incident angles, the center wavelength of the 1DPC should shift to longer wavelength to ensure the band gap covers the spectrum range of the incident light. The sensor exhibits better performance when the detection spectral range is located in the band gap of 1DPC for incident angle larger than 80°. Compared to conventional HF SPR sensor, the figure of merit (FOM) of the proposed sensor is three to four times higher while the sensitivity is comparable. Moreover, within the limited spectrum range of 400 to 800nm, the proposed sensor have much wider refractive index (RI) detection range and can detect sensed medium with low RI very close to the supporting tube.

Hollow fiber sensor based on metal-cladding waveguide with extended detection range.

A new hollow fiber sensor based on metal-cladding waveguide configuration for the detection of the refractive index of liquid is proposed and demonstrated. Due to the existence of both surface and guided modes in the metal-insulator-metal waveguide, the proposed sensor can detect liquid with refractive index either higher or lower than the insulator layer, which significantly extends the detection range. The characteristics of metal-cladding waveguide is analyzed and presented, while the performance of the sensor is numerically calculated and evaluated. The results evince that, the designed fiber sensor can effectively detect both high and low refractive index liquid by respectively exciting surface mode and guided mode.

[Stability of cantharidin and cantharidic acid in Mylabris aqueous solution].

To investigate the stability and the conversion rules of cantharidin and cantharidic acid contained in the Mylabris aqueous solution under different conditions. The contents of cantharidin and cantharidic acid under different conditions (pH, temperature and light) were determined by HPLC-TQ-MS. The results showed that the content of cantharidin was gradually decreased with the rising of pH value, while on the contrary, the content of cantharidic acid was increased gradually; after Mylabris aqueous solution with different pH values were placed at 25, 40 ℃ and 25 ℃ respectively for lighting for 90 days, the samples were collected for analysis. The results showed the contents of cantharidin and cantharidic acid were changed greatly in the first 10 days, mainly including the decrease of cantharidic acid and increase of cantharidin when the solution was acidic, and the increase of cantharidic acid and decrease of cantharidin when the solution was alkaline. After that, the contents of the above two components basically remained stable. This study revealed that pH was the main factor to affect the contents of cantharidin and cantharidic acid, and they could be converted into each other with the changes of pH value. High temperature and light can accelerate the speed of achieving such balance. The study can provide certain reference for the quality control of the medicines using the Mylabris as raw material.

Surface Plasmon Resonance Sensor Based on Ethylene Tetra-Fluoro-Ethylene Hollow Fiber.

A new kind of hollow fiber surface plasmon resonance sensor (HF-SPRS) based on the silver-coated ethylene tetra-fluoro-ethylene (ETFE) hollow fiber (HF) is presented. The ETFE HF-SPRS is fabricated, and its performance is investigated experimentally by measuring the transmission spectra of the sensor when filled by liquid sensed media with different refractive indices (RIs). Theoretical analysis based on the ray transmission model is also taken to evaluate the sensor. Because the RI of ETFE is much lower than that of fused silica (FSG), the ETFE HF-SPRS can extend the lower limit of the detection range of the early reported FSG HF-SPRS from 1.5 to 1.42 approximately. This could greatly enhance the application potential of HF-SPRS. Moreover, the joint use of both ETFE and FSG HF-SPRSs can cover a wide detection range from 1.42 to 1.69 approximately with high sensitivities larger than 1000 nm/RIU.

Long-range surface plasmon resonance sensor based on dielectric/silver coated hollow fiber with enhanced figure of merit.

A long-range surface plasmon resonance (LRSPR) sensor based on dielectric/silver-coated hollow fiber (HF) is proposed. It can detect the refractive index (RI) of sensed liquid filled in the hollow core of the sensor. A HF LRSPR sensor with 90-nm-thick silver layer and 260-nm-thick OC300 layer is fabricated. Experiments are taken to evaluate the performance of the sensor by measuring the transmission spectra. Theoretical analysis based on a ray model is also taken, and the results agree well with the experimental results. The proposed sensor has similar sensitivity but much smaller SPR dip width than the silver-coated HF SPR sensor. Thus figure of merit of the sensor is enhanced approximately five times. The stability of the sensor is also improved because the dielectric layer acts as a protection layer for the damageable silver layer.

Flexible silver-coated hollow fibers for remote Raman spectroscopic measurements.

A Raman remote spectroscopy system was established by using flexible hollow fibers (HFs) as laser excitation fiber and signal collection fiber. Experimental evaluations with various optical fiber combinations were carried out. Experiments were conducted by using silver-coated HFs as both remote transmission fiber and sample cells for liquid sample detection. Good linearity for concentration detection of liquid was obtained with clean background and signal enhancement. Theoretical analysis was carried out to optimize the length of the liquid cell. Measured data show good agreement with the simulation result. HF has shown potentiality in applications for remote and noninvasive Raman detection.

Optimization of hollow waveguides as absorption cells for spectroscopic gas sensing.

Flexible and low-loss hollow waveguide has many advantages as an absorption cell for spectroscopic gas sensing. The characteristics of the sensing system are dependent on the parameters of the hollow waveguide cell. In this paper, a mathematical model was proposed to analyze the waveguide cell by considering waveguide loss, effective optical path length, and signal-to-noise ratio of the system. Simulation results show that the gas absorption intensity and system sensitivity are dependent not only on the waveguide length but also on the bore-diameter, signal-to-noise ratio, and the concentration of the target gases. The results provide optimizing methods for the sensing system and algorithms for error compensation. Preliminary experiments on concentration detection of methane gas were carried out and measured data showed good agreements with the simulation results.

Hollow fiber surface plasmon resonance sensor for the detection of liquid with high refractive index.

A new kind of surface plasmon resonance (SPR) sensor based on silver-coated hollow fiber (HF) structure for the detection of liquids with high refractive index (RI) is presented. Liquid sensed medium with high RI is filled in the hollow core of the HF and its RI can be detected by measuring the transmission spectra of the HF SPR sensor. The designed sensors with different silver thicknesses are fabricated and the transmission spectra for filled liquids with different RI are measured to investigate the performances of the sensors. Theoretical analysis is also carried out to evaluate the performance. The simulation results agree well with the experimental results. Factors that might affect sensitivity and detection accuracy of the sensor are discussed. The highest sensitivity achieved is 6,607 nm/RIU, which is comparable to the sensitivities of the other reported fiber SPR sensors.

Characterization of cylindrical terahertz metallic hollow waveguide with multiple dielectric layers.

Dielectric-coated metallic hollow waveguides (DMHW) are drawing considerable attention for their application in terahertz (THz) waveguiding. This paper theoretically analyzes the multilayer structure to reduce the transmission and bending loss of DMHW. The efficiency of THz multilayer DMHW depends on a proper selection of dielectric materials and geometrical parameters. The low-loss properties are demonstrated by studying the multilayer gold waveguides with a stack of polypropylene (PP) and Si-doped polypropylene (PP(Si)). Comparisons are made with single-layer Au/PP and Au-only waveguides. The effect of dielectric absorption is discussed in detail. It is found that low index dielectric causes more additional loss than that of high index dielectric layers. Several design considerations for the THz multilayer DMHW are pointed out by studying the effects of multilayer structure parameters with a stack of polyethylene (PE) and TiO(2)-doped polyethylene (PE(TiO2)). We conclude that the inner radius of the waveguide and the refractive indices of the dielectrics tend to be larger in order to reduce the influence of material absorption. An optimal value exists for the total number of layers when the dielectrics are absorptive. The absorption tolerances are pointed out to guarantee a smaller loss for multilayer DMHW than that of metal-only waveguide. Finally, a fabrication method for THz multilayer DMHW Ag/PE/PE(TiO2) is proposed based on co-rolling technique.

Implication of PDGF signaling in cigarette smoke-induced pulmonary arterial hypertension in rat.

Pulmonary artery hypertension (PAH) is a severe disease characterized with progressive increase of pulmonary vascular resistance that finally causes right ventricular failure and premature death. Cigarette smoke (CS) is a major factor of Chronic Obstructive Pulmonary Disease (COPD) that can lead to PAH. However, the mechanism of CS-induced PAH is poorly understood. Mounting evidence supports that pulmonary vascular remodeling play an important role in the development of PAH. PDGF signaling has been demonstrated to be a major mediator of vascular remodeling implicated in PAH. However, the association of PDGF signaling with CS-induced PAH has not been documented. In this study, we investigated CS-induced PAH in rats and the expression of platelet derived growth factor (PDGF) and PDGF receptor (PDGFR) in pulmonary artery. Forty male rats were randomly divided into control group and three experimental groups that were exposed to CS for 1, 2, and 3 months, respectively. CS significantly increased right ventricular systolic pressure (RVSP) and right ventricular hypertrophy index (RVHI). Histology staining demonstrated that CS significantly increased the thickness of pulmonary artery wall and collagen deposition. The expression of PDGF isoform B (PDGF-B) and PDGF receptor beta (PDGFRß) were significantly increased at both protein and mRNA levels in pulmonary artery of rats with CS exposure. Furthermore, Cigarette smoke extract (CSE) significantly increased rat pulmonary artery smooth muscle cell (PASMC) proliferation, which was inhibited by PDGFR inhibitor Imatinib. Thus, our data suggest PDGF signaling is implicated in CS-induced PAH.