Tunable nanomechanical performance regimes in ceramic nanowires.

At the macroscopic size regime, ceramic materials exhibit brittle fracture and catastrophic failure when they are subjected to mechanical loads that exceed their characteristic strength. In this report, we present recoverable plasticity in alpha-phase, potassium stabilized manganese dioxide nanowire (α-K0.13MnO2 NW) crystals when they are subjected to atomic force microscopy (AFM) based three-point bending tests at very low loading rates. The force-deflection curves and AFM scans obtained from these measurements reveal yielding and extended plasticity in the NWs during the loading process, while the large plastic deformation is recovered spontaneously during the unloading process. However, the same material system exhibits failure via fracture at substantially higher strengths when it is subjected to bending tests at nearly an order of magnitude higher loading rates. These results highlight an important new pathway to controllably tune the nanomechanical performance of these technologically important nanoceramics for application-specific needs: either achieve self-reversible and ultra-large plasticity, or achieve substantially higher fracture strengths that approach the intrinsic limits of the material system.

Plastic recovery and self-healing in longitudinally twinned SiGe nanowires.

This paper reports on plastic recovery and self-healing behavior in longitudinally-twinned and [112] orientated SiGe nanowire (NW) beams when they are subjected to large bending strains. The NW alloys are comprised of lamellar nanotwin platelet(s) sandwiched between two semi-cylindrical twins. The loading curves, which are acquired from atomic force microscope (AFM) based three-point bending tests, reveal the onset of plastic deformation at a characteristic stress threshold, followed by further straining of the NWs. This ductility is attributed to dislocation activity within the semi-cylindrical crystal portions of the NW, which are hypothesized to undergo a combination of elastic and plastic straining. On the other hand, the lamellar nanoplatelets undergo purely elastic stretching. During the unloading process, the release of internal elastic stresses enables dislocation backflow and escape at the surface. As a result, the dislocations are predominantly annihilated and the NW samples evidenced self-healing via plastic recovery even at ultra-large strains, which are estimated using finite-element models at 16.3% in one of the tested devices. Finite element analysis also establishes the independence of the observed nanomechanical behavior on the relative orientation of the load with respect to the nanoplatelet. This first observation of reversible plasticity in the SiGe material system, which is aided by a concurrent evolution of segmented elastic and plastic deformation within its grains during the loading process, presents an important new pathway for mechanical stabilization of technologically important group-IV semiconductor nanomaterials.

A 3D nanoelectrokinetic model for predictive assembly of nanowire arrays using floating electrode dielectrophoresis.

Floating electrode dielectrophoresis (FE-DEP) presents a promising avenue for scalable assembly of nanowire (NW) arrays on silicon chips and offers better control in limiting the number of deposited NWs when compared with the conventional, two-electrode DEP process. This article presents a 3D nanoelectrokinetic model, which calculates the imposed electric field and its resultant NW force/velocity maps within the region of influence of an electrode array operating in the FE-DEP configuration. This enables the calculation of NW trajectories and their eventual localization sites on the target electrodes as a function of parameters such as NW starting position, NW size, the applied electric field, suspension concentration, and deposition time. The accuracy of this model has been established through a direct quantitative comparison with the assembly of manganese dioxide NW arrays. Further analysis of the computed data reveals interesting insights into the following aspects: (a) asymmetry in NW localization at electrode sites, and (b) the workspace regions from which NWs are drawn to assemble such that their center-of-mass is located either in the inter-electrode gap region (desired) or on top of one of the assembly electrodes (undesired). This analysis is leveraged to outline a strategy, which involves a physical confinement of the NW suspension within lithographically patterned reservoirs during assembly, for single NW deposition across large arrays with high estimated assembly yields on the order of 87%.